This attribute specifies whether packet-wise discard functions are to
be enabled or disabled in the receive data direction for this
connection. Packet-wise discard functions should only be requested
if this connection is transferring AAL5 frame traffic. This attribute
is not applicable for Vpts.
Packet-wise functions increase the 'goodput' of the link. The
receive packet-wise function is Partial Packet Discard (PPD).
PPD allows the connection to discard the remainder of a cell-
forwarded AAL5 frame if one cell of this frame has been discarded,
for example due to UPC. All cells are discarded up to but not
including the EOM cell. The PPD function increases the 'goodput'
of the link, since cells which are only going to be discarded at the
AAL5 reassembly point are not transmitted.
PPD is available at all VCC connection points where UPC may be
activated. PPD is not applicable for Vpcs.
On CQC-based ATM FPs, packet-wise discards should only be
enabled for connections carrying AAL5 segmentation traffic.
Setting the value to enabled for any other traffic type may result in
traffic being discarded.
On CQC-based ATM cards, at a permanent VCC connection
endpoint, this attribute is not applicable and is ignored. If AAL5
segmentation and reassembly has been requested, PPD and Early
Packet Discard (EPD) are automatically enabled.
On ATM IP cards, this attribute may safely be set to enabled for any
connection (Vcc or Vpc) since they have the ability to automatically
detect AAL5-segmented traffic on a connection, and only enables
packet-wise discards if AAL5-segmented traffic is detected.
When this attribute is set to enabled, packet-wise discard functions
are applied to receive traffic at this connection point. When this
attribute is set to disabled, packet-wise discard functions are not
applied to receive traffic at this connection point.
At a SPVC origin on a PNNI interface, a value of enabled specifies
that frame discard is requested in the forward direction. When this
attribute is set to disabled, forward frame discard is not requested in
the SPVC call setup.
The receive packet-wise discard functions that are active are visible
in the Vcc/Vpc Tm rxPacketWiseDiscard operational attribute.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies whether packet-wise discard functions are to
be enabled or disabled in the receive data direction for this
connection. Packet-wise discard functions should only be requested
if this connection is transferring AAL5 frame traffic. This attribute
is not applicable for Vpts.
Packet-wise functions increase the 'goodput' of the link. The
receive packet-wise function is Partial Packet Discard (PPD).
PPD allows the connection to discard the remainder of a cell-
forwarded AAL5 frame if one cell of this frame has been discarded,
for example due to UPC. All cells are discarded up to but not
including the EOM cell. The PPD function increases the 'goodput'
of the link, since cells which are only going to be discarded at the
AAL5 reassembly point are not transmitted.
PPD is available at all VCC connection points where UPC may be
activated. PPD is not applicable for Vpcs.
On CQC-based ATM FPs, packet-wise discards should only be
enabled for connections carrying AAL5 segmentation traffic.
Setting the value to enabled for any other traffic type may result in
traffic being discarded.
On CQC-based ATM cards, at a permanent VCC connection
endpoint, this attribute is not applicable and is ignored. If AAL5
segmentation and reassembly has been requested, PPD and Early
Packet Discard (EPD) are automatically enabled.
On ATM IP cards, this attribute may safely be set to enabled for any
connection (Vcc or Vpc) since they have the ability to automatically
detect AAL5-segmented traffic on a connection, and only enables
packet-wise discards if AAL5-segmented traffic is detected.
When this attribute is set to enabled, packet-wise discard functions
are applied to receive traffic at this connection point. When this
attribute is set to disabled, packet-wise discard functions are not
applied to receive traffic at this connection point.
At a SPVC origin on a PNNI interface, a value of enabled specifies
that frame discard is requested in the forward direction. When this
attribute is set to disabled, forward frame discard is not requested in
the SPVC call setup.
The receive packet-wise discard functions that are active are visible
in the Vcc/Vpc Tm rxPacketWiseDiscard operational attribute.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfVccVcdTmRxPacketWiseDiscard OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether packet-wise discard functions are to be enabled or disabled in the receive data direction for this connection. Packet-wise discard functions should only be requested if this connection is transferring AAL5 frame traffic. This attribute is not applicable for Vpts. Packet-wise functions increase the 'goodput' of the link. The receive packet-wise function is Partial Packet Discard (PPD). PPD allows the connection to discard the remainder of a cell- forwarded AAL5 frame if one cell of this frame has been discarded, for example due to UPC. All cells are discarded up to but not including the EOM cell. The PPD function increases the 'goodput' of the link, since cells which are only going to be discarded at the AAL5 reassembly point are not transmitted. PPD is available at all VCC connection points where UPC may be activated. PPD is not applicable for Vpcs. On CQC-based ATM FPs, packet-wise discards should only be enabled for connections carrying AAL5 segmentation traffic. Setting the value to enabled for any other traffic type may result in traffic being discarded. On CQC-based ATM cards, at a permanent VCC connection endpoint, this attribute is not applicable and is ignored. If AAL5 segmentation and reassembly has been requested, PPD and Early Packet Discard (EPD) are automatically enabled. On ATM IP cards, this attribute may safely be set to enabled for any connection (Vcc or Vpc) since they have the ability to automatically detect AAL5-segmented traffic on a connection, and only enables packet-wise discards if AAL5-segmented traffic is detected. When this attribute is set to enabled, packet-wise discard functions are applied to receive traffic at this connection point. When this attribute is set to disabled, packet-wise discard functions are not applied to receive traffic at this connection point. At a SPVC origin on a PNNI interface, a value of enabled specifies that frame discard is requested in the forward direction. When this attribute is set to disabled, forward frame discard is not requested in the SPVC call setup. The receive packet-wise discard functions that are active are visible in the Vcc/Vpc Tm rxPacketWiseDiscard operational attribute." DEFVAL { disabled } ::= { mscAtmIfVccVcdTmProvEntry 78 }
