OID reference

phaseDynamicMaxLimit

1.3.6.1.4.1.1206.4.2.1.1.2.1.18

Description

<Definition> This object shall determine either the upper or lower limit of the running max in seconds (0-255 sec) during dynamic max operation. The normal maximum (i.e. Max1, Max2, etc.) shall determine the other limit as follows: When dynamicMaxLimit is larger than the normal maximum, it shall become the upper limit…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.1206.4.2.1.1.2.1 (phaseEntry)
Node code
18
Node name
phaseDynamicMaxLimit
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.1206.4.2.1.1.2.1.18
URN notation
urn:oid:1.3.6.1.4.1.1206.4.2.1.1.2.1.18
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 1206 4 2 1 1 2 1 18}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseDynamicMaxLimit(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseDynamicMaxLimit(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseDynamicMaxLimit(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseDynamicMaxLimit(18)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseDynamicMaxLimit(18)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseDynamicMaxLimit(18)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseDynamicMaxLimit(18)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseDynamicMaxLimit(18)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseDynamicMaxLimit(18)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseDynamicMaxLimit(18)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseDynamicMaxLimit(18)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseDynamicMaxLimit(18)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseDynamicMaxLimit(18)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseDynamicMaxLimit(18)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseDynamicMaxLimit(18)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) phase(1) phaseTable(2) phaseEntry(1) phaseDynamicMaxLimit(18)}
OID-IRI notation
  • /1/3/6/1/4/1/1206/4/2/1/1/2/1/18
  • /ISO/Identified-Organization/6/1/4/1/1206/4/2/1/1/2/1/18
  • /ISO/3/6/1/4/1/1206/4/2/1/1/2/1/18
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/1206/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseDynamicMaxLimit
  • /iso/identified-organization/dod/internet/private/enterprise/nema/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseDynamicMaxLimit
  • /iso/identified-organization/dod/internet/private/enterprises/1206/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseDynamicMaxLimit
  • /iso/identified-organization/dod/internet/private/enterprises/nema/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseDynamicMaxLimit
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/1206/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseDynamicMaxLimit
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/nema/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseDynamicMaxLimit
  • /iso/identified-organization/dod/internet/private/vendor-objects/1206/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseDynamicMaxLimit
  • /iso/identified-organization/dod/internet/private/vendor-objects/nema/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseDynamicMaxLimit
  • /iso/org/dod/internet/private/enterprise/1206/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseDynamicMaxLimit
  • /iso/org/dod/internet/private/enterprise/nema/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseDynamicMaxLimit
  • /iso/org/dod/internet/private/enterprises/1206/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseDynamicMaxLimit
  • /iso/org/dod/internet/private/enterprises/nema/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseDynamicMaxLimit
  • /iso/org/dod/internet/private/ldap-enterprise/1206/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseDynamicMaxLimit
  • /iso/org/dod/internet/private/ldap-enterprise/nema/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseDynamicMaxLimit
  • /iso/org/dod/internet/private/vendor-objects/1206/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseDynamicMaxLimit
  • /iso/org/dod/internet/private/vendor-objects/nema/transportation/devices/asc/phase/phaseTable/phaseEntry/phaseDynamicMaxLimit
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
mandatory, optional

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — NTCIP published standard MIB annexes (reviewed modules)

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
mandatory
Allowed ranges
0–255

Variant 2 — NTCIP published standard MIB annexes (reviewed modules)

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
optional
Allowed ranges
0–255

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In NTCIP1202-v03, the row index phaseNumber is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.1206.4.2.1.1.2.1.18.<phaseNumber>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.1206.4.2.1.1.2.1.18

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 4 distinct definitions; some records may not include a definition.

Show 4 published definitions

phaseDynamicMaxLimit · mandatory

phaseDynamicMaxLimit   OBJECT-TYPE
      SYNTAX INTEGER (0..255)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION "<Definition> This object shall determine either the upper
            or lower limit of the running max in seconds (0-255 sec) during
            dynamic max operation. The normal maximum (i.e. Max1, Max2, etc.)
            shall determine the other limit as follows:
            When dynamicMaxLimit is larger than the normal maximum, it shall
            become the upper limit.

