This attribute specifies the default queuing option for unshaped
connections of the rt-VBR service category. This attribute controls
whether common or per-VC queueing is used.
Per-VC queueing means that each connection has its own buffering
and queue limits.
Common queueing means that cells are queued in First In First Out
order on a common queue for this service category. The common
queue has one set of congestion control levels for all cells enqueued
on it.
For 1pOC12SmLrAtm and 1pOC48SmSrAtm cards this attribute
must be set to common or autoConfigure. This attribute cannot be
set to perVc since per-Vc queueing is not available on the
1pOC12SmLrAtm and 1pOC48SmSrAtm cards. The value
autoConfigure is interpreted to mean common queueing.
For ATM IP cards, if traffic shaping for this service category is
disabled, this attribute may take any of the three values. In this case,
the value autoConfigure is interpreted to mean per-VC queueing.
For ATM IP cards, if traffic shaping for this service category is not
disabled, the only permitted values are perVc and autoConfigure.
In this case, the result is that all connections use per-VC queueing.
For CQC-based ATM cards, if the perVcQueueInterfaces attribute
of the Lp Eng Arc Cqc component permits shaping for this
interface, then this attribute may take any of the three values. In this
case, the value autoConfigure is interpreted to mean per-VC
queueing. For 4pOC12SmIrAtm and 4pOC12SmLrAtm cards only
perVc queueing is supported. All other attribute values are ignored.
For CQC-based ATM cards, if the perVcQueueInterfaces attribute
of the Lp Eng Arc Cqc component does not permit shaping for this
interface, then this attribute may take values common or
autoConfigure. In this case, the value autoConfigure is interpreted
to mean common queueing.
If this attribute is set to autoConfigure, an override to this default
may be specified for a provisioned connection under the Vcd Tm or
Vpd Tm component.
The opUnshapedTransmitQueueing attribute of this component
indicates whether the transmit queueing is perVc or common.
This attribute does not apply to basic Vpts, and standard Vpt Vccs.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the default queuing option for unshaped
connections of the rt-VBR service category. This attribute controls
whether common or per-VC queueing is used.
Per-VC queueing means that each connection has its own buffering
and queue limits.
Common queueing means that cells are queued in First In First Out
order on a common queue for this service category. The common
queue has one set of congestion control levels for all cells enqueued
on it.
For 1pOC12SmLrAtm and 1pOC48SmSrAtm cards this attribute
must be set to common or autoConfigure. This attribute cannot be
set to perVc since per-Vc queueing is not available on the
1pOC12SmLrAtm and 1pOC48SmSrAtm cards. The value
autoConfigure is interpreted to mean common queueing.
For ATM IP cards, if traffic shaping for this service category is
disabled, this attribute may take any of the three values. In this case,
the value autoConfigure is interpreted to mean per-VC queueing.
For ATM IP cards, if traffic shaping for this service category is not
disabled, the only permitted values are perVc and autoConfigure.
In this case, the result is that all connections use per-VC queueing.
For CQC-based ATM cards, if the perVcQueueInterfaces attribute
of the Lp Eng Arc Cqc component permits shaping for this
interface, then this attribute may take any of the three values. In this
case, the value autoConfigure is interpreted to mean per-VC
queueing. For 4pOC12SmIrAtm and 4pOC12SmLrAtm cards only
perVc queueing is supported. All other attribute values are ignored.
For CQC-based ATM cards, if the perVcQueueInterfaces attribute
of the Lp Eng Arc Cqc component does not permit shaping for this
interface, then this attribute may take values common or
autoConfigure. In this case, the value autoConfigure is interpreted
to mean common queueing.
If this attribute is set to autoConfigure, an override to this default
may be specified for a provisioned connection under the Vcd Tm or
Vpd Tm component.
The opUnshapedTransmitQueueing attribute of this component
indicates whether the transmit queueing is perVc or common.
