Reference record for OID 1.3.6.1.4.1.9.9.387


parent
1.3.6.1.4.1.9.9 (ciscoMgmt)
node code
387
node name
ciscoNetflowMIB
dot oid
1.3.6.1.4.1.9.9.387
type
OBJECT IDENTIFIER
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoNetflowMIB(387)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoNetflowMIB(387)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoNetflowMIB(387)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoNetflowMIB(387)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoNetflowMIB(387)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoNetflowMIB(387)}
  • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoNetflowMIB
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoNetflowMIB
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoNetflowMIB
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoNetflowMIB
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoNetflowMIB
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoNetflowMIB
  • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/387

    Description by circitor

    The Netflow MIB provides a simple and easy method
    to get NetFlow cache information, current NetFlow
    configuration and statistics. It will enable medium to
    small size enterprises to take advantage of NetFlow
    technology over SNMP at a reduced infrastructure cost.
    The MIB is created to provide Netflow information in
    these areas:

    1. Cache information and configuration.
    2. Export information and configuration.
    4. Export Statistics.
    5. Protocol Statistics.
    6. Version 9 Export Template information.
    7. Top Flows information.


    Terminology used

    Flow
    A flow is defined as an unidirectional sequence of
    packets between a given source and destination
    endpoints. Network flows are highly granular;
    flow endpoints are identified both by IP address as
    well as by transport layer application port numbers.
    NetFlow also utilizes the IP Protocol type,
    Type of Service (ToS) and the input interface
    identifier to uniquely identify flows.

    Exporter
    A device (for example, a router) with NetFlow
    services enabled. The exporter monitors packets
    entering an observation point and creates flows out
    of these packets. The information from these flows
    are exported in the form of Flow Records to
    the collector.

    Flow Record
    A Flow Record provides information about an IP Flow
    that exists on the Exporter. The Flow Records are
    commonly referred to as NetFlow Services data or
    NetFlow data.

    Collector
    The NetFlow Collector receives Flow Records from
    one or more Exporters. It processes the received
    export packet, i.e. parses, stores the Flow Record
    information. The flow records may be optionally
    aggregated before storing into the hard disk.

    Template
    NetFlow Version 9 Export format is template based.
    Version 9 record format consists of a packet header
    followed by at least one or more template or data
    FlowSets. A template FlowSet (collection of one or more
    template) provides a description of the fields that
    will be present in future data FlowSets. Templates
    provide an extensible design to the record format,
    a feature that should allow future enhancements to
    NetFlow services without requiring concurrent changes
    to the basic flow-record format.

    One additional record type is also a part of
    Version 9 specification: an options template. Rather
    than supplying information about IP flows, options are
    used to supply meta-data about the NetFlow process
    itself.


    Top Flows.

    This feature provides a mechanism which allows the
    top N flows in the netflow cache to be viewed
    in real time.

    Criteria can be set to limit the feature to particular
    flows of interest, which can aid in DoS detection.

    Only the number of flows (TopN) and the sort criteria
    (SortBy) need be set.

    Top Flows is not intended as a mechanism for exporting
    the entire netflow cache.


    Egress flows.

    This feature provides a mechanism to identify a flow
    as either an ingress or an egress flow.

    Parsed from file CISCO-NETFLOW-MIB.mib
    Module: CISCO-NETFLOW-MIB

    Description by mibdepot

    The Netflow MIB provides a simple and easy method
    to get NetFlow cache information, current NetFlow
    configuration and statistics. It will enable medium to
    small size enterprises to take advantage of NetFlow
    technology over SNMP at a reduced infrastructure cost.
    The MIB is created to provide Netflow information in
    these areas:

    1. Cache information and configuration.
    2. Export information and configuration.
    4. Export Statistics.
    5. Protocol Statistics.
    6. Version 9 Export Template information.
    7. Top Flows information.


    Terminology used

    Flow
    A flow is defined as an unidirectional sequence of
    packets between a given source and destination
    endpoints. Network flows are highly granular;
    flow endpoints are identified both by IP address as
    well as by transport layer application port numbers.
    NetFlow also utilizes the IP Protocol type,
    Type of Service (ToS) and the input interface
    identifier to uniquely identify flows.

    Exporter
    A device (for example, a router) with NetFlow
    services enabled. The exporter monitors packets
    entering an observation point and creates flows out
    of these packets. The information from these flows
    are exported in the form of Flow Records to
    the collector.

    Flow Record
    A Flow Record provides information about an IP Flow
    that exists on the Exporter. The Flow Records are
    commonly referred to as NetFlow Services data or
    NetFlow data.

