Reference record for OID 1.3.6.1.4.1.9.9.384

parent

1.3.6.1.4.1.9.9 (ciscoMgmt)

node code

384

node name

ciscoDot11AntennaMIB

dot oid

1.3.6.1.4.1.9.9.384

type

OBJECT IDENTIFIER

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoDot11AntennaMIB(384)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoDot11AntennaMIB(384)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoDot11AntennaMIB(384)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoDot11AntennaMIB(384)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoDot11AntennaMIB(384)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoDot11AntennaMIB(384)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoDot11AntennaMIB

/iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoDot11AntennaMIB

/iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoDot11AntennaMIB

/iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoDot11AntennaMIB

/iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoDot11AntennaMIB

/iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoDot11AntennaMIB

Description by cisco

This MIB is intended to be implemented on 802.11
Access Points and Wireless Bridges to provide
information about the antennas connected to their
802.11 interfaces. The NMS retrieves the configured
antenna parameters and uses it to calculate the
recommended radio settings to be applied to the Access
Points being managed to achieve optimum coverage and
throughput.

GLOSSARY

Access Point ( AP )

An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.

Wireless Bridge

An 802.11 entity that provides wireless connectivity
between two wired LAN segments and is used in point-
to-point or point-multipoint configurations.

Repeater-AP

A repeater is a 'wireless AP' that is attached to a
parent AP on an 802.11 primary port. The Ethernet
port is disabled in a Repeater-AP.

Antenna

A passive device connected to the 802.11 interface
that is used for transmission and reception of the
radio signals. Antennas transmit radio signals
in all directions (omnidirectional) or in a
particular direction(directional, high-gain).

Antenna Gain

The Antenna Gain is the measure of the amount of
amplification done on the input radio signal by
the antenna. Amplification is done by virtue of
focussing the RF radiation into a tighter beam.
Antenna Gain is expressed as dBi units.

Attenuator

An attenuator circuit allows a known source of power
to be reduced by a predetermined factor usually
expressed as decibels. This power reduction is
achieved by the attenuator without introducing
distortion. An attenuator may be used in either
audio or radio signal circuits.

Information by cisco_v1

ciscoDot11AntennaMIB OBJECT IDENTIFIER ::= { ciscoMgmt 384 }

Information by cisco

ciscoDot11AntennaMIB       MODULE-IDENTITY
        LAST-UPDATED       "201602150000Z"
        ORGANIZATION       "Cisco System Inc."
        CONTACT-INFO  
                   "        Cisco Systems,
                            Customer Service
                            Postal: 170 West Tasman Drive
	 		            San Jose, CA  95134
			            USA
                            Tel: +1 800 553-NETS                 
                 
                            E-mail: [email protected]"

        DESCRIPTION
                "This MIB is intended to be implemented on 802.11
                Access Points and Wireless Bridges to provide
                information about the antennas connected to their
                802.11 interfaces.  The NMS retrieves the configured
                antenna parameters and uses it to calculate the
                recommended radio settings to be applied to the Access
                Points being managed to achieve optimum coverage and
                throughput.

                                   GLOSSARY

                Access Point ( AP )

                An entity that contains an 802.11 medium access
                control ( MAC ) and physical layer ( PHY ) interface
                and provides access to the distribution services via
                the wireless medium for associated clients.

                Wireless Bridge

                An 802.11 entity that provides wireless connectivity
                between two wired LAN segments and is used in point-
                to-point or point-multipoint configurations.

                Repeater-AP

                A repeater is a 'wireless AP' that is attached to a
                parent AP on an 802.11 primary port.  The Ethernet
                port is disabled in a Repeater-AP.

                Antenna

                A passive device connected to the 802.11 interface
                that is used for transmission and reception of the
                radio signals.  Antennas transmit radio signals
                in all directions (omnidirectional) or in a
                particular direction(directional, high-gain).

                Antenna Gain

                The Antenna Gain is the measure of the amount of
                amplification done on the input radio signal by
                the antenna.  Amplification is done by virtue of
                focussing the RF radiation into a tighter beam.
                Antenna Gain is expressed as dBi units.

                Attenuator

                An attenuator circuit allows a known source of power
                to be reduced by a predetermined factor usually
                expressed as decibels.  This power reduction is
                achieved by the attenuator without introducing
                distortion.  An attenuator may be used in either
                audio or radio signal circuits. "
		
        REVISION      "201602150000Z"		
        DESCRIPTION
                "Changed ciscoDot11AntennaMIB OID from 3333 to 384. "		
        REVISION      "200312080000Z"
        DESCRIPTION
                "Initial version of this MIB module. "
        ::= { ciscoMgmt 384 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Children (2)

Brothers (645)

To many brothers! Only 100 nearest brothers are shown.