OID reference

phaseRedRevert

1.3.6.1.4.1.1206.4.2.1.1.2.1.10

Description

Red revert time parameter in tenth seconds . A minimum Red indication to be timed following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. The unitRedRevert parameter shall act as a minimum red revert time for all signal displays. The phaseRedRevert parameter …

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.1206.4.2.1.1.2.1 (phaseEntry)
Node code
10
Node name
phaseRedRevert
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.1206.4.2.1.1.2.1.10
URN notation
urn:oid:1.3.6.1.4.1.1206.4.2.1.1.2.1.10
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 1206 4 2 1 1 2 1 10}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseRedRevert(10)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseRedRevert(10)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseRedRevert(10)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseRedRevert(10)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseRedRevert(10)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseRedRevert(10)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseRedRevert(10)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseRedRevert(10)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseRedRevert(10)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseRedRevert(10)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseRedRevert(10)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseRedRevert(10)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseRedRevert(10)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseRedRevert(10)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseRedRevert(10)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseRedRevert(10)}
OID-IRI notation
  • /1/3/6/1/4/1/1206/4/2/1/1/2/1/10
  • /ISO/Identified-Organization/6/1/4/1/1206/4/2/1/1/2/1/10
  • /ISO/3/6/1/4/1/1206/4/2/1/1/2/1/10
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/1206/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseRedRevert
  • /iso/identified-organization/dod/internet/private/enterprise/nema/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseRedRevert
  • /iso/identified-organization/dod/internet/private/enterprises/1206/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseRedRevert
  • /iso/identified-organization/dod/internet/private/enterprises/nema/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseRedRevert
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/1206/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseRedRevert
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/nema/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseRedRevert
  • /iso/identified-organization/dod/internet/private/vendor-objects/1206/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseRedRevert
  • /iso/identified-organization/dod/internet/private/vendor-objects/nema/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseRedRevert
  • /iso/org/dod/internet/private/enterprise/1206/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseRedRevert
  • /iso/org/dod/internet/private/enterprise/nema/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseRedRevert
  • /iso/org/dod/internet/private/enterprises/1206/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseRedRevert
  • /iso/org/dod/internet/private/enterprises/nema/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseRedRevert
  • /iso/org/dod/internet/private/ldap-enterprise/1206/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseRedRevert
  • /iso/org/dod/internet/private/ldap-enterprise/nema/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseRedRevert
  • /iso/org/dod/internet/private/vendor-objects/1206/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseRedRevert
  • /iso/org/dod/internet/private/vendor-objects/nema/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseRedRevert
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
optional, mandatory

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — NTCIP published standard MIB annexes (reviewed modules)

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
optional
Allowed ranges
0–255

Variant 2 — NTCIP published standard MIB annexes (reviewed modules)

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
mandatory
Allowed ranges
0–255

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In NTCIP1202-v03, the row index phaseNumber is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.1206.4.2.1.1.2.1.10.<phaseNumber>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.1206.4.2.1.1.2.1.10

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 4 distinct definitions; some records may not include a definition.

Show 4 published definitions

phaseRedRevert · optional

phaseRedRevert OBJECT-TYPE
         SYNTAX INTEGER (0..255)
         ACCESS read-write
         STATUS optional
         DESCRIPTION
             "Red revert time parameter in tenth seconds . A minimum Red indication to be timed
             following the Yellow Change interval and prior to the next display of Green on the same
             signal output driver group.
             The unitRedRevert parameter shall act as a minimum red revert time for all signal displays.
             The phaseRedRevert parameter may increase the red revert time for a specific phase. If the
             phaseRedRevert parameter is less than the unitRedRevert the unitRedRevert time shall be
             used."
::= { phaseEntry 10 }

phaseRedRevert · mandatory

phaseRedRevert OBJECT-TYPE
      SYNTAX INTEGER (0..255)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION "<Definition> Red revert time parameter in tenth seconds. A
            minimum Red indication to be timed following the Yellow Change
            interval and prior to the next display of Green on the same
            signal output driver group.
            The unitRedRevert parameter shall act as a minimum red revert
            time for all signal displays. The phaseRedRevert parameter may
            increase the red revert time for a specific phase. If the
            phaseRedRevert parameter is less than the unitRedRevert the
            unitRedRevert time shall be used.
      <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.10
      <Unit> tenth second"
::= { phaseEntry 10 }

phaseRedRevert · optional

phaseRedRevert OBJECT-TYPE
   SYNTAX   INTEGER (0..255)
   ACCESS   read-write
   STATUS   optional
   DESCRIPTION
      "<Definition> Red revert time parameter in tenth
       seconds . A minimum Red indication to be timed
       following the Yellow Change interval and prior to
       the next display of Green on the same signal output
       driver group.

        The unitRedRevert parameter shall act as a minimum
        red revert time for all signal displays. The
        phaseRedRevert parameter may increase the red revert
        time for a specific phase. If the phaseRedRevert
        parameter is less than the unitRedRevert the
        unitRedRevert time shall be used.


