Status in source: optional.
Names: phaseOptions
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"phaseOptions",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"65535",
")",
"ACCESS",
"read-write",
"STATUS",
"optional",
"DESCRIPTION",
"\"<Definition> Optional phase functions ( 0 = False/ Disabled, 1 = True/Enabled) Bit 15: AddedInitialCalculation - If set (1) the CU shall compare counts from all associated AddedInitial detectors and use the largest count value for the calculations. If clear (0) the CU shall sum all associated AddedInitial detector counts and use this sum for the calculations. The ability to modify the setting of this bit is optional. Bit 14: Conditional Service Enable - in multi-ring configurations when set to 1 causes a gapped/maxed phase to conditionally service a preceding actuated vehicle phase when sufficient time remains before max time out of the phase(s) not prepared to terminate. Support is optional. REFERENCE NEMA TS 2 Clause 3.5.3.9 Bit 13: Actuated Rest In Walk - when set to 1 causes an actuated phase to rest in Walk when there is no serviceable conflicting call at the end of Walk Timing. Bit 12: Guaranteed Passage - when set to 1 enables an actuated phase operating in volume density mode (using gap reduction) to retain the right of way for the unexpired portion of the Passage time following the decision to terminate the green due to a reduced gap. Support is optional Bit 11: Simultaneous Gap Disable - in multi-ring configurations when set to 1 disables a gapped out phase from reverting to the extensible portion. Support is optional REFERENCE NEMA TS 2 Clause 3.5.5.3 Bit 10: Dual Entry Phase - in multi-ring configurations when set to 1 causes the phase to become active upon entry into a concurrency group (crossing a barrier) when no calls exist in its ring within its concurrency group. REFERENCE NEMA TS 2 Clause 3.5.5.3 Bit 9: Soft Vehicle Recall - when set to 1 causes a call on a phase when all conflicting phases are in green dwell or red dwell and there are no serviceable conflicting calls. Support is optional. Bit 8: Ped. Recall - when set to 1 causes a recurring pedestrian demand which shall function in the same manner as an external pedestrian call except that it shall not recycle the pedestrian service until a conflicting phase is serviced REFERENCE NEMA TS 2 Clause 3.5.3.7 Bit 7: Max Vehicle Recall - when set to 1 causes a call on a phase such that the timing of the Green interval for that phase shall be extended to Maximum Green time. REFERENCE NEMA TS 2 Clause 3.5.3.5 Bit 6: Min. Vehicle Recall - when set to 1 causes recurring demand for vehicle service on the phase when that phase is not in its Green interval. REFERENCE NEMA TS 2 Clause 3.5.3.6 Bit 5: Non Lock Detector Memory - when set to 0 will cause the call to be locked at the beginning of the yellow interval. When set to 1 call locking will depend on the detectorOptions object. REFERENCE NEMA TS 2 Clause 3.5.3.4 Bit 4: Non-Actuated 2 - when set to 1 causes a phase to respond to the Call To Non-Actuated 2 input (if present) or other method. Support is optional REFERENCE NEMA TS 2 Clause 3.5.5.5.8 Bit 3: Non-Actuated 1 - when set to 1 causes a phase to respond to the Call To Non-Actuated 1 input (if present) or other method. Support is optional REFERENCE NEMA TS 2 Clause 3.5.5.5.8 Bit 2: Automatic Flash Exit Phase - The CU shall move immediately to the beginning of the phase(s) programmed as Exit Phase(s) when Automatic Flash terminates. Support is optional REFERENCE NEMA TS 2 Clause 3.9.1.2.1 Bit 1: Automatic Flash Entry Phase - When Automatic Flash is called, the CU shall service the Entry Phase(s), clear to an All Red, then initiate flashing operation. Support is optional. REFERENCE NEMA TS 2 Clause 3.9.1.2.1 Bit 0: Enabled Phase - provide a means to define whether this phase is used in the current configuration. A disabled phase shall not provide any outputs nor respond to any phase inputs. The object phaseRing = 0 has the same effect. <DescriptiveName> NTCIP-1202::ASC.phaseOptions <DataConceptType> Data Element\"",