This attribute does not apply to basic Vpts, and standard Vpt Vccs.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCARtVbrUnshapedTransmitQueueing OBJECT-TYPE SYNTAX INTEGER { perVc(0), common(1), autoConfigure(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default queuing option for unshaped connections of the rt-VBR service category. This attribute controls whether common or per-VC queueing is used. Per-VC queueing means that each connection has its own buffering and queue limits. Common queueing means that cells are queued in First In First Out order on a common queue for this service category. The common queue has one set of congestion control levels for all cells enqueued on it. For 1pOC12SmLrAtm and 1pOC48SmSrAtm cards this attribute must be set to common or autoConfigure. This attribute cannot be set to perVc since per-Vc queueing is not available on the 1pOC12SmLrAtm and 1pOC48SmSrAtm cards. The value autoConfigure is interpreted to mean common queueing. For ATM IP cards, if traffic shaping for this service category is disabled, this attribute may take any of the three values. In this case, the value autoConfigure is interpreted to mean per-VC queueing. For ATM IP cards, if traffic shaping for this service category is not disabled, the only permitted values are perVc and autoConfigure. In this case, the result is that all connections use per-VC queueing. For CQC-based ATM cards, if the perVcQueueInterfaces attribute of the Lp Eng Arc Cqc component permits shaping for this interface, then this attribute may take any of the three values. In this case, the value autoConfigure is interpreted to mean per-VC queueing. For 4pOC12SmIrAtm and 4pOC12SmLrAtm cards only perVc queueing is supported. All other attribute values are ignored. For CQC-based ATM cards, if the perVcQueueInterfaces attribute of the Lp Eng Arc Cqc component does not permit shaping for this interface, then this attribute may take values common or autoConfigure. In this case, the value autoConfigure is interpreted to mean common queueing. If this attribute is set to autoConfigure, an override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. The opUnshapedTransmitQueueing attribute of this component indicates whether the transmit queueing is perVc or common. This attribute does not apply to basic Vpts, and standard Vpt Vccs." DEFVAL { autoConfigure } ::= { mscAtmIfCARtVbrProvEntry 88 }
mscAtmIfCARtVbrUnshapedTransmitQueueing OBJECT-TYPE SYNTAX INTEGER { perVc(0), common(1), autoConfigure(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default queuing option for unshaped connections of the rt-VBR service category. This attribute controls whether common or per-VC queueing is used. Per-VC queueing means that each connection has its own buffering and queue limits. Common queueing means that cells are queued in First In First Out order on a common queue for this service category. The common queue has one set of congestion control levels for all cells enqueued on it. For 1pOC12SmLrAtm and 1pOC48SmSrAtm cards this attribute must be set to common or autoConfigure. This attribute cannot be set to perVc since per-Vc queueing is not available on the 1pOC12SmLrAtm and 1pOC48SmSrAtm cards. The value autoConfigure is interpreted to mean common queueing. For ATM IP cards, if traffic shaping for this service category is disabled, this attribute may take any of the three values. In this case, the value autoConfigure is interpreted to mean per-VC queueing. For ATM IP cards, if traffic shaping for this service category is not disabled, the only permitted values are perVc and autoConfigure. In this case, the result is that all connections use per-VC queueing. For CQC-based ATM cards, if the perVcQueueInterfaces attribute of the Lp Eng Arc Cqc component permits shaping for this interface, then this attribute may take any of the three values. In this case, the value autoConfigure is interpreted to mean per-VC queueing. For 4pOC12SmIrAtm and 4pOC12SmLrAtm cards only perVc queueing is supported. All other attribute values are ignored. For CQC-based ATM cards, if the perVcQueueInterfaces attribute of the Lp Eng Arc Cqc component does not permit shaping for this interface, then this attribute may take values common or autoConfigure. In this case, the value autoConfigure is interpreted to mean common queueing. If this attribute is set to autoConfigure, an override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. The opUnshapedTransmitQueueing attribute of this component indicates whether the transmit queueing is perVc or common. This attribute does not apply to basic Vpts, and standard Vpt Vccs." DEFVAL { autoConfigure } ::= { mscAtmIfCARtVbrProvEntry 88 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.10 | mscAtmIfCARtVbrPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the real-time variable bit rate (rt-VBR) service cate… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.20 | mscAtmIfCARtVbrCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the rt-VBR service category. A… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.30 | mscAtmIfCARtVbrCdv | 0 | 0 | This attribute specifies the peak-to-peak cell delay variation (CDV) which is contributed to the entire ATM Interface for rt-VBR… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.40 | mscAtmIfCARtVbrMaxCtd | 0 | 0 | This attribute specifies the maximum cell transfer delay (MaxCTD) which is applied to the entire ATM Interface for rt-VBR traffi… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.50 | mscAtmIfCARtVbrCellLossRatio | 0 | 0 | This attribute specifies the tolerable cell loss ratio (CLR) for rt- VBR traffic except for connections managed by a Vpt CA. The… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.60 | mscAtmIfCARtVbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the rt-VBR servi… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.70 | mscAtmIfCARtVbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the rt-VBR service category. The queue … |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.75 | mscAtmIfCARtVbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the rt… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.76 | mscAtmIfCARtVbrHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVP and SVC rt-VBR connections. It takes a value from 0 (… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.80 | mscAtmIfCARtVbrSvcHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC rt-VBR connections. It takes a value from 0 (highest … |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.81 | mscAtmIfCARtVbrSvcMpHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC rt-VBR point-to-multipoint connections. It takes a va… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.82 | mscAtmIfCARtVbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. For the 1pOC48SmSrAtm card, only the default value is s… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.86 | mscAtmIfCARtVbrTrafficShaping | 0 | 0 | This attribute specifies the default traffic shaping option for connections of the rt-VBR service category. An override to this d… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.87 | mscAtmIfCARtVbrShapeRecoupPolicy | 0 | 0 | This attribute specifies the shaping recoup policy for the rt-VBR service category. This is the policy which is used to recoup s… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.89 | mscAtmIfCARtVbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the rt-VBR service category. This a… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.90 | mscAtmIfCARtVbrWeightPolicy | 0 | 0 | This attribute specifies the policy which is applied when calculating the fairness weight for unshaped connections of the rt-VBR… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.91 | mscAtmIfCARtVbrForceTagging | 0 | 0 | This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all rt-VBR connections. An override to… |