The length of time between switching over a redundant
port pair and switching back, when a timed switchover
is done to the port. This object can only be written
in the same request that sets
s5EnRedPortSwitchoverStatus to timedSwitchover(2).
Afterwards, it indicates the amount of time left
before the timed switchover is completed, at which
time another switchover occurs and
s5EnRedSwitchoverStatus is changed to other(1). This
object has the value of zero if the port is not
undergoing a timed switchover, or if the amount of
time is not available.
Parsed from file S5erl102.mib.txt
Company: None
Module: S5-ETH-REDUNDANT-LINKS-MIB
The length of time between switching over a redundant
port pair and switching back, when a timed switchover
is done to the port. This object can only be written
in the same request that sets
s5EnRedPortSwitchoverStatus to timedSwitchover(2).
Afterwards, it indicates the amount of time left
before the timed switchover is completed, at which
time another switchover occurs and
s5EnRedSwitchoverStatus is changed to other(1). This
object has the value of zero if the port is not
undergoing a timed switchover, or if the amount of
time is not available.
Parsed from file S5-ETH-REDUNDANT-LINKS-MIB.mib
Module: S5-ETH-REDUNDANT-LINKS-MIB
Vendor: SynOptics
Module: S5-ETH-REDUNDANT-LINKS-MIB
[Automatically extracted from oidview.com]
s5EnRedPortSwitchoverTime OBJECT-TYPE SYNTAX TimeIntervalSec (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The length of time between switching over a redundant port pair and switching back, when a timed switchover is done to the port. This object can only be written in the same request that sets s5EnRedPortSwitchoverStatus to timedSwitchover(2). Afterwards, it indicates the amount of time left before the timed switchover is completed, at which time another switchover occurs and s5EnRedSwitchoverStatus is changed to other(1). This object has the value of zero if the port is not undergoing a timed switchover, or if the amount of time is not available." ::= { s5EnRedPortEntry 14 }
s5EnRedPortSwitchoverTime OBJECT-TYPE SYNTAX TimeIntervalSec (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The length of time between switching over a redundant port pair and switching back, when a timed switchover is done to the port. This object can only be written in the same request that sets s5EnRedPortSwitchoverStatus to timedSwitchover(2). Afterwards, it indicates the amount of time left before the timed switchover is completed, at which time another switchover occurs and s5EnRedSwitchoverStatus is changed to other(1). This object has the value of zero if the port is not undergoing a timed switchover, or if the amount of time is not available." ::= { s5EnRedPortEntry 14 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.6.6.1.2.1.1.1 | s5EnRedPortBrdIndx | 0 | 0 | The index of the slot containing the board on which the port is located. |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.2 | s5EnRedPortPortIndx | 0 | 0 | The index of the port on the board. |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.3 | s5EnRedPortCapability | 0 | 0 | The redundancy capability of the port: hwRedOnly(1).....hardware redundancy only. swRedOnly(2).....software redundacy only. hwAndS… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.4 | s5EnRedPortRedundMode | 0 | 0 | The redundancy mode of the port. The values when written change the redundancy mode, and when read report the redundancy mode: sta… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.5 | s5EnRedPortOperStatus | 0 | 0 | The redundancy status of the port. The values are: other(1).............none of the following. ok(2)...................no fault lo… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.6 | s5EnRedPortRemoteOperStatus | 0 | 0 | This object reflects the real time status of the received data from the remote port. The values are: snpxFLRemFltCpblPortUp(1)...… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.7 | s5EnRedPortRemFltSelectMode | 0 | 0 | This mode specifies the set of local fault events which will cause a switchover. The values are: synoptics(1)..The SynOptics Tx R… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.8 | s5EnRedPortTxMode | 0 | 0 | The Transmit Fiber Mode, which determines the port transmit idle. The values are: autoCfg(1)...The port will auto configure based… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.9 | s5EnRedPortFaults | 0 | 0 | A count of local or remote faults on this port. This counter increments on a transition between the fault and no-fault states. |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.10 | s5EnRedPortModeChanges | 0 | 0 | A count of the number of times this port has transitioned from standby mode to non-standby mode (includes active mode and standal… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.11 | s5EnRedPortCompanionBrdNum | 0 | 0 | The index of the slot containing the board of the other port in the redundant pair. If the port (whose slot-port identity is give… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.12 | s5EnRedPortCompanionPortNum | 0 | 0 | The index of the other port in the redundant pair. If the port (whose slot-port identity is given by the instance) is hardware-re… |
1.3.6.1.4.1.45.1.6.6.1.2.1.1.13 | s5EnRedPortSwitchoverStatus | 0 | 0 | The switchover status of the port (and its companion). The following values can be written: timedSwitchover(2)...cause a timed sw… |