               When dynamicMaxLimit is smaller than the normal maximum, it shall
               become the lower limit.




                                                                                           

                  
        

                 Setting dynamicMaxLimit greater than zero enables dynamic max
                 operation with the normal maximum used as the initial maximum
                 setting. See dynamicMaxStep for details on dynamic max operation.

            Maximum recall or a failed detector that is assigned to the
            associated phase shall disable dynamic max operation for the
            phase.
      <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.18
      <Unit> second"
::= { phaseEntry 18 }

phaseDynamicMaxLimit · optional

phaseDynamicMaxLimit OBJECT-TYPE
      SYNTAX INTEGER (0..255)
      ACCESS read-write
      STATUS optional
      DESCRIPTION
          "This object shall determine either the upper or lower limit of the running max in seconds (0-
          255) during dynamic max operation.
          The normal maximum (i.e. Max1, Max2, etc.) shall determine the other limit as follows:
             When dynamicMaxLimit is larger than the normal maximum, it shall become the upper
             limit.
             When dynamicMaxLimit is smaller than the normal maximum, it shall become the lower
             limit.

TS 3.5-1996
       

             Setting dynamicMaxLimit greater than zero enables dynamic max operation with the normal
             maximum used as the initial maximum setting. See dynamicMaxStep for details on dynamic
             max operation.
             Maximum recall or a failed detector that is assigned to the associated phase shall disable
             dynamic max operation for the phase."
::= { phaseEntry 18 }

phaseDynamicMaxLimit · optional

phaseDynamicMaxLimit   OBJECT-TYPE
   SYNTAX   INTEGER (0..255)
   ACCESS   read-write
   STATUS   optional
   DESCRIPTION
      "<Definition> This object shall determine either the
       upper or lower limit of the running max in seconds
       (0-255 sec) during dynamic max operation.

          The normal maximum (i.e. Max1, Max2, etc.) shall
          determine the other limit as follows:

          When dynamicMaxLimit is larger than the normal



                                                                                       

                                                                                       
                                                                                      

        maximum, it shall become the upper limit.

        When dynamicMaxLimit is smaller than the normal
        maximum, it shall become the lower limit.

        Setting dynamicMaxLimit greater than zero enables
        dynamic max operation with the normal maximum used
        as the initial maximum setting. See dynamicMaxStep
        for details on dynamic max operation.

       Maximum recall or a failed detector that is assigned
       to the associated phase shall disable dynamic max
       operation for the phase.
       <DescriptiveName> NTCIP-1202::ASC.phaseDynamicMaxLimit
       <DataConceptType> Data Element
       <Unit> second"
::= { phaseEntry 18 }

phaseDynamicMaxLimit · mandatory

phaseDynamicMaxLimit   OBJECT-TYPE
      SYNTAX INTEGER (0..255)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION "<Definition> This object shall determine either the upper
            or lower limit of the running max in seconds (0-255 sec) during
            dynamic max operation. The normal maximum (i.e. Max1, Max2, etc.)
            shall determine the other limit as follows:
            When dynamicMaxLimit is larger than the normal maximum, it shall
            become the upper limit.

                 When dynamicMaxLimit is smaller than the normal maximum, it shall
                 become the lower limit.

                 Setting dynamicMaxLimit greater than zero enables dynamic max
                 operation with the normal maximum used as the initial maximum
                 setting. See dynamicMaxStep for details on dynamic max operation.

            Maximum recall or a failed detector that is assigned to the
            associated phase shall disable dynamic max operation for the
            phase.
      <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.18
      <Object Type> P
      <Unit> second"
::= { phaseEntry 18 }

Meaning

Descriptions

4 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

<Definition> This object shall determine either the upper or lower limit of the running max in seconds (0-255 sec) during dynamic max operation. The normal maximum (i.e. Max1, Max2, etc.) shall determine the other limit as follows: When dynamicMaxLimit is larger than the normal maximum, it shall become the upper limit. When dynamicMaxLimit is smaller than the normal maximum, it shall become the lower limit. Setting dynamicMaxLimit greater than zero enables dynamic max operation with the normal maximum used as the initial maximum setting. See dynamicMaxStep for details on dynamic max operation. Maximum recall or a failed detector that is assigned to the associated phase shall disable dynamic max operation for the phase. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.18 <Unit> second

