This attribute specifies the default of whether to force tagging
(CLP=1) of all cells for all rt-VBR connections. An override to this
default may be specified for a provisioned connection under the Vcd
Tm or Vpd Tm component. This attribute is not supported by
4pOC12SmIrAtm and 4pOC12SmLrAtm cards.
When this attribute is set to enabled, CLP is set to 1 for all cells in
the transmit direction. Force tagging is only supported on ATM IP
FPs.
On CQC-based ATM FPs, this attribute must be set to disabled.
When this attribute is set to disabled, CLP is unchanged for all cells
in the transmit direction.
This attribute never applies to any type of Vpt.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the default of whether to force tagging
(CLP=1) of all cells for all rt-VBR connections. An override to this
default may be specified for a provisioned connection under the Vcd
Tm or Vpd Tm component. This attribute is not supported by
4pOC12SmIrAtm and 4pOC12SmLrAtm cards.
When this attribute is set to enabled, CLP is set to 1 for all cells in
the transmit direction. Force tagging is only supported on ATM IP
FPs.
On CQC-based ATM FPs, this attribute must be set to disabled.
When this attribute is set to disabled, CLP is unchanged for all cells
in the transmit direction.
This attribute never applies to any type of Vpt.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCARtVbrForceTagging OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all rt-VBR connections. An override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. This attribute is not supported by 4pOC12SmIrAtm and 4pOC12SmLrAtm cards. When this attribute is set to enabled, CLP is set to 1 for all cells in the transmit direction. Force tagging is only supported on ATM IP FPs. On CQC-based ATM FPs, this attribute must be set to disabled. When this attribute is set to disabled, CLP is unchanged for all cells in the transmit direction. This attribute never applies to any type of Vpt." DEFVAL { disabled } ::= { mscAtmIfCARtVbrProvEntry 91 }
mscAtmIfCARtVbrForceTagging OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all rt-VBR connections. An override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. This attribute is not supported by 4pOC12SmIrAtm and 4pOC12SmLrAtm cards. When this attribute is set to enabled, CLP is set to 1 for all cells in the transmit direction. Force tagging is only supported on ATM IP FPs. On CQC-based ATM FPs, this attribute must be set to disabled. When this attribute is set to disabled, CLP is unchanged for all cells in the transmit direction. This attribute never applies to any type of Vpt." DEFVAL { disabled } ::= { mscAtmIfCARtVbrProvEntry 91 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.10 | mscAtmIfCARtVbrPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the real-time variable bit rate (rt-VBR) service cate… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.20 | mscAtmIfCARtVbrCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the rt-VBR service category. A… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.30 | mscAtmIfCARtVbrCdv | 0 | 0 | This attribute specifies the peak-to-peak cell delay variation (CDV) which is contributed to the entire ATM Interface for rt-VBR… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.40 | mscAtmIfCARtVbrMaxCtd | 0 | 0 | This attribute specifies the maximum cell transfer delay (MaxCTD) which is applied to the entire ATM Interface for rt-VBR traffi… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.50 | mscAtmIfCARtVbrCellLossRatio | 0 | 0 | This attribute specifies the tolerable cell loss ratio (CLR) for rt- VBR traffic except for connections managed by a Vpt CA. The… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.60 | mscAtmIfCARtVbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the rt-VBR servi… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.70 | mscAtmIfCARtVbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the rt-VBR service category. The queue … |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.75 | mscAtmIfCARtVbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the rt… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.76 | mscAtmIfCARtVbrHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVP and SVC rt-VBR connections. It takes a value from 0 (… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.80 | mscAtmIfCARtVbrSvcHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC rt-VBR connections. It takes a value from 0 (highest … |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.81 | mscAtmIfCARtVbrSvcMpHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC rt-VBR point-to-multipoint connections. It takes a va… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.82 | mscAtmIfCARtVbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. For the 1pOC48SmSrAtm card, only the default value is s… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.86 | mscAtmIfCARtVbrTrafficShaping | 0 | 0 | This attribute specifies the default traffic shaping option for connections of the rt-VBR service category. An override to this d… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.87 | mscAtmIfCARtVbrShapeRecoupPolicy | 0 | 0 | This attribute specifies the shaping recoup policy for the rt-VBR service category. This is the policy which is used to recoup s… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.88 | mscAtmIfCARtVbrUnshapedTransmitQueueing | 0 | 0 | This attribute specifies the default queuing option for unshaped connections of the rt-VBR service category. This attribute cont… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.89 | mscAtmIfCARtVbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the rt-VBR service category. This a… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.90 | mscAtmIfCARtVbrWeightPolicy | 0 | 0 | This attribute specifies the policy which is applied when calculating the fairness weight for unshaped connections of the rt-VBR… |