    Collector
    The NetFlow Collector receives Flow Records from
    one or more Exporters. It processes the received
    export packet, i.e. parses, stores the Flow Record
    information. The flow records may be optionally
    aggregated before storing into the hard disk.

    Template
    NetFlow Version 9 Export format is template based.
    Version 9 record format consists of a packet header
    followed by at least one or more template or data
    FlowSets. A template FlowSet (collection of one or more
    template) provides a description of the fields that
    will be present in future data FlowSets. Templates
    provide an extensible design to the record format,
    a feature that should allow future enhancements to
    NetFlow services without requiring concurrent changes
    to the basic flow-record format.

    One additional record type is also a part of
    Version 9 specification: an options template. Rather
    than supplying information about IP flows, options are
    used to supply meta-data about the NetFlow process
    itself.


    Top Flows.

    This feature provides a mechanism which allows the
    top N flows in the netflow cache to be viewed
    in real time.

    Criteria can be set to limit the feature to particular
    flows of interest, which can aid in DoS detection.

    Only the number of flows (TopN) and the sort criteria
    (SortBy) need be set.

    Top Flows is not intended as a mechanism for exporting
    the entire netflow cache.


    Egress flows.

    This feature provides a mechanism to identify a flow
    as either an ingress or an egress flow.

    Parsed from file CISCO-NETFLOW-MIB.my.txt
    Company: None
    Module: CISCO-NETFLOW-MIB

    Description by cisco

    The Netflow MIB provides a simple and easy method
    to get NetFlow cache information, current NetFlow
    configuration and statistics. It will enable medium to
    small size enterprises to take advantage of NetFlow
    technology over SNMP at a reduced infrastructure cost.
    The MIB is created to provide Netflow information in
    these areas:

    1. Cache information and configuration.
    2. Export information and configuration.
    4. Export Statistics.
    5. Protocol Statistics.
    6. Version 9 Export Template information.
    7. Top Flows information.


    Terminology used

    Flow
    A flow is defined as an unidirectional sequence of
    packets between a given source and destination
    endpoints. Network flows are highly granular;
    flow endpoints are identified both by IP address as
    well as by transport layer application port numbers.
    NetFlow also utilizes the IP Protocol type,
    Type of Service (ToS) and the input interface
    identifier to uniquely identify flows.

    Exporter
    A device (for example, a router) with NetFlow
    services enabled. The exporter monitors packets
    entering an observation point and creates flows out
    of these packets. The information from these flows
    are exported in the form of Flow Records to
    the collector.

    Flow Record
    A Flow Record provides information about an IP Flow
    that exists on the Exporter. The Flow Records are
    commonly referred to as NetFlow Services data or
    NetFlow data.

    Collector
    The NetFlow Collector receives Flow Records from
    one or more Exporters. It processes the received
    export packet, i.e. parses, stores the Flow Record
    information. The flow records may be optionally
    aggregated before storing into the hard disk.

    Template
    NetFlow Version 9 Export format is template based.
    Version 9 record format consists of a packet header
    followed by at least one or more template or data
    FlowSets. A template FlowSet (collection of one or more
    template) provides a description of the fields that
    will be present in future data FlowSets. Templates
    provide an extensible design to the record format,
    a feature that should allow future enhancements to
    NetFlow services without requiring concurrent changes
    to the basic flow-record format.

    One additional record type is also a part of
    Version 9 specification: an options template. Rather
    than supplying information about IP flows, options are
    used to supply meta-data about the NetFlow process
    itself.


    Top Flows.

    This feature provides a mechanism which allows the
    top N flows in the netflow cache to be viewed
    in real time.

    Criteria can be set to limit the feature to particular
    flows of interest, which can aid in DoS detection.

    Only the number of flows (TopN) and the sort criteria
    (SortBy) need be set.

    Top Flows is not intended as a mechanism for exporting
    the entire netflow cache.


    Egress flows.

    This feature provides a mechanism to identify a flow
    as either an ingress or an egress flow.