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 2

This object shall determine either the upper or lower limit of the running max in seconds (0- 255) during dynamic max operation. The normal maximum (i.e. Max1, Max2, etc.) shall determine the other limit as follows: When dynamicMaxLimit is larger than the normal maximum, it shall become the upper limit. When dynamicMaxLimit is smaller than the normal maximum, it shall become the lower limit. TS 3.5-1996 Setting dynamicMaxLimit greater than zero enables dynamic max operation with the normal maximum used as the initial maximum setting. See dynamicMaxStep for details on dynamic max operation. Maximum recall or a failed detector that is assigned to the associated phase shall disable dynamic max operation for the phase.

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 3

<Definition> This object shall determine either the upper or lower limit of the running max in seconds (0-255 sec) during dynamic max operation. The normal maximum (i.e. Max1, Max2, etc.) shall determine the other limit as follows: When dynamicMaxLimit is larger than the normal maximum, it shall become the upper limit. When dynamicMaxLimit is smaller than the normal maximum, it shall become the lower limit. Setting dynamicMaxLimit greater than zero enables dynamic max operation with the normal maximum used as the initial maximum setting. See dynamicMaxStep for details on dynamic max operation. Maximum recall or a failed detector that is assigned to the associated phase shall disable dynamic max operation for the phase. <DescriptiveName> NTCIP-1202::ASC.phaseDynamicMaxLimit <DataConceptType> Data Element <Unit> second

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 4

<Definition> This object shall determine either the upper or lower limit of the running max in seconds (0-255 sec) during dynamic max operation. The normal maximum (i.e. Max1, Max2, etc.) shall determine the other limit as follows: When dynamicMaxLimit is larger than the normal maximum, it shall become the upper limit. When dynamicMaxLimit is smaller than the normal maximum, it shall become the lower limit. Setting dynamicMaxLimit greater than zero enables dynamic max operation with the normal maximum used as the initial maximum setting. See dynamicMaxStep for details on dynamic max operation. Maximum recall or a failed detector that is assigned to the associated phase shall disable dynamic max operation for the phase. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.18 <Object Type> P <Unit> second

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Evidence

Source records

4 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 1

phaseDynamicMaxLimit · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: phaseDynamicMaxLimit

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "phaseDynamicMaxLimit",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> This object shall determine either the upper or lower limit of the running max in seconds (0-255 sec) during dynamic max operation. The normal maximum (i.e. Max1, Max2, etc.) shall determine the other limit as follows: When dynamicMaxLimit is larger than the normal maximum, it shall become the upper limit. When dynamicMaxLimit is smaller than the normal maximum, it shall become the lower limit. Setting dynamicMaxLimit greater than zero enables dynamic max operation with the normal maximum used as the initial maximum setting. See dynamicMaxStep for details on dynamic max operation. Maximum recall or a failed detector that is assigned to the associated phase shall disable dynamic max operation for the phase. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.18 <Unit> second\"",
    "::=",
    "{",
    "phaseEntry",
    "18",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> This object shall determine either the upper or lower limit of the running max in seconds (0-255 sec) during dynamic max operation. The normal maximum (i.e. Max1, Max2, etc.) shall determine the other limit as follows: When dynamicMaxLimit is larger than the normal maximum, it shall become the upper limit. When dynamicMaxLimit is smaller than the normal maximum, it shall become the lower limit. Setting dynamicMaxLimit greater than zero enables dynamic max operation with the normal maximum used as the initial maximum setting. See dynamicMaxStep for details on dynamic max operation. Maximum recall or a failed detector that is assigned to the associated phase shall disable dynamic max operation for the phase. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.18 <Unit> second"
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 2NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 2

phaseDynamicMaxLimit · optionalNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: optional.

