This attribute specifies the bearer capability. This attribute is only
used for SPVC and SPVP connections. It is one of the Broadband
Bearer Capability (BBC) attributes. The purpose of the BBC
information element is to indicate a requested broadband
connection-oriented bearer service to be provided by the network.
The value derivedFromServiceCategory specifies that the actual
value which is used for this connection is derived from the value of
the atmServiceCategory. Either, this attribute must be set to
derivedFromServiceCategory, or the atmServiceCategory attribute
must be set to derivedFromBBC, but not both.
Class a service is a connection-oriented, constant bit rate ATM
transport service. Class a service has end to end timing
requirements and may require stringent cell loss, cell delay and cell
delay variation performance.When a is set, the user is requesting
more than an ATM only service. The network may look at the AAL
to provide interworking based upon its contents.
Class c service is a connection-oriented, variable bit rate ATM
transport service. Class c service has no end-to-end timing
requirements. When c is set, the user is requesting more than an
ATM only service. The network interworking function may look at
the AAL and provide service based on it.
Class x service is a connection-oriented ATM transport service
where the AAL, trafficType (vbr or cbr) and timing requirements
are user defined (that is, transparent to the network).When x is set
the user is requesting an ATM only service from the network. In this
case, the network shall not process any higher layer protocol.
Class vp service is used to specify a transparent VP service. When
the value of this attribute is vp, the user is requesting an ATM only
service from the network. In this case, the network shall not process
any higher layer protocol. This service differs from class x service
in that with the class vp service both the VCI field (except or VCI
values 0, 3, 4, and 6 through 15) and Payload Type field are
transported transparently by the network. This attribute value is
only applicable to SPVP connections.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the bearer capability. This attribute is only
used for SPVC and SPVP connections. It is one of the Broadband
Bearer Capability (BBC) attributes. The purpose of the BBC
information element is to indicate a requested broadband
connection-oriented bearer service to be provided by the network.
The value derivedFromServiceCategory specifies that the actual
value which is used for this connection is derived from the value of
the atmServiceCategory. Either, this attribute must be set to
derivedFromServiceCategory, or the atmServiceCategory attribute
must be set to derivedFromBBC, but not both.
Class a service is a connection-oriented, constant bit rate ATM
transport service. Class a service has end to end timing
requirements and may require stringent cell loss, cell delay and cell
delay variation performance.When a is set, the user is requesting
more than an ATM only service. The network may look at the AAL
to provide interworking based upon its contents.
Class c service is a connection-oriented, variable bit rate ATM
transport service. Class c service has no end-to-end timing
requirements. When c is set, the user is requesting more than an
ATM only service. The network interworking function may look at
the AAL and provide service based on it.
Class x service is a connection-oriented ATM transport service
where the AAL, trafficType (vbr or cbr) and timing requirements
are user defined (that is, transparent to the network).When x is set
the user is requesting an ATM only service from the network. In this
case, the network shall not process any higher layer protocol.
Class vp service is used to specify a transparent VP service. When
the value of this attribute is vp, the user is requesting an ATM only
service from the network. In this case, the network shall not process
any higher layer protocol. This service differs from class x service
in that with the class vp service both the VCI field (except or VCI
values 0, 3, 4, and 6 through 15) and Payload Type field are
transported transparently by the network. This attribute value is
only applicable to SPVP connections.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfVccVcdTmBearerClassBbc OBJECT-TYPE SYNTAX INTEGER { a(1), c(3), x(16), vp(24), derivedFromServiceCategory(31) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the bearer capability. This attribute is only used for SPVC and SPVP connections. It is one of the Broadband Bearer Capability (BBC) attributes. The purpose of the BBC information element is to indicate a requested broadband connection-oriented bearer service to be provided by the network. The value derivedFromServiceCategory specifies that the actual value which is used for this connection is derived from the value of the atmServiceCategory. Either, this attribute must be set to derivedFromServiceCategory, or the atmServiceCategory attribute must be set to derivedFromBBC, but not both. Class a service is a connection-oriented, constant bit rate ATM transport service. Class a service has end to end timing requirements and may require stringent cell loss, cell delay and cell delay variation performance.When a is set, the user is requesting more than an ATM only service. The network may look at the AAL to provide interworking based upon its contents. Class c service is a connection-oriented, variable bit rate ATM transport service. Class c service has no end-to-end timing requirements. When c is set, the user is requesting more than an ATM only service. The network interworking function may look at the AAL and provide service based on it. Class x service is a connection-oriented ATM transport service where the AAL, trafficType (vbr or cbr) and timing requirements are user defined (that is, transparent to the network).When x is set the user is requesting an ATM only service from the network. In this case, the network shall not process any higher layer protocol. Class vp service is used to specify a transparent VP service. When the value of this attribute is vp, the user is requesting an ATM only service from the network. In this case, the network shall not process any higher layer protocol. This service differs from class x service in that with the class vp service both the VCI field (except or VCI values 0, 3, 4, and 6 through 15) and Payload Type field are transported transparently by the network. This attribute value is only applicable to SPVP connections." DEFVAL { derivedFromServiceCategory } ::= { mscAtmIfVccVcdTmProvEntry 71 }
