This attribute specifies an override to the default transmit queue
limit for this connection. An value other than sameAsCa may be
specified only for ATM IP and 1pOC48SmSrAtm cards. This
attribute is not applicable for basic Vpts.
A value of sameAsCa means to use the default common or per-VC
transmit queue limit as defined by the CA service category for this
connection.
A value from 5 to 63,488 indicates that a specific transmit queue
limit is requested which differs from the default which is defined
under the CA component for this service category. A specific value
is ignored for connections where common queuing is specified for
the service category.
For the 1pOC48SmSrAtm card, this attribute is used to set the per
VC utilization limit.
The actual transmit queue limit for a connection is visible in the Vcc
Tm, Vpc Tm or Vpt txQueueThresholds attribute.
VALUES (
0 = sameAsCa
)
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies an override to the default transmit queue
limit for this connection. An value other than sameAsCa may be
specified only for ATM IP and 1pOC48SmSrAtm cards. This
attribute is not applicable for basic Vpts.
A value of sameAsCa means to use the default common or per-VC
transmit queue limit as defined by the CA service category for this
connection.
A value from 5 to 63,488 indicates that a specific transmit queue
limit is requested which differs from the default which is defined
under the CA component for this service category. A specific value
is ignored for connections where common queuing is specified for
the service category.
For the 1pOC48SmSrAtm card, this attribute is used to set the per
VC utilization limit.
The actual transmit queue limit for a connection is visible in the Vcc
Tm, Vpc Tm or Vpt txQueueThresholds attribute.
VALUES (
0 = sameAsCa
)
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfVccVcdTmTxQueueLimit OBJECT-TYPE SYNTAX Unsigned32 (0 | 5..512000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies an override to the default transmit queue limit for this connection. An value other than sameAsCa may be specified only for ATM IP and 1pOC48SmSrAtm cards. This attribute is not applicable for basic Vpts. A value of sameAsCa means to use the default common or per-VC transmit queue limit as defined by the CA service category for this connection. A value from 5 to 63,488 indicates that a specific transmit queue limit is requested which differs from the default which is defined under the CA component for this service category. A specific value is ignored for connections where common queuing is specified for the service category. For the 1pOC48SmSrAtm card, this attribute is used to set the per VC utilization limit. The actual transmit queue limit for a connection is visible in the Vcc Tm, Vpc Tm or Vpt txQueueThresholds attribute. VALUES ( 0 = sameAsCa )" DEFVAL { 0 } ::= { mscAtmIfVccVcdTmProvEntry 22 }
mscAtmIfVccVcdTmTxQueueLimit OBJECT-TYPE SYNTAX Unsigned32 (0 | 5..512000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies an override to the default transmit queue limit for this connection. An value other than sameAsCa may be specified only for ATM IP and 1pOC48SmSrAtm cards. This attribute is not applicable for basic Vpts. A value of sameAsCa means to use the default common or per-VC transmit queue limit as defined by the CA service category for this connection. A value from 5 to 63,488 indicates that a specific transmit queue limit is requested which differs from the default which is defined under the CA component for this service category. A specific value is ignored for connections where common queuing is specified for the service category. For the 1pOC48SmSrAtm card, this attribute is used to set the per VC utilization limit. The actual transmit queue limit for a connection is visible in the Vcc Tm, Vpc Tm or Vpt txQueueThresholds attribute. VALUES ( 0 = sameAsCa )" DEFVAL { 0 } ::= { mscAtmIfVccVcdTmProvEntry 22 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.10 | mscAtmIfVccVcdTmTxTrafficDescType | 0 | 0 | This attribute specifies the type of traffic management which is applied to the transmit direction of this connection as defined… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.21 | mscAtmIfVccVcdTmFwdQosClass | 0 | 0 | This attribute specifies the quality of service for the forward direction for this connection. This attribute is only used for S… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.25 | mscAtmIfVccVcdTmHoldingPriority | 0 | 0 | This attribute specifies the holding priority of this connection. In a situation where the link bandwidth fluctuates, such as ov… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.30 | mscAtmIfVccVcdTmRxTrafficDescType | 0 | 0 | This attribute specifies the type of traffic management which is applied to the receive direction of this connection as defined … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.41 | mscAtmIfVccVcdTmBwdQosClass | 0 | 0 | This attribute specifies the quality of service for the backward direction for this connection. This attribute is only used for … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.42 | mscAtmIfVccVcdTmAtmServiceCategory | 0 | 0 | This attribute specifies the ATM service category for both directions of the connection. The value derivedFromBBC may only be us… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.50 | mscAtmIfVccVcdTmTrafficShaping | 0 | 0 | This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. This attri… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.60 | mscAtmIfVccVcdTmUnshapedTransmitQueueing | 0 | 0 | This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this con… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.61 | mscAtmIfVccVcdTmWeight | 0 | 0 | This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connection… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.62 | mscAtmIfVccVcdTmForceTagging | 0 | 0 | This attribute specifies whether force tagging is enforced for this connection for cells in the transmit direction. On CQC-based… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.70 | mscAtmIfVccVcdTmUsageParameterControl | 0 | 0 | This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface.… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.71 | mscAtmIfVccVcdTmBearerClassBbc | 0 | 0 | This attribute specifies the bearer capability. This attribute is only used for SPVC and SPVP connections. It is one of the Broa… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.72 | mscAtmIfVccVcdTmTransferCapabilityBbc | 0 | 0 | This attribute specifies the transfer capability for this connection. Uni 3.0/3.1 traffic type and end-to-end timing parameters … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.74 | mscAtmIfVccVcdTmClippingBbc | 0 | 0 | This attribute specifies the value for the clipping susceptibility parameter in the BBC Information Element. This attribute is o… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.75 | mscAtmIfVccVcdTmBestEffort | 0 | 0 | This attribute specifies the value of the best effort parameter in the ATM Traffic Descriptor Information Element. This attribut… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.76 | mscAtmIfVccVcdTmTxPacketWiseDiscard | 0 | 0 | This attribute specifies whether packet-wise discard functions are to be enabled or disabled in the transmit data direction for … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.78 | mscAtmIfVccVcdTmRxPacketWiseDiscard | 0 | 0 | This attribute specifies whether packet-wise discard functions are to be enabled or disabled in the receive data direction for t… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.90 | mscAtmIfVccVcdTmAbrConnectionType | 0 | 0 | This attribute specifies the type of ABR behavior which is to be enforced at this connection. This attribute is only applicable … |