This attribute specifies the shaping rate to be used in computing the
tolerable delay for per-VC queues of connections of the rt-VBR
service category. The delay is computed as the txQueueLimit
divided by the value of this attribute.
When the value of this attribute is autoConfigure, an appropriate
default is selected based on the card type. It is set to 3685 for low
speed cards such as DS1, E1, and IMA, and set to 14740 for high
speed cards such as JT2, DS3, E3 and OC3. For 4pOC12SmIrAtm
and 4pOC12SmLrAtm cards, the reference rate is set to 65511 for
DS3 and OC3 channels, and set to 262044 for OC12 channels. For
Apc-based cards the maximum value is 1416905. For all other
cards, the maximum value is 943396.
For the 1pOC12SmLrAtm and 1pOC48SmSrAtm cards, this
attribute does not apply since per-VC queueing is not available.
For Vpts, this attribute does not apply. Regardless of Vpt service
category, standard Vpts always use the AtmIf Ca NrtVbr
perVcQueueLimitReferenceRate value as their default.
VALUES (
0 = autoConfigure
)
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the shaping rate to be used in computing the
tolerable delay for per-VC queues of connections of the rt-VBR
service category. The delay is computed as the txQueueLimit
divided by the value of this attribute.
When the value of this attribute is autoConfigure, an appropriate
default is selected based on the card type. It is set to 3685 for low
speed cards such as DS1, E1, and IMA, and set to 14740 for high
speed cards such as JT2, DS3, E3 and OC3. For 4pOC12SmIrAtm
and 4pOC12SmLrAtm cards, the reference rate is set to 65511 for
DS3 and OC3 channels, and set to 262044 for OC12 channels. For
Apc-based cards the maximum value is 1416905. For all other
cards, the maximum value is 943396.
For the 1pOC12SmLrAtm and 1pOC48SmSrAtm cards, this
attribute does not apply since per-VC queueing is not available.
For Vpts, this attribute does not apply. Regardless of Vpt service
category, standard Vpts always use the AtmIf Ca NrtVbr
perVcQueueLimitReferenceRate value as their default.
VALUES (
0 = autoConfigure
)
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCARtVbrPerVcQueueLimitReferenceRate OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..1416905) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the rt-VBR service category. The delay is computed as the txQueueLimit divided by the value of this attribute. When the value of this attribute is autoConfigure, an appropriate default is selected based on the card type. It is set to 3685 for low speed cards such as DS1, E1, and IMA, and set to 14740 for high speed cards such as JT2, DS3, E3 and OC3. For 4pOC12SmIrAtm and 4pOC12SmLrAtm cards, the reference rate is set to 65511 for DS3 and OC3 channels, and set to 262044 for OC12 channels. For Apc-based cards the maximum value is 1416905. For all other cards, the maximum value is 943396. For the 1pOC12SmLrAtm and 1pOC48SmSrAtm cards, this attribute does not apply since per-VC queueing is not available. For Vpts, this attribute does not apply. Regardless of Vpt service category, standard Vpts always use the AtmIf Ca NrtVbr perVcQueueLimitReferenceRate value as their default. VALUES ( 0 = autoConfigure )" DEFVAL { 0 } ::= { mscAtmIfCARtVbrProvEntry 75 }
mscAtmIfCARtVbrPerVcQueueLimitReferenceRate OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..1416905) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the rt-VBR service category. The delay is computed as the txQueueLimit divided by the value of this attribute. When the value of this attribute is autoConfigure, an appropriate default is selected based on the card type. It is set to 3685 for low speed cards such as DS1, E1, and IMA, and set to 14740 for high speed cards such as JT2, DS3, E3 and OC3. For 4pOC12SmIrAtm and 4pOC12SmLrAtm cards, the reference rate is set to 65511 for DS3 and OC3 channels, and set to 262044 for OC12 channels. For Apc-based cards the maximum value is 1416905. For all other cards, the maximum value is 943396. For the 1pOC12SmLrAtm and 1pOC48SmSrAtm cards, this attribute does not apply since per-VC queueing is not available. For Vpts, this attribute does not apply. Regardless of Vpt service category, standard Vpts always use the AtmIf Ca NrtVbr perVcQueueLimitReferenceRate value as their default. VALUES ( 0 = autoConfigure )" DEFVAL { 0 } ::= { mscAtmIfCARtVbrProvEntry 75 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.10 | mscAtmIfCARtVbrPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the real-time variable bit rate (rt-VBR) service cate… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.20 | mscAtmIfCARtVbrCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the rt-VBR service category. A… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.30 | mscAtmIfCARtVbrCdv | 0 | 0 | This attribute specifies the peak-to-peak cell delay variation (CDV) which is contributed to the entire ATM Interface for rt-VBR… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.40 | mscAtmIfCARtVbrMaxCtd | 0 | 0 | This attribute specifies the maximum cell transfer delay (MaxCTD) which is applied to the entire ATM Interface for rt-VBR traffi… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.50 | mscAtmIfCARtVbrCellLossRatio | 0 | 0 | This attribute specifies the tolerable cell loss ratio (CLR) for rt- VBR traffic except for connections managed by a Vpt CA. The… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.60 | mscAtmIfCARtVbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the rt-VBR servi… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.70 | mscAtmIfCARtVbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the rt-VBR service category. The queue … |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.76 | mscAtmIfCARtVbrHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVP and SVC rt-VBR connections. It takes a value from 0 (… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.80 | mscAtmIfCARtVbrSvcHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC rt-VBR connections. It takes a value from 0 (highest … |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.81 | mscAtmIfCARtVbrSvcMpHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC rt-VBR point-to-multipoint connections. It takes a va… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.82 | mscAtmIfCARtVbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. For the 1pOC48SmSrAtm card, only the default value is s… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.86 | mscAtmIfCARtVbrTrafficShaping | 0 | 0 | This attribute specifies the default traffic shaping option for connections of the rt-VBR service category. An override to this d… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.87 | mscAtmIfCARtVbrShapeRecoupPolicy | 0 | 0 | This attribute specifies the shaping recoup policy for the rt-VBR service category. This is the policy which is used to recoup s… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.88 | mscAtmIfCARtVbrUnshapedTransmitQueueing | 0 | 0 | This attribute specifies the default queuing option for unshaped connections of the rt-VBR service category. This attribute cont… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.89 | mscAtmIfCARtVbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the rt-VBR service category. This a… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.90 | mscAtmIfCARtVbrWeightPolicy | 0 | 0 | This attribute specifies the policy which is applied when calculating the fairness weight for unshaped connections of the rt-VBR… |
| 1.3.6.1.4.1.562.36.2.1.114.3.3.100.1.91 | mscAtmIfCARtVbrForceTagging | 0 | 0 | This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all rt-VBR connections. An override to… |