Names: phaseDynamicMaxLimit

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "phaseDynamicMaxLimit",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "optional",
    "DESCRIPTION",
    "\"This object shall determine either the upper or lower limit of the running max in seconds (0- 255) during dynamic max operation. The normal maximum (i.e. Max1, Max2, etc.) shall determine the other limit as follows: When dynamicMaxLimit is larger than the normal maximum, it shall become the upper limit. When dynamicMaxLimit is smaller than the normal maximum, it shall become the lower limit. TS 3.5-1996 Setting dynamicMaxLimit greater than zero enables dynamic max operation with the normal maximum used as the initial maximum setting. See dynamicMaxStep for details on dynamic max operation. Maximum recall or a failed detector that is assigned to the associated phase shall disable dynamic max operation for the phase.\"",
    "::=",
    "{",
    "phaseEntry",
    "18",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "optional"
    ],
    [
      "DESCRIPTION",
      "This object shall determine either the upper or lower limit of the running max in seconds (0- 255) during dynamic max operation. The normal maximum (i.e. Max1, Max2, etc.) shall determine the other limit as follows: When dynamicMaxLimit is larger than the normal maximum, it shall become the upper limit. When dynamicMaxLimit is smaller than the normal maximum, it shall become the lower limit. TS 3.5-1996 Setting dynamicMaxLimit greater than zero enables dynamic max operation with the normal maximum used as the initial maximum setting. See dynamicMaxStep for details on dynamic max operation. Maximum recall or a failed detector that is assigned to the associated phase shall disable dynamic max operation for the phase."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 3NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 3

phaseDynamicMaxLimit · optionalNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: optional.

Names: phaseDynamicMaxLimit

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "phaseDynamicMaxLimit",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "optional",
    "DESCRIPTION",
    "\"<Definition> This object shall determine either the upper or lower limit of the running max in seconds (0-255 sec) during dynamic max operation. The normal maximum (i.e. Max1, Max2, etc.) shall determine the other limit as follows: When dynamicMaxLimit is larger than the normal maximum, it shall become the upper limit. When dynamicMaxLimit is smaller than the normal maximum, it shall become the lower limit. Setting dynamicMaxLimit greater than zero enables dynamic max operation with the normal maximum used as the initial maximum setting. See dynamicMaxStep for details on dynamic max operation. Maximum recall or a failed detector that is assigned to the associated phase shall disable dynamic max operation for the phase. <DescriptiveName> NTCIP-1202::ASC.phaseDynamicMaxLimit <DataConceptType> Data Element <Unit> second\"",
    "::=",
    "{",
    "phaseEntry",
    "18",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "optional"
    ],
    [
      "DESCRIPTION",
      "<Definition> This object shall determine either the upper or lower limit of the running max in seconds (0-255 sec) during dynamic max operation. The normal maximum (i.e. Max1, Max2, etc.) shall determine the other limit as follows: When dynamicMaxLimit is larger than the normal maximum, it shall become the upper limit. When dynamicMaxLimit is smaller than the normal maximum, it shall become the lower limit. Setting dynamicMaxLimit greater than zero enables dynamic max operation with the normal maximum used as the initial maximum setting. See dynamicMaxStep for details on dynamic max operation. Maximum recall or a failed detector that is assigned to the associated phase shall disable dynamic max operation for the phase. <DescriptiveName> NTCIP-1202::ASC.phaseDynamicMaxLimit <DataConceptType> Data Element <Unit> second"
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 4NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 4

phaseDynamicMaxLimit · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: phaseDynamicMaxLimit

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "phaseDynamicMaxLimit",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> This object shall determine either the upper or lower limit of the running max in seconds (0-255 sec) during dynamic max operation. The normal maximum (i.e. Max1, Max2, etc.) shall determine the other limit as follows: When dynamicMaxLimit is larger than the normal maximum, it shall become the upper limit. When dynamicMaxLimit is smaller than the normal maximum, it shall become the lower limit. Setting dynamicMaxLimit greater than zero enables dynamic max operation with the normal maximum used as the initial maximum setting. See dynamicMaxStep for details on dynamic max operation. Maximum recall or a failed detector that is assigned to the associated phase shall disable dynamic max operation for the phase. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.18 <Object Type> P <Unit> second\"",
    "::=",
    "{",
    "phaseEntry",
    "18",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> This object shall determine either the upper or lower limit of the running max in seconds (0-255 sec) during dynamic max operation. The normal maximum (i.e. Max1, Max2, etc.) shall determine the other limit as follows: When dynamicMaxLimit is larger than the normal maximum, it shall become the upper limit. When dynamicMaxLimit is smaller than the normal maximum, it shall become the lower limit. Setting dynamicMaxLimit greater than zero enables dynamic max operation with the normal maximum used as the initial maximum setting. See dynamicMaxStep for details on dynamic max operation. Maximum recall or a failed detector that is assigned to the associated phase shall disable dynamic max operation for the phase. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.18 <Object Type> P <Unit> second"
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.1206)

