This attribute specifies the default policy which is applied when
calculating the fairness weight for unshaped connections of the
CBR service category. The fairness weight for a connection
determines the relative amount of bandwidth which that connection
obtains, compared to other connections in the same service
category. Connections with equal weight get equal transmit
opportunities. Connections with higher weights get more transmit
opportunities compared with connections that have lower weights.
An override to this default may be specified for a provisioned
connection under the Vcd Tm or Vpd Tm component.
The fairness weight for a connection is directly proportional to the
value of one of the traffic descriptor parameters for that connection.
This attribute specifies which traffic descriptor parameter is used for
connections of the CBR service category.
This attribute is ignored on CQC-based ATM cards. This attribute is
also ignored on ATM IP cards if unshapedTransmitQueueing is set
for common queuing.
If this attribute is set to scr, the fairness weight is proportional to the
transmit sustained cell rate (SCR) of a connection. Connections
with a higher SCR have a higher fairness weight. For connections
with txTrafficDescType 3, which have no SCR, the sustained cell
rate is assumed to be equal to the peak cell rate.
If this attribute is set to pcr, the fairness weight is proportional to
the transmit peak cell rate (PCR) of a connection. Connections with
a higher PCR have a higher fairness weight. Connections with
txTrafficDescType 1 or 2 get a minimum weight, which is 1.
If this attribute is set to ecr, the fairness weight is proportional to
the equivalent cell rate (ECR) of a connection as calculated by
connection admission control (CAC). Connections with a higher
ECR have a higher fairness weight. Connections with an ECR of 0
get a minimum weight, which is 1.
The weight of a connection is visible in the Vcc Tm, Vpc Tm, or Vpt
Tm weight attribute.
This attribute does not apply to standard Vpt Vccs and basic Vpts.
Parsed from file nortelPP-atmCoreV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-AtmCoreMIB
This attribute specifies the default policy which is applied when
calculating the fairness weight for unshaped connections of the
CBR service category. The fairness weight for a connection
determines the relative amount of bandwidth which that connection
obtains, compared to other connections in the same service
category. Connections with equal weight get equal transmit
opportunities. Connections with higher weights get more transmit
opportunities compared with connections that have lower weights.
An override to this default may be specified for a provisioned
connection under the Vcd Tm or Vpd Tm component.
The fairness weight for a connection is directly proportional to the
value of one of the traffic descriptor parameters for that connection.
This attribute specifies which traffic descriptor parameter is used for
connections of the CBR service category.
This attribute is ignored on CQC-based ATM cards. This attribute is
also ignored on ATM IP cards if unshapedTransmitQueueing is set
for common queuing.
If this attribute is set to scr, the fairness weight is proportional to the
transmit sustained cell rate (SCR) of a connection. Connections
with a higher SCR have a higher fairness weight. For connections
with txTrafficDescType 3, which have no SCR, the sustained cell
rate is assumed to be equal to the peak cell rate.
If this attribute is set to pcr, the fairness weight is proportional to
the transmit peak cell rate (PCR) of a connection. Connections with
a higher PCR have a higher fairness weight. Connections with
txTrafficDescType 1 or 2 get a minimum weight, which is 1.
If this attribute is set to ecr, the fairness weight is proportional to
the equivalent cell rate (ECR) of a connection as calculated by
connection admission control (CAC). Connections with a higher
ECR have a higher fairness weight. Connections with an ECR of 0
get a minimum weight, which is 1.
The weight of a connection is visible in the Vcc Tm, Vpc Tm, or Vpt
Tm weight attribute.
This attribute does not apply to standard Vpt Vccs and basic Vpts.