    Information by circitor

    ciscoNetflowMIB MODULE-IDENTITY LAST-UPDATED "200604270000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The Netflow MIB provides a simple and easy method to get NetFlow cache information, current NetFlow configuration and statistics. It will enable medium to small size enterprises to take advantage of NetFlow technology over SNMP at a reduced infrastructure cost. The MIB is created to provide Netflow information in these areas: 1. Cache information and configuration. 2. Export information and configuration. 4. Export Statistics. 5. Protocol Statistics. 6. Version 9 Export Template information. 7. Top Flows information. Terminology used Flow A flow is defined as an unidirectional sequence of packets between a given source and destination endpoints. Network flows are highly granular; flow endpoints are identified both by IP address as well as by transport layer application port numbers. NetFlow also utilizes the IP Protocol type, Type of Service (ToS) and the input interface identifier to uniquely identify flows. Exporter A device (for example, a router) with NetFlow services enabled. The exporter monitors packets entering an observation point and creates flows out of these packets. The information from these flows are exported in the form of Flow Records to the collector. Flow Record A Flow Record provides information about an IP Flow that exists on the Exporter. The Flow Records are commonly referred to as NetFlow Services data or NetFlow data. Collector The NetFlow Collector receives Flow Records from one or more Exporters. It processes the received export packet, i.e. parses, stores the Flow Record information. The flow records may be optionally aggregated before storing into the hard disk. Template NetFlow Version 9 Export format is template based. Version 9 record format consists of a packet header followed by at least one or more template or data FlowSets. A template FlowSet (collection of one or more template) provides a description of the fields that will be present in future data FlowSets. Templates provide an extensible design to the record format, a feature that should allow future enhancements to NetFlow services without requiring concurrent changes to the basic flow-record format. One additional record type is also a part of Version 9 specification: an options template. Rather than supplying information about IP flows, options are used to supply meta-data about the NetFlow process itself. Top Flows. This feature provides a mechanism which allows the top N flows in the netflow cache to be viewed in real time. Criteria can be set to limit the feature to particular flows of interest, which can aid in DoS detection. Only the number of flows (TopN) and the sort criteria (SortBy) need be set. Top Flows is not intended as a mechanism for exporting the entire netflow cache. Egress flows. This feature provides a mechanism to identify a flow as either an ingress or an egress flow." REVISION "200604270000Z" DESCRIPTION "Added the following Group: cnfTopFlowsReportGenerateGroup" REVISION "200604200000Z" DESCRIPTION "Added the cache type expBgpPrefix" REVISION "200508300000Z" DESCRIPTION "Added the following Groups: cnfMcastNetflowControlGroup cnfBridgedFlowStatsCtrlGroup" REVISION "200503270000Z" DESCRIPTION "Removed OBJECT IDENTIFIER ::= { ciscoNetflowMIBObjects 3 }." REVISION "200405180000Z" DESCRIPTION "Added the following objects: cnfTopFlowsGenerate cnfTopFlowsReportAvailable cnfTopFlowsVlan Deprecated the Group cnfTopFlowsGroup. Added the following Groups: cnfTopFlowsDataGroup1 cnfTopFlowsDataGroup2 cnfTopFlowsVlanGroup cnfTopFlowsControlGroup1 cnfTopFlowsControlGroup2" REVISION "200401090000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 387 }

