This attribute specifies the policy which is applied when calculating
the fairness weight for unshaped connections of the rt-VBR service
category. The fairness weight for a connection determines the
relative amount of bandwidth which that connection obtains,
compared to other connections in the same service category.
Connections with equal weight get equal transmit opportunities.
Connections with higher weights get more transmit opportunities
compared with connections that have lower weights. An override to
this default may be specified for a provisioned connection under the
Vcd Tm or Vpd Tm component.
The fairness weight for a connection is directly proportional to the
value of one of the traffic descriptor parameters for that connection.
This attribute specifies which traffic descriptor parameter is used for
connections of the rt-VBR service category.
This attribute is ignored on CQC-based ATM cards and the
1pOC48SmSrAtm card. This attribute is also ignored on ATM IP
cards if unshapedTransmitQueueing is set for common queuing.
If this attribute is set to scr, the fairness weight is proportional to the
transmit sustained cell rate (SCR) of a connection. Connections
with a higher SCR have a higher fairness weight. For connections
with txTrafficDescType 3, which have no SCR, the sustained cell
rate is assumed to be equal to the peak cell rate.
If this attribute is set to pcr, the fairness weight is proportional to
the transmit peak cell rate (PCR) of a connection. Connections with
a higher PCR have a higher fairness weight. Connections with
txTrafficDescType 1 or 2 get a minimum weight, which is 1.
If this attribute is set to ecr, the fairness weight is proportional to
the equivalent cell rate (ECR) of a connection as calculated by
connection admission control (CAC). Connections with a higher
ECR have a higher fairness weight. Connections with an ECR of 0
get a minimum weight, which is 1.
The weight of a connection is visible in the Vcc Tm, Vpc Tm, or Vpt
Tm weight attribute.
This attribute does not apply to basic Vpts, and standard Vpt Vccs.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the policy which is applied when calculating
the fairness weight for unshaped connections of the rt-VBR service
category. The fairness weight for a connection determines the
relative amount of bandwidth which that connection obtains,
compared to other connections in the same service category.
Connections with equal weight get equal transmit opportunities.
Connections with higher weights get more transmit opportunities
compared with connections that have lower weights. An override to
this default may be specified for a provisioned connection under the
Vcd Tm or Vpd Tm component.
The fairness weight for a connection is directly proportional to the
value of one of the traffic descriptor parameters for that connection.
This attribute specifies which traffic descriptor parameter is used for
connections of the rt-VBR service category.
This attribute is ignored on CQC-based ATM cards and the
1pOC48SmSrAtm card. This attribute is also ignored on ATM IP
cards if unshapedTransmitQueueing is set for common queuing.
If this attribute is set to scr, the fairness weight is proportional to the
transmit sustained cell rate (SCR) of a connection. Connections
with a higher SCR have a higher fairness weight. For connections
with txTrafficDescType 3, which have no SCR, the sustained cell
rate is assumed to be equal to the peak cell rate.
If this attribute is set to pcr, the fairness weight is proportional to
the transmit peak cell rate (PCR) of a connection. Connections with
a higher PCR have a higher fairness weight. Connections with
txTrafficDescType 1 or 2 get a minimum weight, which is 1.
If this attribute is set to ecr, the fairness weight is proportional to
the equivalent cell rate (ECR) of a connection as calculated by
connection admission control (CAC). Connections with a higher
ECR have a higher fairness weight. Connections with an ECR of 0
get a minimum weight, which is 1.
The weight of a connection is visible in the Vcc Tm, Vpc Tm, or Vpt
Tm weight attribute.