                                                                                         

                      
       

       <DescriptiveName> NTCIP-1202::ASC.phaseRedRevert
       <DataConceptType> Data Element
       <Unit> tenth second"
::= { phaseEntry 10 }

phaseRedRevert · mandatory

phaseRedRevert OBJECT-TYPE
      SYNTAX INTEGER (0..255)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION "<Definition> Red revert time parameter in tenth seconds. A
            minimum Red indication to be timed following the Yellow Change
            interval and prior to the next display of Green on the same
            signal output driver group.
            The unitRedRevert parameter shall act as a minimum red revert
            time for all signal displays. The phaseRedRevert parameter may
            increase the red revert time for a specific phase. If the
            phaseRedRevert parameter is less than the unitRedRevert the
            unitRedRevert time shall be used.
      <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.10
      <Object Type> P
      <Unit> tenth second"
::= { phaseEntry 10 }

Meaning

Descriptions

4 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

Red revert time parameter in tenth seconds . A minimum Red indication to be timed following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. The unitRedRevert parameter shall act as a minimum red revert time for all signal displays. The phaseRedRevert parameter may increase the red revert time for a specific phase. If the phaseRedRevert parameter is less than the unitRedRevert the unitRedRevert time shall be used.

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 2

<Definition> Red revert time parameter in tenth seconds. A minimum Red indication to be timed following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. The unitRedRevert parameter shall act as a minimum red revert time for all signal displays. The phaseRedRevert parameter may increase the red revert time for a specific phase. If the phaseRedRevert parameter is less than the unitRedRevert the unitRedRevert time shall be used. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.10 <Unit> tenth second

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 3

<Definition> Red revert time parameter in tenth seconds . A minimum Red indication to be timed following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. The unitRedRevert parameter shall act as a minimum red revert time for all signal displays. The phaseRedRevert parameter may increase the red revert time for a specific phase. If the phaseRedRevert parameter is less than the unitRedRevert the unitRedRevert time shall be used. <DescriptiveName> NTCIP-1202::ASC.phaseRedRevert <DataConceptType> Data Element <Unit> tenth second

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 4

<Definition> Red revert time parameter in tenth seconds. A minimum Red indication to be timed following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. The unitRedRevert parameter shall act as a minimum red revert time for all signal displays. The phaseRedRevert parameter may increase the red revert time for a specific phase. If the phaseRedRevert parameter is less than the unitRedRevert the unitRedRevert time shall be used. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.10 <Object Type> P <Unit> tenth second

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Evidence

Source records

4 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 1

phaseRedRevert · optionalNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: optional.

Names: phaseRedRevert

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "phaseRedRevert",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "optional",
    "DESCRIPTION",
    "\"Red revert time parameter in tenth seconds . A minimum Red indication to be timed following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. The unitRedRevert parameter shall act as a minimum red revert time for all signal displays. The phaseRedRevert parameter may increase the red revert time for a specific phase. If the phaseRedRevert parameter is less than the unitRedRevert the unitRedRevert time shall be used.\"",
    "::=",
    "{",
    "phaseEntry",
    "10",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "optional"
    ],
    [
      "DESCRIPTION",
      "Red revert time parameter in tenth seconds . A minimum Red indication to be timed following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. The unitRedRevert parameter shall act as a minimum red revert time for all signal displays. The phaseRedRevert parameter may increase the red revert time for a specific phase. If the phaseRedRevert parameter is less than the unitRedRevert the unitRedRevert time shall be used."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 2NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 2

phaseRedRevert · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: phaseRedRevert

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "phaseRedRevert",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> Red revert time parameter in tenth seconds. A minimum Red indication to be timed following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. The unitRedRevert parameter shall act as a minimum red revert time for all signal displays. The phaseRedRevert parameter may increase the red revert time for a specific phase. If the phaseRedRevert parameter is less than the unitRedRevert the unitRedRevert time shall be used. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.10 <Unit> tenth second\"",
    "::=",
    "{",
    "phaseEntry",
    "10",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> Red revert time parameter in tenth seconds. A minimum Red indication to be timed following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. The unitRedRevert parameter shall act as a minimum red revert time for all signal displays. The phaseRedRevert parameter may increase the red revert time for a specific phase. If the phaseRedRevert parameter is less than the unitRedRevert the unitRedRevert time shall be used. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.10 <Unit> tenth second"
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 3NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 3

phaseRedRevert · optionalNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: optional.

