This attribute specifies the default cell delay variation tolerance
(CDVT) for all connections of the rt-VBR service category. An
override to this default may be specified for a provisioned
connection under the Vcd Tm or Vpd Tm component.
If Usage Parameter Control (UPC) is enabled for a connection,
CDVT is used by the UPC function to decide whether a cell is
conforming or non-conforming based on the connection's traffic
descriptor type. The larger the CDVT value, the more tolerant is the
UPC to bandwidth usage beyond the traffic contract.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the default cell delay variation tolerance
(CDVT) for all connections of the rt-VBR service category. An
override to this default may be specified for a provisioned
connection under the Vcd Tm or Vpd Tm component.
If Usage Parameter Control (UPC) is enabled for a connection,
CDVT is used by the UPC function to decide whether a cell is
conforming or non-conforming based on the connection's traffic
descriptor type. The larger the CDVT value, the more tolerant is the
UPC to bandwidth usage beyond the traffic contract.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCARtVbrCdvt OBJECT-TYPE SYNTAX Unsigned32 (1..1200000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the rt-VBR service category. An override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. If Usage Parameter Control (UPC) is enabled for a connection, CDVT is used by the UPC function to decide whether a cell is conforming or non-conforming based on the connection's traffic descriptor type. The larger the CDVT value, the more tolerant is the UPC to bandwidth usage beyond the traffic contract." DEFVAL { 250 } ::= { mscAtmIfCARtVbrProvEntry 20 }
mscAtmIfCARtVbrCdvt OBJECT-TYPE SYNTAX Unsigned32 (1..1200000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the rt-VBR service category. An override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. If Usage Parameter Control (UPC) is enabled for a connection, CDVT is used by the UPC function to decide whether a cell is conforming or non-conforming based on the connection's traffic descriptor type. The larger the CDVT value, the more tolerant is the UPC to bandwidth usage beyond the traffic contract." DEFVAL { 250 } ::= { mscAtmIfCARtVbrProvEntry 20 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.10 | mscAtmIfCARtVbrPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the real-time variable bit rate (rt-VBR) service cate… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.30 | mscAtmIfCARtVbrCdv | 0 | 0 | This attribute specifies the peak-to-peak cell delay variation (CDV) which is contributed to the entire ATM Interface for rt-VBR… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.40 | mscAtmIfCARtVbrMaxCtd | 0 | 0 | This attribute specifies the maximum cell transfer delay (MaxCTD) which is applied to the entire ATM Interface for rt-VBR traffi… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.50 | mscAtmIfCARtVbrCellLossRatio | 0 | 0 | This attribute specifies the tolerable cell loss ratio (CLR) for rt- VBR traffic except for connections managed by a Vpt CA. The… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.60 | mscAtmIfCARtVbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the rt-VBR servi… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.70 | mscAtmIfCARtVbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the rt-VBR service category. The queue … |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.75 | mscAtmIfCARtVbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the rt… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.76 | mscAtmIfCARtVbrHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVP and SVC rt-VBR connections. It takes a value from 0 (… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.80 | mscAtmIfCARtVbrSvcHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC rt-VBR connections. It takes a value from 0 (highest … |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.81 | mscAtmIfCARtVbrSvcMpHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC rt-VBR point-to-multipoint connections. It takes a va… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.82 | mscAtmIfCARtVbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. For the 1pOC48SmSrAtm card, only the default value is s… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.86 | mscAtmIfCARtVbrTrafficShaping | 0 | 0 | This attribute specifies the default traffic shaping option for connections of the rt-VBR service category. An override to this d… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.87 | mscAtmIfCARtVbrShapeRecoupPolicy | 0 | 0 | This attribute specifies the shaping recoup policy for the rt-VBR service category. This is the policy which is used to recoup s… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.88 | mscAtmIfCARtVbrUnshapedTransmitQueueing | 0 | 0 | This attribute specifies the default queuing option for unshaped connections of the rt-VBR service category. This attribute cont… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.89 | mscAtmIfCARtVbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the rt-VBR service category. This a… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.90 | mscAtmIfCARtVbrWeightPolicy | 0 | 0 | This attribute specifies the policy which is applied when calculating the fairness weight for unshaped connections of the rt-VBR… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.91 | mscAtmIfCARtVbrForceTagging | 0 | 0 | This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all rt-VBR connections. An override to… |