This attribute specifies the default cell delay variation tolerance
(CDVT) for all connections of the CBR service category except
those managed by a Vpt CA. An override to this default may be
specified for a provisioned connection under the Vcd Tm or Vpd Tm
component.
This attribute is used by the CAC function to compute the
equivalent cell rate (ECR) required by a given CBR connection. The
larger the value of CDVT, the larger is its ECR.
If Usage Parameter Control (UPC) is enabled for a connection,
CDVT is used by the UPC function to decide whether a cell is
conforming or non-conforming based on the connection's traffic
descriptor type. The larger the CDVT value, the more tolerant is the
UPC of bandwidth usage beyond the traffic contract.
Parsed from file nortelPP-atmCoreV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-AtmCoreMIB
This attribute specifies the default cell delay variation tolerance
(CDVT) for all connections of the CBR service category except
those managed by a Vpt CA. An override to this default may be
specified for a provisioned connection under the Vcd Tm or Vpd Tm
component.
This attribute is used by the CAC function to compute the
equivalent cell rate (ECR) required by a given CBR connection. The
larger the value of CDVT, the larger is its ECR.
If Usage Parameter Control (UPC) is enabled for a connection,
CDVT is used by the UPC function to decide whether a cell is
conforming or non-conforming based on the connection's traffic
descriptor type. The larger the CDVT value, the more tolerant is the
UPC of bandwidth usage beyond the traffic contract.
Parsed from file Nortel-Magellan-Passport-AtmCoreMIB.mib
Module: Nortel-Magellan-Passport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-AtmCoreMIB
[Automatically extracted from oidview.com]
atmIfCACbrProvCdvt OBJECT-TYPE SYNTAX Unsigned32 (1..10000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the CBR service category except those managed by a Vpt CA. An override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. This attribute is used by the CAC function to compute the equivalent cell rate (ECR) required by a given CBR connection. The larger the value of CDVT, the larger is its ECR. If Usage Parameter Control (UPC) is enabled for a connection, CDVT is used by the UPC function to decide whether a cell is conforming or non-conforming based on the connection's traffic descriptor type. The larger the CDVT value, the more tolerant is the UPC of bandwidth usage beyond the traffic contract." DEFVAL { 250 } ::= { atmIfCACbrProvEntry 20 }
atmIfCACbrProvCdvt OBJECT-TYPE SYNTAX Unsigned32 (1..10000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the CBR service category except those managed by a Vpt CA. An override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. This attribute is used by the CAC function to compute the equivalent cell rate (ECR) required by a given CBR connection. The larger the value of CDVT, the larger is its ECR. If Usage Parameter Control (UPC) is enabled for a connection, CDVT is used by the UPC function to decide whether a cell is conforming or non-conforming based on the connection's traffic descriptor type. The larger the CDVT value, the more tolerant is the UPC of bandwidth usage beyond the traffic contract." DEFVAL { 250 } ::= { atmIfCACbrProvEntry 20 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.10 | atmIfCACbrProvPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the constant bit rate (CBR) service category except f… |
1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.30 | atmIfCACbrCdv | 0 | 0 | This attribute specifies the peak-to-peak cell delay variation (CDV) which is contributed to the entire ATM Interface for CBR tr… |
1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.40 | atmIfCACbrMaxCtd | 0 | 0 | This attribute specifies the maximum cell transfer delay (MaxCTD) which is applied to the entire ATM Interface for CBR traffic. … |
1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.50 | atmIfCACbrProvClr | 0 | 0 | This attribute specifies the tolerable cell loss ratio (CLR) for CBR traffic except for connections managed by a Vpt CA. The num… |
1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.60 | atmIfCACbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the CBR service c… |
1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.61 | atmIfCACbrHoldingPriority | 0 | 0 | This attribute specifies the holding priority which applies to SVP and SVC CBR connections. It takes a value from 0 (highest prio… |
1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.70 | atmIfCACbrSvcHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC CBR connections. It takes a value from 0 (highest pri… |
1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.71 | atmIfCACbrSvcMpHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC CBR point-to-multipoint connections. It takes a value… |
1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.80 | atmIfCACbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the CBR service category. This attribut… |
1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.90 | atmIfCACbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the CB… |
1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.100 | atmIfCACbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. This attribute specifies the emission priority (EP) whi… |
1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.140 | atmIfCACbrTrafficShaping | 0 | 0 | This attribute specifies the default traffic shaping option for connections of the CBR service category. An override to this def… |
1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.150 | atmIfCACbrShapeRecoupPolicy | 0 | 0 | This attribute specifies the shaping recoup policy for the CBR service category. This is the policy which is used to recoup shap… |
1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.160 | atmIfCACbrUnshapedTransmitQueueing | 0 | 0 | This attribute specifies the default queuing option for unshaped connections of the CBR service category. On ATM IP cards, this a… |
1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.165 | atmIfCACbrWeightPolicy | 0 | 0 | This attribute specifies the default policy which is applied when calculating the fairness weight for unshaped connections of th… |
1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.169 | atmIfCACbrForceTagging | 0 | 0 | This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all CBR connections. An override to th… |
1.3.6.1.4.1.562.2.4.1.114.3.2.100.1.170 | atmIfCACbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the CBR service category. This attr… |