"::=",
"{",
"phaseEntry",
"21",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
65535
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"optional"
],
[
"DESCRIPTION",
"<Definition> Optional phase functions ( 0 = False/ Disabled, 1 = True/Enabled) Bit 15: AddedInitialCalculation - If set (1) the CU shall compare counts from all associated AddedInitial detectors and use the largest count value for the calculations. If clear (0) the CU shall sum all associated AddedInitial detector counts and use this sum for the calculations. The ability to modify the setting of this bit is optional. Bit 14: Conditional Service Enable - in multi-ring configurations when set to 1 causes a gapped/maxed phase to conditionally service a preceding actuated vehicle phase when sufficient time remains before max time out of the phase(s) not prepared to terminate. Support is optional. REFERENCE NEMA TS 2 Clause 3.5.3.9 Bit 13: Actuated Rest In Walk - when set to 1 causes an actuated phase to rest in Walk when there is no serviceable conflicting call at the end of Walk Timing. Bit 12: Guaranteed Passage - when set to 1 enables an actuated phase operating in volume density mode (using gap reduction) to retain the right of way for the unexpired portion of the Passage time following the decision to terminate the green due to a reduced gap. Support is optional Bit 11: Simultaneous Gap Disable - in multi-ring configurations when set to 1 disables a gapped out phase from reverting to the extensible portion. Support is optional REFERENCE NEMA TS 2 Clause 3.5.5.3 Bit 10: Dual Entry Phase - in multi-ring configurations when set to 1 causes the phase to become active upon entry into a concurrency group (crossing a barrier) when no calls exist in its ring within its concurrency group. REFERENCE NEMA TS 2 Clause 3.5.5.3 Bit 9: Soft Vehicle Recall - when set to 1 causes a call on a phase when all conflicting phases are in green dwell or red dwell and there are no serviceable conflicting calls. Support is optional. Bit 8: Ped. Recall - when set to 1 causes a recurring pedestrian demand which shall function in the same manner as an external pedestrian call except that it shall not recycle the pedestrian service until a conflicting phase is serviced REFERENCE NEMA TS 2 Clause 3.5.3.7 Bit 7: Max Vehicle Recall - when set to 1 causes a call on a phase such that the timing of the Green interval for that phase shall be extended to Maximum Green time. REFERENCE NEMA TS 2 Clause 3.5.3.5 Bit 6: Min. Vehicle Recall - when set to 1 causes recurring demand for vehicle service on the phase when that phase is not in its Green interval. REFERENCE NEMA TS 2 Clause 3.5.3.6 Bit 5: Non Lock Detector Memory - when set to 0 will cause the call to be locked at the beginning of the yellow interval. When set to 1 call locking will depend on the detectorOptions object. REFERENCE NEMA TS 2 Clause 3.5.3.4 Bit 4: Non-Actuated 2 - when set to 1 causes a phase to respond to the Call To Non-Actuated 2 input (if present) or other method. Support is optional REFERENCE NEMA TS 2 Clause 3.5.5.5.8 Bit 3: Non-Actuated 1 - when set to 1 causes a phase to respond to the Call To Non-Actuated 1 input (if present) or other method. Support is optional REFERENCE NEMA TS 2 Clause 3.5.5.5.8 Bit 2: Automatic Flash Exit Phase - The CU shall move immediately to the beginning of the phase(s) programmed as Exit Phase(s) when Automatic Flash terminates. Support is optional REFERENCE NEMA TS 2 Clause 3.9.1.2.1 Bit 1: Automatic Flash Entry Phase - When Automatic Flash is called, the CU shall service the Entry Phase(s), clear to an All Red, then initiate flashing operation. Support is optional. REFERENCE NEMA TS 2 Clause 3.9.1.2.1 Bit 0: Enabled Phase - provide a means to define whether this phase is used in the current configuration. A disabled phase shall not provide any outputs nor respond to any phase inputs. The object phaseRing = 0 has the same effect. <DescriptiveName> NTCIP-1202::ASC.phaseOptions <DataConceptType> Data Element"
],
null,
null,
null,
null
]
}