mscAtmIfVccVcdTmBearerClassBbc OBJECT-TYPE SYNTAX INTEGER { a(1), c(3), x(16), vp(24), derivedFromServiceCategory(31) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the bearer capability. This attribute is only used for SPVC and SPVP connections. It is one of the Broadband Bearer Capability (BBC) attributes. The purpose of the BBC information element is to indicate a requested broadband connection-oriented bearer service to be provided by the network. The value derivedFromServiceCategory specifies that the actual value which is used for this connection is derived from the value of the atmServiceCategory. Either, this attribute must be set to derivedFromServiceCategory, or the atmServiceCategory attribute must be set to derivedFromBBC, but not both. Class a service is a connection-oriented, constant bit rate ATM transport service. Class a service has end to end timing requirements and may require stringent cell loss, cell delay and cell delay variation performance.When a is set, the user is requesting more than an ATM only service. The network may look at the AAL to provide interworking based upon its contents. Class c service is a connection-oriented, variable bit rate ATM transport service. Class c service has no end-to-end timing requirements. When c is set, the user is requesting more than an ATM only service. The network interworking function may look at the AAL and provide service based on it. Class x service is a connection-oriented ATM transport service where the AAL, trafficType (vbr or cbr) and timing requirements are user defined (that is, transparent to the network).When x is set the user is requesting an ATM only service from the network. In this case, the network shall not process any higher layer protocol. Class vp service is used to specify a transparent VP service. When the value of this attribute is vp, the user is requesting an ATM only service from the network. In this case, the network shall not process any higher layer protocol. This service differs from class x service in that with the class vp service both the VCI field (except or VCI values 0, 3, 4, and 6 through 15) and Payload Type field are transported transparently by the network. This attribute value is only applicable to SPVP connections." DEFVAL { derivedFromServiceCategory } ::= { mscAtmIfVccVcdTmProvEntry 71 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.10 | mscAtmIfVccVcdTmTxTrafficDescType | 0 | 0 | This attribute specifies the type of traffic management which is applied to the transmit direction of this connection as defined… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.21 | mscAtmIfVccVcdTmFwdQosClass | 0 | 0 | This attribute specifies the quality of service for the forward direction for this connection. This attribute is only used for S… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.22 | mscAtmIfVccVcdTmTxQueueLimit | 0 | 0 | This attribute specifies an override to the default transmit queue limit for this connection. An value other than sameAsCa may b… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.25 | mscAtmIfVccVcdTmHoldingPriority | 0 | 0 | This attribute specifies the holding priority of this connection. In a situation where the link bandwidth fluctuates, such as ov… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.30 | mscAtmIfVccVcdTmRxTrafficDescType | 0 | 0 | This attribute specifies the type of traffic management which is applied to the receive direction of this connection as defined … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.41 | mscAtmIfVccVcdTmBwdQosClass | 0 | 0 | This attribute specifies the quality of service for the backward direction for this connection. This attribute is only used for … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.42 | mscAtmIfVccVcdTmAtmServiceCategory | 0 | 0 | This attribute specifies the ATM service category for both directions of the connection. The value derivedFromBBC may only be us… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.50 | mscAtmIfVccVcdTmTrafficShaping | 0 | 0 | This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. This attri… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.60 | mscAtmIfVccVcdTmUnshapedTransmitQueueing | 0 | 0 | This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this con… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.61 | mscAtmIfVccVcdTmWeight | 0 | 0 | This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connection… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.62 | mscAtmIfVccVcdTmForceTagging | 0 | 0 | This attribute specifies whether force tagging is enforced for this connection for cells in the transmit direction. On CQC-based… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.70 | mscAtmIfVccVcdTmUsageParameterControl | 0 | 0 | This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface.… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.72 | mscAtmIfVccVcdTmTransferCapabilityBbc | 0 | 0 | This attribute specifies the transfer capability for this connection. Uni 3.0/3.1 traffic type and end-to-end timing parameters … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.74 | mscAtmIfVccVcdTmClippingBbc | 0 | 0 | This attribute specifies the value for the clipping susceptibility parameter in the BBC Information Element. This attribute is o… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.75 | mscAtmIfVccVcdTmBestEffort | 0 | 0 | This attribute specifies the value of the best effort parameter in the ATM Traffic Descriptor Information Element. This attribut… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.76 | mscAtmIfVccVcdTmTxPacketWiseDiscard | 0 | 0 | This attribute specifies whether packet-wise discard functions are to be enabled or disabled in the transmit data direction for … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.78 | mscAtmIfVccVcdTmRxPacketWiseDiscard | 0 | 0 | This attribute specifies whether packet-wise discard functions are to be enabled or disabled in the receive data direction for t… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.90 | mscAtmIfVccVcdTmAbrConnectionType | 0 | 0 | This attribute specifies the type of ABR behavior which is to be enforced at this connection. This attribute is only applicable … |