Names: phaseRedRevert

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "phaseRedRevert",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "optional",
    "DESCRIPTION",
    "\"<Definition> Red revert time parameter in tenth seconds . A minimum Red indication to be timed following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. The unitRedRevert parameter shall act as a minimum red revert time for all signal displays. The phaseRedRevert parameter may increase the red revert time for a specific phase. If the phaseRedRevert parameter is less than the unitRedRevert the unitRedRevert time shall be used. <DescriptiveName> NTCIP-1202::ASC.phaseRedRevert <DataConceptType> Data Element <Unit> tenth second\"",
    "::=",
    "{",
    "phaseEntry",
    "10",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "optional"
    ],
    [
      "DESCRIPTION",
      "<Definition> Red revert time parameter in tenth seconds . A minimum Red indication to be timed following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. The unitRedRevert parameter shall act as a minimum red revert time for all signal displays. The phaseRedRevert parameter may increase the red revert time for a specific phase. If the phaseRedRevert parameter is less than the unitRedRevert the unitRedRevert time shall be used. <DescriptiveName> NTCIP-1202::ASC.phaseRedRevert <DataConceptType> Data Element <Unit> tenth second"
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 4NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 4

phaseRedRevert · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: phaseRedRevert

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "phaseRedRevert",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> Red revert time parameter in tenth seconds. A minimum Red indication to be timed following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. The unitRedRevert parameter shall act as a minimum red revert time for all signal displays. The phaseRedRevert parameter may increase the red revert time for a specific phase. If the phaseRedRevert parameter is less than the unitRedRevert the unitRedRevert time shall be used. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.10 <Object Type> P <Unit> tenth second\"",
    "::=",
    "{",
    "phaseEntry",
    "10",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> Red revert time parameter in tenth seconds. A minimum Red indication to be timed following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. The unitRedRevert parameter shall act as a minimum red revert time for all signal displays. The phaseRedRevert parameter may increase the red revert time for a specific phase. If the phaseRedRevert parameter is less than the unitRedRevert the unitRedRevert time shall be used. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.10 <Object Type> P <Unit> tenth second"
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.1206)

Schopp Bruce J.

Siblings (33)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.1206.4.2.1.1.2.1.1 phaseNumber00
1.3.6.1.4.1.1206.4.2.1.1.2.1.2 phaseWalk00
1.3.6.1.4.1.1206.4.2.1.1.2.1.3 phasePedestrianClear00
1.3.6.1.4.1.1206.4.2.1.1.2.1.4 phaseMinimumGreen00
1.3.6.1.4.1.1206.4.2.1.1.2.1.5 phasePassage00
1.3.6.1.4.1.1206.4.2.1.1.2.1.6 phaseMaximum100
1.3.6.1.4.1.1206.4.2.1.1.2.1.7 phaseMaximum200
1.3.6.1.4.1.1206.4.2.1.1.2.1.8 phaseYellowChange00
1.3.6.1.4.1.1206.4.2.1.1.2.1.9 phaseRedClear00
1.3.6.1.4.1.1206.4.2.1.1.2.1.11 phaseAddedInitial00
1.3.6.1.4.1.1206.4.2.1.1.2.1.12 phaseMaximumInitial00
1.3.6.1.4.1.1206.4.2.1.1.2.1.13 phaseTimeBeforeReduction00
1.3.6.1.4.1.1206.4.2.1.1.2.1.14 phaseCarsBeforeReduction00
1.3.6.1.4.1.1206.4.2.1.1.2.1.15 phaseTimeToReduce00
1.3.6.1.4.1.1206.4.2.1.1.2.1.16 phaseReduceBy00
1.3.6.1.4.1.1206.4.2.1.1.2.1.17 phaseMinimumGap00
1.3.6.1.4.1.1206.4.2.1.1.2.1.18 phaseDynamicMaxLimit00
1.3.6.1.4.1.1206.4.2.1.1.2.1.19 phaseDynamicMaxStep00
1.3.6.1.4.1.1206.4.2.1.1.2.1.20 phaseStartup00
1.3.6.1.4.1.1206.4.2.1.1.2.1.21 phaseOptions00
1.3.6.1.4.1.1206.4.2.1.1.2.1.22 phaseRing00
1.3.6.1.4.1.1206.4.2.1.1.2.1.23 phaseConcurrency00
1.3.6.1.4.1.1206.4.2.1.1.2.1.24 phaseMaximum300
1.3.6.1.4.1.1206.4.2.1.1.2.1.25 phaseYellowandRedChangeTimeBeforeEndPedClear00
1.3.6.1.4.1.1206.4.2.1.1.2.1.26 phasePedWalkService00
1.3.6.1.4.1.1206.4.2.1.1.2.1.27 phaseDontWalkRevert00
1.3.6.1.4.1.1206.4.2.1.1.2.1.28 phasePedAlternateClearance00
1.3.6.1.4.1.1206.4.2.1.1.2.1.29 phasePedAlternateWalk00
1.3.6.1.4.1.1206.4.2.1.1.2.1.30 phasePedAdvanceWalkTime00
1.3.6.1.4.1.1206.4.2.1.1.2.1.31 phasePedDelayTime00
1.3.6.1.4.1.1206.4.2.1.1.2.1.32 phaseAdvWarnGrnStartTime00
1.3.6.1.4.1.1206.4.2.1.1.2.1.33 phaseAdvWarnRedStartTime00
1.3.6.1.4.1.1206.4.2.1.1.2.1.34 phaseAltMinTimeTransition00