Schopp Bruce J.

Siblings (33)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.1206.4.2.1.1.2.1.1 phaseNumber00
1.3.6.1.4.1.1206.4.2.1.1.2.1.2 phaseWalk00
1.3.6.1.4.1.1206.4.2.1.1.2.1.3 phasePedestrianClear00
1.3.6.1.4.1.1206.4.2.1.1.2.1.4 phaseMinimumGreen00
1.3.6.1.4.1.1206.4.2.1.1.2.1.5 phasePassage00
1.3.6.1.4.1.1206.4.2.1.1.2.1.6 phaseMaximum100
1.3.6.1.4.1.1206.4.2.1.1.2.1.7 phaseMaximum200
1.3.6.1.4.1.1206.4.2.1.1.2.1.8 phaseYellowChange00
1.3.6.1.4.1.1206.4.2.1.1.2.1.9 phaseRedClear00
1.3.6.1.4.1.1206.4.2.1.1.2.1.10 phaseRedRevert00
1.3.6.1.4.1.1206.4.2.1.1.2.1.11 phaseAddedInitial00
1.3.6.1.4.1.1206.4.2.1.1.2.1.12 phaseMaximumInitial00
1.3.6.1.4.1.1206.4.2.1.1.2.1.13 phaseTimeBeforeReduction00
1.3.6.1.4.1.1206.4.2.1.1.2.1.14 phaseCarsBeforeReduction00
1.3.6.1.4.1.1206.4.2.1.1.2.1.15 phaseTimeToReduce00
1.3.6.1.4.1.1206.4.2.1.1.2.1.16 phaseReduceBy00
1.3.6.1.4.1.1206.4.2.1.1.2.1.17 phaseMinimumGap00
1.3.6.1.4.1.1206.4.2.1.1.2.1.19 phaseDynamicMaxStep00
1.3.6.1.4.1.1206.4.2.1.1.2.1.20 phaseStartup00
1.3.6.1.4.1.1206.4.2.1.1.2.1.21 phaseOptions00
1.3.6.1.4.1.1206.4.2.1.1.2.1.22 phaseRing00
1.3.6.1.4.1.1206.4.2.1.1.2.1.23 phaseConcurrency00
1.3.6.1.4.1.1206.4.2.1.1.2.1.24 phaseMaximum300
1.3.6.1.4.1.1206.4.2.1.1.2.1.25 phaseYellowandRedChangeTimeBeforeEndPedClear00
1.3.6.1.4.1.1206.4.2.1.1.2.1.26 phasePedWalkService00
1.3.6.1.4.1.1206.4.2.1.1.2.1.27 phaseDontWalkRevert00
1.3.6.1.4.1.1206.4.2.1.1.2.1.28 phasePedAlternateClearance00
1.3.6.1.4.1.1206.4.2.1.1.2.1.29 phasePedAlternateWalk00
1.3.6.1.4.1.1206.4.2.1.1.2.1.30 phasePedAdvanceWalkTime00
1.3.6.1.4.1.1206.4.2.1.1.2.1.31 phasePedDelayTime00
1.3.6.1.4.1.1206.4.2.1.1.2.1.32 phaseAdvWarnGrnStartTime00
1.3.6.1.4.1.1206.4.2.1.1.2.1.33 phaseAdvWarnRedStartTime00
1.3.6.1.4.1.1206.4.2.1.1.2.1.34 phaseAltMinTimeTransition00