This attribute specifies the ATM service category for both directions
of the connection.
The value derivedFromBBC may only be used if the SrcPvc
component is provisioned under this Vcc. Otherwise a specific
ATM service category must be specified.
If this attribute is set to derivedFromBBC, the Broadband Bearer
Capability (BBC) and bestEffort attributes are used to determine the
atmServiceCategory of this connection.
If this attribute is set to other than derivedFromBBC, the value of
this attribute is used to override the provisioned BBC Information
Element parameters. In those cases, the BBC attributes are not used.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by Cell Transfer Delay are
assumed to be of significantly reduced value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The availableBitRate service is an ATM layer service category for
which the limiting ATM layer transfer characteristics provided by
the network may change subsequent to connection establishment.
ABR service has a flow control mechanism which supports several
types of feedback to control the source rate in response to changing
ATM layer transfer characteristics. ABR service is not intended to
support real-time applications.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the ATM service category for both directions
of the connection.
The value derivedFromBBC may only be used if the SrcPvc
component is provisioned under this Vcc. Otherwise a specific
ATM service category must be specified.
If this attribute is set to derivedFromBBC, the Broadband Bearer
Capability (BBC) and bestEffort attributes are used to determine the
atmServiceCategory of this connection.
If this attribute is set to other than derivedFromBBC, the value of
this attribute is used to override the provisioned BBC Information
Element parameters. In those cases, the BBC attributes are not used.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by Cell Transfer Delay are
assumed to be of significantly reduced value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The availableBitRate service is an ATM layer service category for
which the limiting ATM layer transfer characteristics provided by
the network may change subsequent to connection establishment.
ABR service has a flow control mechanism which supports several
types of feedback to control the source rate in response to changing
ATM layer transfer characteristics. ABR service is not intended to
support real-time applications.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfVccVcdTmAtmServiceCategory OBJECT-TYPE SYNTAX INTEGER { unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3), availableBitRate(4), derivedFromBBC(15) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the ATM service category for both directions of the connection. The value derivedFromBBC may only be used if the SrcPvc component is provisioned under this Vcc. Otherwise a specific ATM service category must be specified. If this attribute is set to derivedFromBBC, the Broadband Bearer Capability (BBC) and bestEffort attributes are used to determine the atmServiceCategory of this connection. If this attribute is set to other than derivedFromBBC, the value of this attribute is used to override the provisioned BBC Information Element parameters. In those cases, the BBC attributes are not used. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by Cell Transfer Delay are assumed to be of significantly reduced value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The availableBitRate service is an ATM layer service category for which the limiting ATM layer transfer characteristics provided by the network may change subsequent to connection establishment. ABR service has a flow control mechanism which supports several types of feedback to control the source rate in response to changing ATM layer transfer characteristics. ABR service is not intended to support real-time applications. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection." DEFVAL { unspecifiedBitRate } ::= { mscAtmIfVccVcdTmProvEntry 42 }
mscAtmIfVccVcdTmAtmServiceCategory OBJECT-TYPE SYNTAX INTEGER { unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3), availableBitRate(4), derivedFromBBC(15) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the ATM service category for both directions of the connection. The value derivedFromBBC may only be used if the SrcPvc component is provisioned under this Vcc. Otherwise a specific ATM service category must be specified. If this attribute is set to derivedFromBBC, the Broadband Bearer Capability (BBC) and bestEffort attributes are used to determine the atmServiceCategory of this connection. If this attribute is set to other than derivedFromBBC, the value of this attribute is used to override the provisioned BBC Information Element parameters. In those cases, the BBC attributes are not used. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by Cell Transfer Delay are assumed to be of significantly reduced value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The availableBitRate service is an ATM layer service category for which the limiting ATM layer transfer characteristics provided by the network may change subsequent to connection establishment. ABR service has a flow control mechanism which supports several types of feedback to control the source rate in response to changing ATM layer transfer characteristics. ABR service is not intended to support real-time applications. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection." DEFVAL { unspecifiedBitRate } ::= { mscAtmIfVccVcdTmProvEntry 42 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.10 | mscAtmIfVccVcdTmTxTrafficDescType | 0 | 0 | This attribute specifies the type of traffic management which is applied to the transmit direction of this connection as defined… |
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.21 | mscAtmIfVccVcdTmFwdQosClass | 0 | 0 | This attribute specifies the quality of service for the forward direction for this connection. This attribute is only used for S… |
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.22 | mscAtmIfVccVcdTmTxQueueLimit | 0 | 0 | This attribute specifies an override to the default transmit queue limit for this connection. An value other than sameAsCa may b… |
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.25 | mscAtmIfVccVcdTmHoldingPriority | 0 | 0 | This attribute specifies the holding priority of this connection. In a situation where the link bandwidth fluctuates, such as ov… |
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.30 | mscAtmIfVccVcdTmRxTrafficDescType | 0 | 0 | This attribute specifies the type of traffic management which is applied to the receive direction of this connection as defined … |
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.41 | mscAtmIfVccVcdTmBwdQosClass | 0 | 0 | This attribute specifies the quality of service for the backward direction for this connection. This attribute is only used for … |
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.50 | mscAtmIfVccVcdTmTrafficShaping | 0 | 0 | This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. This attri… |
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.60 | mscAtmIfVccVcdTmUnshapedTransmitQueueing | 0 | 0 | This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this con… |
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.61 | mscAtmIfVccVcdTmWeight | 0 | 0 | This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connection… |
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.62 | mscAtmIfVccVcdTmForceTagging | 0 | 0 | This attribute specifies whether force tagging is enforced for this connection for cells in the transmit direction. On CQC-based… |
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.70 | mscAtmIfVccVcdTmUsageParameterControl | 0 | 0 | This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface.… |
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.71 | mscAtmIfVccVcdTmBearerClassBbc | 0 | 0 | This attribute specifies the bearer capability. This attribute is only used for SPVC and SPVP connections. It is one of the Broa… |
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.72 | mscAtmIfVccVcdTmTransferCapabilityBbc | 0 | 0 | This attribute specifies the transfer capability for this connection. Uni 3.0/3.1 traffic type and end-to-end timing parameters … |
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.74 | mscAtmIfVccVcdTmClippingBbc | 0 | 0 | This attribute specifies the value for the clipping susceptibility parameter in the BBC Information Element. This attribute is o… |
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.75 | mscAtmIfVccVcdTmBestEffort | 0 | 0 | This attribute specifies the value of the best effort parameter in the ATM Traffic Descriptor Information Element. This attribut… |
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.76 | mscAtmIfVccVcdTmTxPacketWiseDiscard | 0 | 0 | This attribute specifies whether packet-wise discard functions are to be enabled or disabled in the transmit data direction for … |
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.78 | mscAtmIfVccVcdTmRxPacketWiseDiscard | 0 | 0 | This attribute specifies whether packet-wise discard functions are to be enabled or disabled in the receive data direction for t… |
1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.90 | mscAtmIfVccVcdTmAbrConnectionType | 0 | 0 | This attribute specifies the type of ABR behavior which is to be enforced at this connection. This attribute is only applicable … |