The index of the other port in the redundant pair.
If the port (whose slot-port identity is given by
the instance) is hardware-redundant capable, this object
has the value of the port number of the (potential)
redundant companion, even if the port is in standalone
mode. This allows the network manager to determine
the identity of the potential companion, which is fixed
by the hardware of the board.
Changing this object is permitted only when creating a
software-redundant pair.
Parsed from file S5erl102.mib.txt
Company: None
Module: S5-ETH-REDUNDANT-LINKS-MIB
The index of the other port in the redundant pair.
If the port (whose slot-port identity is given by
the instance) is hardware-redundant capable, this object
has the value of the port number of the (potential)
redundant companion, even if the port is in standalone
mode. This allows the network manager to determine
the identity of the potential companion, which is fixed
by the hardware of the board.
Changing this object is permitted only when creating a
software-redundant pair.
Parsed from file S5-ETH-REDUNDANT-LINKS-MIB.mib
Module: S5-ETH-REDUNDANT-LINKS-MIB
Vendor: SynOptics
Module: S5-ETH-REDUNDANT-LINKS-MIB
[Automatically extracted from oidview.com]
s5EnRedPortCompanionPortNum OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The index of the other port in the redundant pair. If the port (whose slot-port identity is given by the instance) is hardware-redundant capable, this object has the value of the port number of the (potential) redundant companion, even if the port is in standalone mode. This allows the network manager to determine the identity of the potential companion, which is fixed by the hardware of the board. Changing this object is permitted only when creating a software-redundant pair." ::= { s5EnRedPortEntry 12 }
s5EnRedPortCompanionPortNum OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The index of the other port in the redundant pair. If the port (whose slot-port identity is given by the instance) is hardware-redundant capable, this object has the value of the port number of the (potential) redundant companion, even if the port is in standalone mode. This allows the network manager to determine the identity of the potential companion, which is fixed by the hardware of the board. Changing this object is permitted only when creating a software-redundant pair." ::= { s5EnRedPortEntry 12 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.6.6.1.2.1.1.1 | s5EnRedPortBrdIndx | 0 | 0 | The index of the slot containing the board on which the port is located. |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.2 | s5EnRedPortPortIndx | 0 | 0 | The index of the port on the board. |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.3 | s5EnRedPortCapability | 0 | 0 | The redundancy capability of the port: hwRedOnly(1).....hardware redundancy only. swRedOnly(2).....software redundacy only. hwAndS… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.4 | s5EnRedPortRedundMode | 0 | 0 | The redundancy mode of the port. The values when written change the redundancy mode, and when read report the redundancy mode: sta… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.5 | s5EnRedPortOperStatus | 0 | 0 | The redundancy status of the port. The values are: other(1).............none of the following. ok(2)...................no fault lo… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.6 | s5EnRedPortRemoteOperStatus | 0 | 0 | This object reflects the real time status of the received data from the remote port. The values are: snpxFLRemFltCpblPortUp(1)...… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.7 | s5EnRedPortRemFltSelectMode | 0 | 0 | This mode specifies the set of local fault events which will cause a switchover. The values are: synoptics(1)..The SynOptics Tx R… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.8 | s5EnRedPortTxMode | 0 | 0 | The Transmit Fiber Mode, which determines the port transmit idle. The values are: autoCfg(1)...The port will auto configure based… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.9 | s5EnRedPortFaults | 0 | 0 | A count of local or remote faults on this port. This counter increments on a transition between the fault and no-fault states. |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.10 | s5EnRedPortModeChanges | 0 | 0 | A count of the number of times this port has transitioned from standby mode to non-standby mode (includes active mode and standal… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.11 | s5EnRedPortCompanionBrdNum | 0 | 0 | The index of the slot containing the board of the other port in the redundant pair. If the port (whose slot-port identity is give… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.13 | s5EnRedPortSwitchoverStatus | 0 | 0 | The switchover status of the port (and its companion). The following values can be written: timedSwitchover(2)...cause a timed sw… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.14 | s5EnRedPortSwitchoverTime | 0 | 0 | The length of time between switching over a redundant port pair and switching back, when a timed switchover is done to the port. … |