    Information by cisco_v1

    ciscoNetflowMIB OBJECT IDENTIFIER ::= { ciscoMgmt 387 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-NETFLOW-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    ciscoNetflowMIB MODULE-IDENTITY LAST-UPDATED "200604270000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The Netflow MIB provides a simple and easy method to get NetFlow cache information, current NetFlow configuration and statistics. It will enable medium to small size enterprises to take advantage of NetFlow technology over SNMP at a reduced infrastructure cost. The MIB is created to provide Netflow information in these areas: 1. Cache information and configuration. 2. Export information and configuration. 4. Export Statistics. 5. Protocol Statistics. 6. Version 9 Export Template information. 7. Top Flows information. Terminology used Flow A flow is defined as an unidirectional sequence of packets between a given source and destination endpoints. Network flows are highly granular; flow endpoints are identified both by IP address as well as by transport layer application port numbers. NetFlow also utilizes the IP Protocol type, Type of Service (ToS) and the input interface identifier to uniquely identify flows. Exporter A device (for example, a router) with NetFlow services enabled. The exporter monitors packets entering an observation point and creates flows out of these packets. The information from these flows are exported in the form of Flow Records to the collector. Flow Record A Flow Record provides information about an IP Flow that exists on the Exporter. The Flow Records are commonly referred to as NetFlow Services data or NetFlow data. Collector The NetFlow Collector receives Flow Records from one or more Exporters. It processes the received export packet, i.e. parses, stores the Flow Record information. The flow records may be optionally aggregated before storing into the hard disk. Template NetFlow Version 9 Export format is template based. Version 9 record format consists of a packet header followed by at least one or more template or data FlowSets. A template FlowSet (collection of one or more template) provides a description of the fields that will be present in future data FlowSets. Templates provide an extensible design to the record format, a feature that should allow future enhancements to NetFlow services without requiring concurrent changes to the basic flow-record format. One additional record type is also a part of Version 9 specification: an options template. Rather than supplying information about IP flows, options are used to supply meta-data about the NetFlow process itself. Top Flows. This feature provides a mechanism which allows the top N flows in the netflow cache to be viewed in real time. Criteria can be set to limit the feature to particular flows of interest, which can aid in DoS detection. Only the number of flows (TopN) and the sort criteria (SortBy) need be set. Top Flows is not intended as a mechanism for exporting the entire netflow cache. Egress flows. This feature provides a mechanism to identify a flow as either an ingress or an egress flow." REVISION "200604270000Z" DESCRIPTION "Added the following Group: cnfTopFlowsReportGenerateGroup" REVISION "200604200000Z" DESCRIPTION "Added the cache type expBgpPrefix" REVISION "200508300000Z" DESCRIPTION "Added the following Groups: cnfMcastNetflowControlGroup cnfBridgedFlowStatsCtrlGroup" REVISION "200503270000Z" DESCRIPTION "Removed OBJECT IDENTIFIER ::= { ciscoNetflowMIBObjects 3 }." REVISION "200405180000Z" DESCRIPTION "Added the following objects: cnfTopFlowsGenerate cnfTopFlowsReportAvailable cnfTopFlowsVlan Deprecated the Group cnfTopFlowsGroup. Added the following Groups: cnfTopFlowsDataGroup1 cnfTopFlowsDataGroup2 cnfTopFlowsVlanGroup cnfTopFlowsControlGroup1 cnfTopFlowsControlGroup2" REVISION "200401090000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 387 }

    Information by cisco

    ciscoNetflowMIB MODULE-IDENTITY LAST-UPDATED "200604270000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The Netflow MIB provides a simple and easy method to get NetFlow cache information, current NetFlow configuration and statistics. It will enable medium to small size enterprises to take advantage of NetFlow technology over SNMP at a reduced infrastructure cost. The MIB is created to provide Netflow information in these areas: 1. Cache information and configuration. 2. Export information and configuration. 4. Export Statistics. 5. Protocol Statistics. 6. Version 9 Export Template information. 7. Top Flows information. Terminology used Flow A flow is defined as an unidirectional sequence of packets between a given source and destination endpoints. Network flows are highly granular; flow endpoints are identified both by IP address as well as by transport layer application port numbers. NetFlow also utilizes the IP Protocol type, Type of Service (ToS) and the input interface identifier to uniquely identify flows. Exporter A device (for example, a router) with NetFlow services enabled. The exporter monitors packets entering an observation point and creates flows out of these packets. The information from these flows are exported in the form of Flow Records to the collector. Flow Record A Flow Record provides information about an IP Flow that exists on the Exporter. The Flow Records are commonly referred to as NetFlow Services data or NetFlow data. Collector The NetFlow Collector receives Flow Records from one or more Exporters. It processes the received export packet, i.e. parses, stores the Flow Record information. The flow records may be optionally aggregated before storing into the hard disk. Template NetFlow Version 9 Export format is template based. Version 9 record format consists of a packet header followed by at least one or more template or data FlowSets. A template FlowSet (collection of one or more template) provides a description of the fields that will be present in future data FlowSets. Templates provide an extensible design to the record format, a feature that should allow future enhancements to NetFlow services without requiring concurrent changes to the basic flow-record format. One additional record type is also a part of Version 9 specification: an options template. Rather than supplying information about IP flows, options are used to supply meta-data about the NetFlow process itself. Top Flows. This feature provides a mechanism which allows the top N flows in the netflow cache to be viewed in real time. Criteria can be set to limit the feature to particular flows of interest, which can aid in DoS detection. Only the number of flows (TopN) and the sort criteria (SortBy) need be set. Top Flows is not intended as a mechanism for exporting the entire netflow cache. Egress flows. This feature provides a mechanism to identify a flow as either an ingress or an egress flow." REVISION "200604270000Z" DESCRIPTION "Added the following Group: cnfTopFlowsReportGenerateGroup" REVISION "200604200000Z" DESCRIPTION "Added the cache type expBgpPrefix" REVISION "200508300000Z" DESCRIPTION "Added the following Groups: cnfMcastNetflowControlGroup cnfBridgedFlowStatsCtrlGroup" REVISION "200503270000Z" DESCRIPTION "Removed OBJECT IDENTIFIER ::= { ciscoNetflowMIBObjects 3 }." REVISION "200405180000Z" DESCRIPTION "Added the following objects: cnfTopFlowsGenerate cnfTopFlowsReportAvailable cnfTopFlowsVlan Deprecated the Group cnfTopFlowsGroup. Added the following Groups: cnfTopFlowsDataGroup1 cnfTopFlowsDataGroup2 cnfTopFlowsVlanGroup cnfTopFlowsControlGroup1 cnfTopFlowsControlGroup2" REVISION "200401090000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 387 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Children (3)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.387.0 ciscoNetflowMIBNotifs 0 0 None
    1.3.6.1.4.1.9.9.387.1 ciscoNetflowMIBObjects 6 183 None
    1.3.6.1.4.1.9.9.387.2 ciscoNetflowMIBConform 2 20 None

