A row in the table of redundancy status and
control for each redundancy-capable port in the
chassis. Entries in the table cannot be
created or deleted via SNMP.
Parsed from file S5erl102.mib.txt
Company: None
Module: S5-ETH-REDUNDANT-LINKS-MIB
A row in the table of redundancy status and
control for each redundancy-capable port in the
chassis. Entries in the table cannot be
created or deleted via SNMP.
Parsed from file S5-ETH-REDUNDANT-LINKS-MIB.mib
Module: S5-ETH-REDUNDANT-LINKS-MIB
Vendor: SynOptics
Module: S5-ETH-REDUNDANT-LINKS-MIB
[Automatically extracted from oidview.com]
s5EnRedPortEntry OBJECT-TYPE SYNTAX S5EnRedPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the table of redundancy status and control for each redundancy-capable port in the chassis. Entries in the table cannot be created or deleted via SNMP." INDEX { s5EnRedPortBrdIndx, s5EnRedPortPortIndx } ::= { s5EnRedPortTable 1 }
s5EnRedPortEntry OBJECT-TYPE SYNTAX S5EnRedPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the table of redundancy status and control for each redundancy-capable port in the chassis. Entries in the table cannot be created or deleted via SNMP." INDEX { s5EnRedPortBrdIndx, s5EnRedPortPortIndx } ::= { s5EnRedPortTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.6.6.1.2.1.1.1 | s5EnRedPortBrdIndx | 0 | 0 | The index of the slot containing the board on which the port is located. |
| 1.3.6.1.4.1.45.1.6.6.1.2.1.1.2 | s5EnRedPortPortIndx | 0 | 0 | The index of the port on the board. |
| 1.3.6.1.4.1.45.1.6.6.1.2.1.1.3 | s5EnRedPortCapability | 0 | 0 | The redundancy capability of the port: hwRedOnly(1).....hardware redundancy only. swRedOnly(2).....software redundacy only. hwAndS… |
| 1.3.6.1.4.1.45.1.6.6.1.2.1.1.4 | s5EnRedPortRedundMode | 0 | 0 | The redundancy mode of the port. The values when written change the redundancy mode, and when read report the redundancy mode: sta… |
| 1.3.6.1.4.1.45.1.6.6.1.2.1.1.5 | s5EnRedPortOperStatus | 0 | 0 | The redundancy status of the port. The values are: other(1).............none of the following. ok(2)...................no fault lo… |
| 1.3.6.1.4.1.45.1.6.6.1.2.1.1.6 | s5EnRedPortRemoteOperStatus | 0 | 0 | This object reflects the real time status of the received data from the remote port. The values are: snpxFLRemFltCpblPortUp(1)...… |
| 1.3.6.1.4.1.45.1.6.6.1.2.1.1.7 | s5EnRedPortRemFltSelectMode | 0 | 0 | This mode specifies the set of local fault events which will cause a switchover. The values are: synoptics(1)..The SynOptics Tx R… |
| 1.3.6.1.4.1.45.1.6.6.1.2.1.1.8 | s5EnRedPortTxMode | 0 | 0 | The Transmit Fiber Mode, which determines the port transmit idle. The values are: autoCfg(1)...The port will auto configure based… |
| 1.3.6.1.4.1.45.1.6.6.1.2.1.1.9 | s5EnRedPortFaults | 0 | 0 | A count of local or remote faults on this port. This counter increments on a transition between the fault and no-fault states. |
| 1.3.6.1.4.1.45.1.6.6.1.2.1.1.10 | s5EnRedPortModeChanges | 0 | 0 | A count of the number of times this port has transitioned from standby mode to non-standby mode (includes active mode and standal… |
| 1.3.6.1.4.1.45.1.6.6.1.2.1.1.11 | s5EnRedPortCompanionBrdNum | 0 | 0 | The index of the slot containing the board of the other port in the redundant pair. If the port (whose slot-port identity is give… |
| 1.3.6.1.4.1.45.1.6.6.1.2.1.1.12 | s5EnRedPortCompanionPortNum | 0 | 0 | The index of the other port in the redundant pair. If the port (whose slot-port identity is given by the instance) is hardware-re… |
| 1.3.6.1.4.1.45.1.6.6.1.2.1.1.13 | s5EnRedPortSwitchoverStatus | 0 | 0 | The switchover status of the port (and its companion). The following values can be written: timedSwitchover(2)...cause a timed sw… |
| 1.3.6.1.4.1.45.1.6.6.1.2.1.1.14 | s5EnRedPortSwitchoverTime | 0 | 0 | The length of time between switching over a redundant port pair and switching back, when a timed switchover is done to the port. … |