Parsed from file Nortel-Magellan-Passport-AtmCoreMIB.mib
Module: Nortel-Magellan-Passport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-AtmCoreMIB
[Automatically extracted from oidview.com]
atmIfCACbrWeightPolicy OBJECT-TYPE SYNTAX INTEGER { scr(1), pcr(2), ecr(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default policy which is applied when calculating the fairness weight for unshaped connections of the CBR service category. The fairness weight for a connection determines the relative amount of bandwidth which that connection obtains, compared to other connections in the same service category. Connections with equal weight get equal transmit opportunities. Connections with higher weights get more transmit opportunities compared with connections that have lower weights. An override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. The fairness weight for a connection is directly proportional to the value of one of the traffic descriptor parameters for that connection. This attribute specifies which traffic descriptor parameter is used for connections of the CBR service category. This attribute is ignored on CQC-based ATM cards. This attribute is also ignored on ATM IP cards if unshapedTransmitQueueing is set for common queuing. If this attribute is set to scr, the fairness weight is proportional to the transmit sustained cell rate (SCR) of a connection. Connections with a higher SCR have a higher fairness weight. For connections with txTrafficDescType 3, which have no SCR, the sustained cell rate is assumed to be equal to the peak cell rate. If this attribute is set to pcr, the fairness weight is proportional to the transmit peak cell rate (PCR) of a connection. Connections with a higher PCR have a higher fairness weight. Connections with txTrafficDescType 1 or 2 get a minimum weight, which is 1. If this attribute is set to ecr, the fairness weight is proportional to the equivalent cell rate (ECR) of a connection as calculated by connection admission control (CAC). Connections with a higher ECR have a higher fairness weight. Connections with an ECR of 0 get a minimum weight, which is 1. The weight of a connection is visible in the Vcc Tm, Vpc Tm, or Vpt Tm weight attribute. This attribute does not apply to standard Vpt Vccs and basic Vpts." DEFVAL { ecr } ::= { atmIfCACbrProvEntry 165 }
atmIfCACbrWeightPolicy OBJECT-TYPE SYNTAX INTEGER { scr(1), pcr(2), ecr(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default policy which is applied when calculating the fairness weight for unshaped connections of the CBR service category. The fairness weight for a connection determines the relative amount of bandwidth which that connection obtains, compared to other connections in the same service category. Connections with equal weight get equal transmit opportunities. Connections with higher weights get more transmit opportunities compared with connections that have lower weights. An override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. The fairness weight for a connection is directly proportional to the value of one of the traffic descriptor parameters for that connection. This attribute specifies which traffic descriptor parameter is used for connections of the CBR service category. This attribute is ignored on CQC-based ATM cards. This attribute is also ignored on ATM IP cards if unshapedTransmitQueueing is set for common queuing. If this attribute is set to scr, the fairness weight is proportional to the transmit sustained cell rate (SCR) of a connection. Connections with a higher SCR have a higher fairness weight. For connections with txTrafficDescType 3, which have no SCR, the sustained cell rate is assumed to be equal to the peak cell rate. If this attribute is set to pcr, the fairness weight is proportional to the transmit peak cell rate (PCR) of a connection. Connections with a higher PCR have a higher fairness weight. Connections with txTrafficDescType 1 or 2 get a minimum weight, which is 1. If this attribute is set to ecr, the fairness weight is proportional to the equivalent cell rate (ECR) of a connection as calculated by connection admission control (CAC). Connections with a higher ECR have a higher fairness weight. Connections with an ECR of 0 get a minimum weight, which is 1. The weight of a connection is visible in the Vcc Tm, Vpc Tm, or Vpt Tm weight attribute. This attribute does not apply to standard Vpt Vccs and basic Vpts." DEFVAL { ecr } ::= { atmIfCACbrProvEntry 165 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.10 | atmIfCACbrProvPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the constant bit rate (CBR) service category except f… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.20 | atmIfCACbrProvCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the CBR service category excep… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.30 | atmIfCACbrCdv | 0 | 0 | This attribute specifies the peak-to-peak cell delay variation (CDV) which is contributed to the entire ATM Interface for CBR tr… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.40 | atmIfCACbrMaxCtd | 0 | 0 | This attribute specifies the maximum cell transfer delay (MaxCTD) which is applied to the entire ATM Interface for CBR traffic. … |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.50 | atmIfCACbrProvClr | 0 | 0 | This attribute specifies the tolerable cell loss ratio (CLR) for CBR traffic except for connections managed by a Vpt CA. The num… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.60 | atmIfCACbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the CBR service c… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.61 | atmIfCACbrHoldingPriority | 0 | 0 | This attribute specifies the holding priority which applies to SVP and SVC CBR connections. It takes a value from 0 (highest prio… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.70 | atmIfCACbrSvcHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC CBR connections. It takes a value from 0 (highest pri… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.71 | atmIfCACbrSvcMpHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC CBR point-to-multipoint connections. It takes a value… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.80 | atmIfCACbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the CBR service category. This attribut… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.90 | atmIfCACbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the CB… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.100 | atmIfCACbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. This attribute specifies the emission priority (EP) whi… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.140 | atmIfCACbrTrafficShaping | 0 | 0 | This attribute specifies the default traffic shaping option for connections of the CBR service category. An override to this def… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.150 | atmIfCACbrShapeRecoupPolicy | 0 | 0 | This attribute specifies the shaping recoup policy for the CBR service category. This is the policy which is used to recoup shap… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.160 | atmIfCACbrUnshapedTransmitQueueing | 0 | 0 | This attribute specifies the default queuing option for unshaped connections of the CBR service category. On ATM IP cards, this a… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.169 | atmIfCACbrForceTagging | 0 | 0 | This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all CBR connections. An override to th… |
| 1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.170 | atmIfCACbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the CBR service category. This attr… |