    Brothers (645)

    To many brothers! Only 100 nearest brothers are shown.

    OIDNameSub childrenSub Nodes TotalDescription
    ...
    1.3.6.1.4.1.9.9.339 ciscoSecureShellMIB 2 40 MIB module for displaying and configuring
    accounting and Secure Shell (SSH) related
    features in a device.

    SSH is a program to log …
    1.3.6.1.4.1.9.9.340 ciscoLreCpeMIB 3 21 The MIB module for the Cisco Long Reach Ethernet
    Customer Premise Equipment device information.

    *** ABBREVIATIONS, ACRONYMS, AND …
    1.3.6.1.4.1.9.9.341 ciscoCableQosMonitorMIB 3 57 This is the MIB module for subscriber QoS monitoring
    for DOCSIS-compliant Cable Modem Termination Systems
    (CMTS).

    Several subscrib…
    1.3.6.1.4.1.9.9.343 ciscoAuthorizationStatsMibModule 2 25 The Cisco User Authorization Statistics MIB models
    counters and objects that are of management
    interest.
    1.3.6.1.4.1.9.9.344 ciscoEntityDisplayMIB 2 21 This MIB module provides information about the
    status of display devices such as Light Emitting
    Diodes (LEDs) and alphanumeric di…
    1.3.6.1.4.1.9.9.350 ciscoEntityDiagMIB 3 139 This MIB module defines the managed objects that describe the
    online diagnostics capabilities supported by the
    physical entities …
    1.3.6.1.4.1.9.9.351 ciscoAtmTrunkMIB 3 102 The MIB for voice and Nx64 over ATM Trunking applications.

    The following lists the abbreviations used in this MIB:
    AAL ATM …
    1.3.6.1.4.1.9.9.356 ciscoVoiceToneCadenceMIB 3 30 The MIB defines the attributes of the programmable
    tones specified in ITU-T E.180 Supplement 2.

    Each country has its own regulati…
    1.3.6.1.4.1.9.9.358 ciscoBbsmMIB 3 20 This mib is designed to send BBSM specific
    notifications. There are variables that contain detail data
    that are bind to a notifi…
    1.3.6.1.4.1.9.9.359 ciscoLicenseMIB 3 52 This MIB module provides objects to view the features
    and services that are licensed to run on a system (usually
    a network entity…
    1.3.6.1.4.1.9.9.360 ciscoImageUpgradeMIB 3 101 This mib provides, objects to upgrade images on modules in the
    system, objects showing the status of the upgrade operation,
    and o…
    1.3.6.1.4.1.9.9.361 ciscoCommonRolesMIB 3 40 MIB module for managing the common roles between
    access methods like Command Line Interface (CLI), SNMP
    and XML interfaces.
    Every …
    1.3.6.1.4.1.9.9.362 ciscoPortStormControlMIB 3 41 The MIB module for managing Cisco Port Storm Control.
    1.3.6.1.4.1.9.9.363 ciscoFcSpanMIB 2 49 MIB module for displaying and configuring
    Switched Port Analyzer(SPAN) related features
    in a Fibre Channel device.