This attribute does not apply to basic Vpts, and standard Vpt Vccs.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCARtVbrWeightPolicy OBJECT-TYPE SYNTAX INTEGER { scr(1), pcr(2), ecr(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the policy which is applied when calculating the fairness weight for unshaped connections of the rt-VBR service category. The fairness weight for a connection determines the relative amount of bandwidth which that connection obtains, compared to other connections in the same service category. Connections with equal weight get equal transmit opportunities. Connections with higher weights get more transmit opportunities compared with connections that have lower weights. An override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. The fairness weight for a connection is directly proportional to the value of one of the traffic descriptor parameters for that connection. This attribute specifies which traffic descriptor parameter is used for connections of the rt-VBR service category. This attribute is ignored on CQC-based ATM cards and the 1pOC48SmSrAtm card. This attribute is also ignored on ATM IP cards if unshapedTransmitQueueing is set for common queuing. If this attribute is set to scr, the fairness weight is proportional to the transmit sustained cell rate (SCR) of a connection. Connections with a higher SCR have a higher fairness weight. For connections with txTrafficDescType 3, which have no SCR, the sustained cell rate is assumed to be equal to the peak cell rate. If this attribute is set to pcr, the fairness weight is proportional to the transmit peak cell rate (PCR) of a connection. Connections with a higher PCR have a higher fairness weight. Connections with txTrafficDescType 1 or 2 get a minimum weight, which is 1. If this attribute is set to ecr, the fairness weight is proportional to the equivalent cell rate (ECR) of a connection as calculated by connection admission control (CAC). Connections with a higher ECR have a higher fairness weight. Connections with an ECR of 0 get a minimum weight, which is 1. The weight of a connection is visible in the Vcc Tm, Vpc Tm, or Vpt Tm weight attribute. This attribute does not apply to basic Vpts, and standard Vpt Vccs." DEFVAL { ecr } ::= { mscAtmIfCARtVbrProvEntry 90 }
mscAtmIfCARtVbrWeightPolicy OBJECT-TYPE SYNTAX INTEGER { scr(1), pcr(2), ecr(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the policy which is applied when calculating the fairness weight for unshaped connections of the rt-VBR service category. The fairness weight for a connection determines the relative amount of bandwidth which that connection obtains, compared to other connections in the same service category. Connections with equal weight get equal transmit opportunities. Connections with higher weights get more transmit opportunities compared with connections that have lower weights. An override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. The fairness weight for a connection is directly proportional to the value of one of the traffic descriptor parameters for that connection. This attribute specifies which traffic descriptor parameter is used for connections of the rt-VBR service category. This attribute is ignored on CQC-based ATM cards and the 1pOC48SmSrAtm card. This attribute is also ignored on ATM IP cards if unshapedTransmitQueueing is set for common queuing. If this attribute is set to scr, the fairness weight is proportional to the transmit sustained cell rate (SCR) of a connection. Connections with a higher SCR have a higher fairness weight. For connections with txTrafficDescType 3, which have no SCR, the sustained cell rate is assumed to be equal to the peak cell rate. If this attribute is set to pcr, the fairness weight is proportional to the transmit peak cell rate (PCR) of a connection. Connections with a higher PCR have a higher fairness weight. Connections with txTrafficDescType 1 or 2 get a minimum weight, which is 1. If this attribute is set to ecr, the fairness weight is proportional to the equivalent cell rate (ECR) of a connection as calculated by connection admission control (CAC). Connections with a higher ECR have a higher fairness weight. Connections with an ECR of 0 get a minimum weight, which is 1. The weight of a connection is visible in the Vcc Tm, Vpc Tm, or Vpt Tm weight attribute. This attribute does not apply to basic Vpts, and standard Vpt Vccs." DEFVAL { ecr } ::= { mscAtmIfCARtVbrProvEntry 90 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.10 | mscAtmIfCARtVbrPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the real-time variable bit rate (rt-VBR) service cate… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.20 | mscAtmIfCARtVbrCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the rt-VBR service category. A… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.30 | mscAtmIfCARtVbrCdv | 0 | 0 | This attribute specifies the peak-to-peak cell delay variation (CDV) which is contributed to the entire ATM Interface for rt-VBR… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.40 | mscAtmIfCARtVbrMaxCtd | 0 | 0 | This attribute specifies the maximum cell transfer delay (MaxCTD) which is applied to the entire ATM Interface for rt-VBR traffi… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.50 | mscAtmIfCARtVbrCellLossRatio | 0 | 0 | This attribute specifies the tolerable cell loss ratio (CLR) for rt- VBR traffic except for connections managed by a Vpt CA. The… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.60 | mscAtmIfCARtVbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the rt-VBR servi… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.70 | mscAtmIfCARtVbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the rt-VBR service category. The queue … |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.75 | mscAtmIfCARtVbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the rt… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.76 | mscAtmIfCARtVbrHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVP and SVC rt-VBR connections. It takes a value from 0 (… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.80 | mscAtmIfCARtVbrSvcHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC rt-VBR connections. It takes a value from 0 (highest … |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.81 | mscAtmIfCARtVbrSvcMpHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC rt-VBR point-to-multipoint connections. It takes a va… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.82 | mscAtmIfCARtVbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. For the 1pOC48SmSrAtm card, only the default value is s… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.86 | mscAtmIfCARtVbrTrafficShaping | 0 | 0 | This attribute specifies the default traffic shaping option for connections of the rt-VBR service category. An override to this d… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.87 | mscAtmIfCARtVbrShapeRecoupPolicy | 0 | 0 | This attribute specifies the shaping recoup policy for the rt-VBR service category. This is the policy which is used to recoup s… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.88 | mscAtmIfCARtVbrUnshapedTransmitQueueing | 0 | 0 | This attribute specifies the default queuing option for unshaped connections of the rt-VBR service category. This attribute cont… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.89 | mscAtmIfCARtVbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the rt-VBR service category. This a… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.91 | mscAtmIfCARtVbrForceTagging | 0 | 0 | This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all rt-VBR connections. An override to… |