mscAtmIfVccVcdTmRxPacketWiseDiscard OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether packet-wise discard functions are to be enabled or disabled in the receive data direction for this connection. Packet-wise discard functions should only be requested if this connection is transferring AAL5 frame traffic. This attribute is not applicable for Vpts. Packet-wise functions increase the 'goodput' of the link. The receive packet-wise function is Partial Packet Discard (PPD). PPD allows the connection to discard the remainder of a cell- forwarded AAL5 frame if one cell of this frame has been discarded, for example due to UPC. All cells are discarded up to but not including the EOM cell. The PPD function increases the 'goodput' of the link, since cells which are only going to be discarded at the AAL5 reassembly point are not transmitted. PPD is available at all VCC connection points where UPC may be activated. PPD is not applicable for Vpcs. On CQC-based ATM FPs, packet-wise discards should only be enabled for connections carrying AAL5 segmentation traffic. Setting the value to enabled for any other traffic type may result in traffic being discarded. On CQC-based ATM cards, at a permanent VCC connection endpoint, this attribute is not applicable and is ignored. If AAL5 segmentation and reassembly has been requested, PPD and Early Packet Discard (EPD) are automatically enabled. On ATM IP cards, this attribute may safely be set to enabled for any connection (Vcc or Vpc) since they have the ability to automatically detect AAL5-segmented traffic on a connection, and only enables packet-wise discards if AAL5-segmented traffic is detected. When this attribute is set to enabled, packet-wise discard functions are applied to receive traffic at this connection point. When this attribute is set to disabled, packet-wise discard functions are not applied to receive traffic at this connection point. At a SPVC origin on a PNNI interface, a value of enabled specifies that frame discard is requested in the forward direction. When this attribute is set to disabled, forward frame discard is not requested in the SPVC call setup. The receive packet-wise discard functions that are active are visible in the Vcc/Vpc Tm rxPacketWiseDiscard operational attribute." DEFVAL { disabled } ::= { mscAtmIfVccVcdTmProvEntry 78 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.10 | mscAtmIfVccVcdTmTxTrafficDescType | 0 | 0 | This attribute specifies the type of traffic management which is applied to the transmit direction of this connection as defined… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.21 | mscAtmIfVccVcdTmFwdQosClass | 0 | 0 | This attribute specifies the quality of service for the forward direction for this connection. This attribute is only used for S… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.22 | mscAtmIfVccVcdTmTxQueueLimit | 0 | 0 | This attribute specifies an override to the default transmit queue limit for this connection. An value other than sameAsCa may b… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.25 | mscAtmIfVccVcdTmHoldingPriority | 0 | 0 | This attribute specifies the holding priority of this connection. In a situation where the link bandwidth fluctuates, such as ov… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.30 | mscAtmIfVccVcdTmRxTrafficDescType | 0 | 0 | This attribute specifies the type of traffic management which is applied to the receive direction of this connection as defined … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.41 | mscAtmIfVccVcdTmBwdQosClass | 0 | 0 | This attribute specifies the quality of service for the backward direction for this connection. This attribute is only used for … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.42 | mscAtmIfVccVcdTmAtmServiceCategory | 0 | 0 | This attribute specifies the ATM service category for both directions of the connection. The value derivedFromBBC may only be us… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.50 | mscAtmIfVccVcdTmTrafficShaping | 0 | 0 | This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. This attri… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.60 | mscAtmIfVccVcdTmUnshapedTransmitQueueing | 0 | 0 | This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this con… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.61 | mscAtmIfVccVcdTmWeight | 0 | 0 | This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connection… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.62 | mscAtmIfVccVcdTmForceTagging | 0 | 0 | This attribute specifies whether force tagging is enforced for this connection for cells in the transmit direction. On CQC-based… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.70 | mscAtmIfVccVcdTmUsageParameterControl | 0 | 0 | This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface.… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.71 | mscAtmIfVccVcdTmBearerClassBbc | 0 | 0 | This attribute specifies the bearer capability. This attribute is only used for SPVC and SPVP connections. It is one of the Broa… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.72 | mscAtmIfVccVcdTmTransferCapabilityBbc | 0 | 0 | This attribute specifies the transfer capability for this connection. Uni 3.0/3.1 traffic type and end-to-end timing parameters … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.74 | mscAtmIfVccVcdTmClippingBbc | 0 | 0 | This attribute specifies the value for the clipping susceptibility parameter in the BBC Information Element. This attribute is o… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.75 | mscAtmIfVccVcdTmBestEffort | 0 | 0 | This attribute specifies the value of the best effort parameter in the ATM Traffic Descriptor Information Element. This attribut… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.76 | mscAtmIfVccVcdTmTxPacketWiseDiscard | 0 | 0 | This attribute specifies whether packet-wise discard functions are to be enabled or disabled in the transmit data direction for … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.90 | mscAtmIfVccVcdTmAbrConnectionType | 0 | 0 | This attribute specifies the type of ABR behavior which is to be enforced at this connection. This attribute is only applicable … |