    SPAN is a featu…
    1.3.6.1.4.1.9.9.364 ciscoPsmMIB 3 213 The MIB module for the management of the
    Port Security Manager (PSM). The PSM
    consists of 2 aspects: Port binding and
    Fabric bindi…
    1.3.6.1.4.1.9.9.365 ciscoFCCMIB 3 42 The MIB module for the management of Fibre Channel
    Congestion Control(FCC). FCC is a Cisco proprietary
    flow control mechanism tha…
    1.3.6.1.4.1.9.9.367 ciscoAAAServerExtMIB 2 77 This MIB is an extension to the CISCO-AAA-SERVER-MIB.
    This MIB module enhances the 'casConfigTable' to
    include other types of Ser…
    1.3.6.1.4.1.9.9.368 368 0 0 Cisco Content Services (CSS) switch product, also known as Arrowpoint, for version 7.40 and later
    1.3.6.1.4.1.9.9.369 ciscoLicenseMgrMIB 3 74 The MIB module for a method of managing license files on
    the system.
    Licensing mechanism provides more flexibility in supporting
    v…
    1.3.6.1.4.1.9.9.370 ciscoSslProxyMIB 3 372 This MIB module is for managing a Secure Socket Layer
    (SSL) Proxy device which terminates and accelarates
    SSL and Transport Layer…
    1.3.6.1.4.1.9.9.371 ciscoIvrMIB 3 192 The MIB module for the management of Inter-VSAN
    routing within the framework of Cisco's
    Inter-VSAN Routing (IVR) Architecture. IV…
    1.3.6.1.4.1.9.9.372 ciscoIsnsClientMIB 3 16 MIB module for monitoring and configuring Internet
    Storage Name Service (iSNS) client.
    1.3.6.1.4.1.9.9.373 ciscoFdmiMIB 3 47 Fabric Device Management Interface (FDMI) MIB. This MIB
    module defines objects for managing the devices such as
    HBA (Host Bus Ada…
    1.3.6.1.4.1.9.9.374 ciscoDynamicArpInspectionMIB 3 82 The MIB module is for configuration of Dynamic ARP Inspection
    feature. Dynamic ARP Inspection is a security mechanism which
    valid…
    1.3.6.1.4.1.9.9.375 ciscoFiconMIB 3 176 This is the FICON (FIber CONnection) MIB module.

    FICON is an IBM standard of transport mechanism
    for communication between the ma…
    1.3.6.1.4.1.9.9.376 ciscoSVIAutostateMIB 3 19 The MIB module is for configuration of the switch virtual
    interface (SVI) autostate feature. Autostate feature
    is a mechanism to …
    1.3.6.1.4.1.9.9.377 ciscoFeatureCtrlMIB 3 53 There are two types of features in the system:

    - Regular features
    - Optional features

    The Regular features may or may not need to …
    1.3.6.1.4.1.9.9.378 ciscoSvcInterfaceMIB 3 115 MIB module for displaying and configuring
    SVC (SAN Volume Controller) related features
    in the Storage Area Network (SAN) switches…
    1.3.6.1.4.1.9.9.379 ciscoItpmMIB 3 47 The MIB for providing information related to
    monitoring SS7 links.

    This information can be used to manage the state
    of software u…
    1.3.6.1.4.1.9.9.380 ciscoDhcpSnoopingMIB 3 127 The MIB module is for configuration of DHCP Snooping
    feature. DHCP Snooping is a security mechanism which
    uses information gleane…
    1.3.6.1.4.1.9.9.381 ciscoDiffServExtMIB 2 49 This MIB is a Cisco extension to the
    DIFFSERV-MIB, RFC 3289. This MIB defines
    a Fibre Channel (FC) Multi Field filter to
    be used i…
    1.3.6.1.4.1.9.9.383 ciscoCidsMIB 3 183 Cisco Intrusion Detection System MIB. Provides
    trap definitions for the evAlert and evError
    elements of the IDIOM (Intrusion Det…
    1.3.6.1.4.1.9.9.384 ciscoDot11AntennaMIB 2 11 This MIB is intended to be implemented on 802.11
    Access Points and Wireless Bridges to provide
    information about the antennas con…
    1.3.6.1.4.1.9.9.385 ciscoUnityMIB 3 101 The MIB Module for the management of Cisco Unity server.
    Cisco Unity is a Unified Communications solution that provides
    advanced,…
    1.3.6.1.4.1.9.9.386 ciscoModuleAutoShutdownMIB 3 36 The CISCO-MODULE-AUTO-SHUTDOWN-MIB is used to configure
    the module automatic shutdown feature. Modules will be
    reset by the syste…
    1.3.6.1.4.1.9.9.388 ciscoVirtualSwitchMIB 3 128 This MIB module defines the managed objects that support the
    virtual switch architecture.

    The virtual switch concept combines sev…
    1.3.6.1.4.1.9.9.389 ciscoVoiceCasModuleMIB 3 22 This MIB is used to support Programmable
    CAS signaling Bit configuration on modules
    that support voice traffic.

