This attribute specifies an override for the weight of this unshaped
connection. This attribute is ignored for shaped connections, for
ABR connections, for connections on a CQC-based ATM FP and
basic Vpts.
When the value is set to sameAsCa, the weight is determined by the
fairnessWeight attribute under the CA service category component
for all but standard Vpt Vccs. For standard Vpt Vccs, the weight is
determined by the Vcc's service category, when the value is set to
sameAsCa.
When this attribute is set to a value from 1 to 4095, that value is
used for the fairness weight of this connection relative to other
connections. For all but standard Vpt Vccs, fairness weight
determines the proportion of transmit cell opportunities which are
allocated to this connection, compared to other connections in the
same service category. For standard Vpt Vccs, fairness weight
determines the proportion of transmit cell opportunities which are
allocated to this connection, compared to other connections
associated with the Vpt.
When the value is set to upToQueueLimit, the fairness weight is
limited only by the txQueueLimit.
VALUES (
0 = upToQueueLimit
65535 = sameAsCa
)
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies an override for the weight of this unshaped
connection. This attribute is ignored for shaped connections, for
ABR connections, for connections on a CQC-based ATM FP and
basic Vpts.
When the value is set to sameAsCa, the weight is determined by the
fairnessWeight attribute under the CA service category component
for all but standard Vpt Vccs. For standard Vpt Vccs, the weight is
determined by the Vcc's service category, when the value is set to
sameAsCa.
When this attribute is set to a value from 1 to 4095, that value is
used for the fairness weight of this connection relative to other
connections. For all but standard Vpt Vccs, fairness weight
determines the proportion of transmit cell opportunities which are
allocated to this connection, compared to other connections in the
same service category. For standard Vpt Vccs, fairness weight
determines the proportion of transmit cell opportunities which are
allocated to this connection, compared to other connections
associated with the Vpt.
When the value is set to upToQueueLimit, the fairness weight is
limited only by the txQueueLimit.
VALUES (
0 = upToQueueLimit
65535 = sameAsCa
)
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfVccVcdTmWeight OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4095 | 65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic Vpts. When the value is set to sameAsCa, the weight is determined by the fairnessWeight attribute under the CA service category component for all but standard Vpt Vccs. For standard Vpt Vccs, the weight is determined by the Vcc's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the fairness weight of this connection relative to other connections. For all but standard Vpt Vccs, fairness weight determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard Vpt Vccs, fairness weight determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the Vpt. When the value is set to upToQueueLimit, the fairness weight is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )" DEFVAL { 65535 } ::= { mscAtmIfVccVcdTmProvEntry 61 }
mscAtmIfVccVcdTmWeight OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4095 | 65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic Vpts. When the value is set to sameAsCa, the weight is determined by the fairnessWeight attribute under the CA service category component for all but standard Vpt Vccs. For standard Vpt Vccs, the weight is determined by the Vcc's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the fairness weight of this connection relative to other connections. For all but standard Vpt Vccs, fairness weight determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard Vpt Vccs, fairness weight determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the Vpt. When the value is set to upToQueueLimit, the fairness weight is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )" DEFVAL { 65535 } ::= { mscAtmIfVccVcdTmProvEntry 61 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.10 | mscAtmIfVccVcdTmTxTrafficDescType | 0 | 0 | This attribute specifies the type of traffic management which is applied to the transmit direction of this connection as defined… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.21 | mscAtmIfVccVcdTmFwdQosClass | 0 | 0 | This attribute specifies the quality of service for the forward direction for this connection. This attribute is only used for S… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.22 | mscAtmIfVccVcdTmTxQueueLimit | 0 | 0 | This attribute specifies an override to the default transmit queue limit for this connection. An value other than sameAsCa may b… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.25 | mscAtmIfVccVcdTmHoldingPriority | 0 | 0 | This attribute specifies the holding priority of this connection. In a situation where the link bandwidth fluctuates, such as ov… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.30 | mscAtmIfVccVcdTmRxTrafficDescType | 0 | 0 | This attribute specifies the type of traffic management which is applied to the receive direction of this connection as defined … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.41 | mscAtmIfVccVcdTmBwdQosClass | 0 | 0 | This attribute specifies the quality of service for the backward direction for this connection. This attribute is only used for … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.42 | mscAtmIfVccVcdTmAtmServiceCategory | 0 | 0 | This attribute specifies the ATM service category for both directions of the connection. The value derivedFromBBC may only be us… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.50 | mscAtmIfVccVcdTmTrafficShaping | 0 | 0 | This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. This attri… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.60 | mscAtmIfVccVcdTmUnshapedTransmitQueueing | 0 | 0 | This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this con… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.62 | mscAtmIfVccVcdTmForceTagging | 0 | 0 | This attribute specifies whether force tagging is enforced for this connection for cells in the transmit direction. On CQC-based… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.70 | mscAtmIfVccVcdTmUsageParameterControl | 0 | 0 | This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface.… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.71 | mscAtmIfVccVcdTmBearerClassBbc | 0 | 0 | This attribute specifies the bearer capability. This attribute is only used for SPVC and SPVP connections. It is one of the Broa… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.72 | mscAtmIfVccVcdTmTransferCapabilityBbc | 0 | 0 | This attribute specifies the transfer capability for this connection. Uni 3.0/3.1 traffic type and end-to-end timing parameters … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.74 | mscAtmIfVccVcdTmClippingBbc | 0 | 0 | This attribute specifies the value for the clipping susceptibility parameter in the BBC Information Element. This attribute is o… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.75 | mscAtmIfVccVcdTmBestEffort | 0 | 0 | This attribute specifies the value of the best effort parameter in the ATM Traffic Descriptor Information Element. This attribut… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.76 | mscAtmIfVccVcdTmTxPacketWiseDiscard | 0 | 0 | This attribute specifies whether packet-wise discard functions are to be enabled or disabled in the transmit data direction for … |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.78 | mscAtmIfVccVcdTmRxPacketWiseDiscard | 0 | 0 | This attribute specifies whether packet-wise discard functions are to be enabled or disabled in the receive data direction for t… |
| 1.3.6.1.4.1.562.36.2.1.114.5.2.2.100.1.90 | mscAtmIfVccVcdTmAbrConnectionType | 0 | 0 | This attribute specifies the type of ABR behavior which is to be enforced at this connection. This attribute is only applicable … |