This attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the service category
component under the AtmIf CA. If the service category has UPC
enforced or monitored, then UPC is set to that value for the
connection.
When disabled is selected, UPC for this connection is disabled
regardless of the provisioning of the service category.
When enforced is selected, UPC for this connection is enforced
regardless of the provisioning of the service category.
Note that setting UPC to enforced or monitored may have no effect
under certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc, Vpc, and Vpt components.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the service category
component under the AtmIf CA. If the service category has UPC
enforced or monitored, then UPC is set to that value for the
connection.
When disabled is selected, UPC for this connection is disabled
regardless of the provisioning of the service category.
When enforced is selected, UPC for this connection is enforced
regardless of the provisioning of the service category.
Note that setting UPC to enforced or monitored may have no effect
under certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc, Vpc, and Vpt components.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfVccVcdTmUsageParameterControl OBJECT-TYPE SYNTAX INTEGER { enforced(0), disabled(1), sameAsCa(2), monitored(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the service category component under the AtmIf CA. If the service category has UPC enforced or monitored, then UPC is set to that value for the connection. When disabled is selected, UPC for this connection is disabled regardless of the provisioning of the service category. When enforced is selected, UPC for this connection is enforced regardless of the provisioning of the service category. Note that setting UPC to enforced or monitored may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc, Vpc, and Vpt components." DEFVAL { sameAsCa } ::= { mscAtmIfVccVcdTmProvEntry 70 }
mscAtmIfVccVcdTmUsageParameterControl OBJECT-TYPE SYNTAX INTEGER { enforced(0), disabled(1), sameAsCa(2), monitored(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the service category component under the AtmIf CA. If the service category has UPC enforced or monitored, then UPC is set to that value for the connection. When disabled is selected, UPC for this connection is disabled regardless of the provisioning of the service category. When enforced is selected, UPC for this connection is enforced regardless of the provisioning of the service category. Note that setting UPC to enforced or monitored may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc, Vpc, and Vpt components." DEFVAL { sameAsCa } ::= { mscAtmIfVccVcdTmProvEntry 70 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.10 | mscAtmIfVccVcdTmTxTrafficDescType | 0 | 0 | This attribute specifies the type of traffic management which is applied to the transmit direction of this connection as defined… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.21 | mscAtmIfVccVcdTmFwdQosClass | 0 | 0 | This attribute specifies the quality of service for the forward direction for this connection. This attribute is only used for S… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.22 | mscAtmIfVccVcdTmTxQueueLimit | 0 | 0 | This attribute specifies an override to the default transmit queue limit for this connection. An value other than sameAsCa may b… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.25 | mscAtmIfVccVcdTmHoldingPriority | 0 | 0 | This attribute specifies the holding priority of this connection. In a situation where the link bandwidth fluctuates, such as ov… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.30 | mscAtmIfVccVcdTmRxTrafficDescType | 0 | 0 | This attribute specifies the type of traffic management which is applied to the receive direction of this connection as defined … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.41 | mscAtmIfVccVcdTmBwdQosClass | 0 | 0 | This attribute specifies the quality of service for the backward direction for this connection. This attribute is only used for … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.42 | mscAtmIfVccVcdTmAtmServiceCategory | 0 | 0 | This attribute specifies the ATM service category for both directions of the connection. The value derivedFromBBC may only be us… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.50 | mscAtmIfVccVcdTmTrafficShaping | 0 | 0 | This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. This attri… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.60 | mscAtmIfVccVcdTmUnshapedTransmitQueueing | 0 | 0 | This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this con… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.61 | mscAtmIfVccVcdTmWeight | 0 | 0 | This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connection… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.62 | mscAtmIfVccVcdTmForceTagging | 0 | 0 | This attribute specifies whether force tagging is enforced for this connection for cells in the transmit direction. On CQC-based… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.71 | mscAtmIfVccVcdTmBearerClassBbc | 0 | 0 | This attribute specifies the bearer capability. This attribute is only used for SPVC and SPVP connections. It is one of the Broa… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.72 | mscAtmIfVccVcdTmTransferCapabilityBbc | 0 | 0 | This attribute specifies the transfer capability for this connection. Uni 3.0/3.1 traffic type and end-to-end timing parameters … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.74 | mscAtmIfVccVcdTmClippingBbc | 0 | 0 | This attribute specifies the value for the clipping susceptibility parameter in the BBC Information Element. This attribute is o… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.75 | mscAtmIfVccVcdTmBestEffort | 0 | 0 | This attribute specifies the value of the best effort parameter in the ATM Traffic Descriptor Information Element. This attribut… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.76 | mscAtmIfVccVcdTmTxPacketWiseDiscard | 0 | 0 | This attribute specifies whether packet-wise discard functions are to be enabled or disabled in the transmit data direction for … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.78 | mscAtmIfVccVcdTmRxPacketWiseDiscard | 0 | 0 | This attribute specifies whether packet-wise discard functions are to be enabled or disabled in the receive data direction for t… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.90 | mscAtmIfVccVcdTmAbrConnectionType | 0 | 0 | This attribute specifies the type of ABR behavior which is to be enforced at this connection. This attribute is only applicable … |