    This MIB will enab…
    1.3.6.1.4.1.9.9.390 ciscoCableDiagMIB 3 33 This MIB module defines objects for managing cable
    diagnostic test capabilites supported by the Cisco devices.

    Cable diagnostic t…
    1.3.6.1.4.1.9.9.391 ciscoFcspMIB 3 46 MIB module for managing Fibre Channel Security for the
    fibre channel devices.

    This MIB is used to configure and monitor the
    Fibre-…
    1.3.6.1.4.1.9.9.392 ciscoRemoteAccessMonitorMIB 3 199 Acronyms and Definitions
    The following acronyms and terms are used in this
    document:

    IPSec: Secure IP Protocol

    VPN: Virtual Priv…
    1.3.6.1.4.1.9.9.393 ciscoVoiceConnectivityMIB 3 44 This MIB module provides connectivity related
    information for devices (e.g., 'connectivity between
    voice gateway, phones, gatekee…
    1.3.6.1.4.1.9.9.394 ciscoIpTapMIB 3 28 This module manages Cisco's intercept feature for IP.

    This MIB is used along with CISCO-TAP2-MIB to
    intercept IP traffic. CISCO-T…
    1.3.6.1.4.1.9.9.395 cisco802TapMIB 3 20 This module manages Cisco's intercept feature for
    802 (layer 2) streams.

    This MIB is used along with CISCO-TAP2-MIB to
    intercept 8…
    1.3.6.1.4.1.9.9.396 ciscoMlrMIB 3 190 The MIB for providing information about Multi-layer
    Routing(MLR). This MIB will provide information used to
    control and measure S…
    1.3.6.1.4.1.9.9.397 ciscoH225MIB 1 176 Cisco H225 MIB module. This module consists of H225
    call signaling and H225 RAS (Registration, Admission
    and Status). These are p…
    1.3.6.1.4.1.9.9.398 ciscoMauExtMIB 3 23 A MIB module for extending the MAU-MIB (RFC 3636)
    to add objects which provide additional management
    information about MAU or Jac…
    1.3.6.1.4.1.9.9.399 ciscoTap2MIB 3 69 This module manages Cisco's intercept feature.
    This MIB replaces CISCO-TAP-MIB. This MIB defines
    a generic stream table that cont…
    1.3.6.1.4.1.9.9.400 ciscoUserConnectionTapMIB 2 13 This module manages Cisco's intercept feature for
    user connections.

    This MIB is used along with CISCO-TAP2-MIB to
    intercept user t…
    1.3.6.1.4.1.9.9.401 ciscoBridgeExtMIB 3 34 A MIB module for extending BRIDGE-MIB specified in RFC 1493.
    1.3.6.1.4.1.9.9.402 ciscoPowerEthernetExtMIB 3 79 A MIB module for extending the POWER-ETHERNET-MIB
    (RFC3621) to add objects which provide additional
    management information about …
    1.3.6.1.4.1.9.9.405 ciscoDnsServerMIB 3 400 The MIB module for entities implementing the server side
    of the Domain Name System (DNS) protocol.
    P. Mockapetris, 'Domain names …
    1.3.6.1.4.1.9.9.407 ciscoAtmTrunkStatMIB 3 101 The MIB module contains ATM Trunk statistics.

    TERMINOLOGY

    PVC: Permanent Virtual Circuit
    OAM: Operation and Management
    CRC: Cyclic…
    1.3.6.1.4.1.9.9.408 ciscoSnmpNotificationExtMIB 3 13 This MIB extends the functionality provided
    by SNMP-NOTIFICATION-MIB.
    This MIB provides for the aging of the
    notification filters …
    1.3.6.1.4.1.9.9.409 ciscoSnmpVacmExtMIB 2 11 The management information definitions to extend
    the View-based Access Control Model (RFC3415) for
    SNMP.

    This MIB extends the 'SN…
    1.3.6.1.4.1.9.9.411 ciscoVlanTranslationMIB 3 27 The MIB module for the management of VLAN translations.

    VLAN translation refers to the ability of the device
    to translate between…
    1.3.6.1.4.1.9.9.412 ciscoSnmpTargetExtMIB 2 30 This MIB is an extension of the SNMP-TARGET-MIB
    specified in RFC3413.

    This MIB module contains Cisco-defined extension
    to the sn…
    1.3.6.1.4.1.9.9.413 ciscoDot11SsidSecMIB 2 71 This MIB module provides network management
    support for Cisco IEEE 802.11 Wireless LAN
    devices association and authentication.

    ACR…
    1.3.6.1.4.1.9.9.414 ciscoPoePdMIB 3 17 This MIB is intended for devices powered by
    external power sources, in particular Power
    Over Ethernet (PoE or formerly called inl…
    1.3.6.1.4.1.9.9.415 ciscoWlanManMIB 3 13 This MIB module provides network management
    and configuration support for IEEE 802.11
    Wireless LAN devices.

    ACRONYMS

    HTTP
    Hypertext …
    1.3.6.1.4.1.9.9.416 ciscoDot11QosMIB 3 49 This MIB module provides network management
    support for QoS on wireless LAN devices. The
    objects defined in this MIB provide equ…
    1.3.6.1.4.1.9.9.420 ciscoUnityExpressMIB 3 179 The MIB Module for the management of the Cisco Unity
    Express (CUE) service. CUE is a voicemail service that
    runs in a Cisco rout…
    1.3.6.1.4.1.9.9.421 ciscoDpvmMIB 3 55 The MIB module for the management of the
    Dynamic Port Vsan Membership (DPVM) module.
    DPVM provides the ability to assign (virtual…
    1.3.6.1.4.1.9.9.422 ciscoIPsecTc 0 0 This MIB module defines the textual conventions
    used in the IPsec suite of MIBs. This includes
    Internet DOI numbers defined in RF…
    1.3.6.1.4.1.9.9.423 ciscoIkeConfigMIB 3 93 This is a MIB Module for configuring and viewing IKE
    parameters and policies.

    Acronyms
    The following acronyms are used in this do…
    1.3.6.1.4.1.9.9.424 ciscoCableMeteringMIB 3 53 This is the MIB module for Usage Based Metering for the
    DOCSIS-compliant Cable Modem Termination Systems (CMTS).

    Usage Based Mete…
    1.3.6.1.4.1.9.9.426 ciscoLinkErrorMonitorMIB 3 34 The MIB module for managing Link Error Monitoring
    Feature on devices.

    Link Error Monitoring Feature provides a mechanism
    to monito…
    1.3.6.1.4.1.9.9.427 ciscoZsExtMIB 3 33 The MIB module for the management of zoning within
    the framework of Cisco's Zoning Server (ZS) Archi-
    tecture which realizes the …
    1.3.6.1.4.1.9.9.428 ciscoIkeFlowExtMIB 3 18 This MIB module is an extension to
    CISCO-IKE-FLOW-MIB and contains Cisco Specific
    extensions for monitoring IKE.

    It is for monito…
    1.3.6.1.4.1.9.9.429 ciscoIkeFlowMIB 3 80 This is a MIB module for monitoring the structures
    and status of IPsec control flows based on Internet
    Key Exchange protocol. The…
    1.3.6.1.4.1.9.9.430 ciscoFcDeviceAliasMIB 3 14 The MIB module for the management of Device
    Aliases in a Fibre Channel Fabric. A Fibre
    Channel fabric consists of devices such as…
    1.3.6.1.4.1.9.9.431 ciscoIPsecProvisioningMIB 3 98 IPSec is the next-generation network layer crypto
    framework described in RFC2401-2411.
    This MIB defines the IPsec configurations.…
    1.3.6.1.4.1.9.9.432 ciscoEnhancedIpsecFlowMIB 3 330 This is a MIB Module for monitoring the structures
    and status of IPSec-based networks. The MIB has been
    designed to be adopted as…
    1.3.6.1.4.1.9.9.433 ciscoCFSMIB 3 102 This MIB applies to one or more of a set of devices
    which have connectivity through some kind of 'fabric'.
    Many features which ru…
    1.3.6.1.4.1.9.9.434 ciscoIpNetworkDiscoveryMIB, ciscoIsnsIpNetDiscoveryMIB 3 58 MIB to provide the information about the disjoint
    IP networks connected to the various gigabit ethernet
    interfaces in the 'Fabric…
    1.3.6.1.4.1.9.9.435 ciscoFcMulticastMIB 3 14 MIB module for monitoring and configuring
    Fibre Channel Multicast feature.
    1.3.6.1.4.1.9.9.436 ciscoDNSClientMIB 3 28 The MIB module for entities implementing the client
    side of the Domain Name System (DNS) protocol.
    1.3.6.1.4.1.9.9.437 ciscoPortTrackMIB 2 18 A MIB to configure the Port-Track feature.

    When a link goes down, all the services which depend
    on the link are notified of the o…
    ...