phaseWalk

Status in source: mandatory.

Names: phaseWalk

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "phaseWalk",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"Phase Walk Parameter in seconds. This shall control the amount of time the Walk indication shall be displayed.\"",
    "REFERENCE",
    "\"NEMA TS 2 Clause 3.5.3.1 and 3.5.3.2.2.a\"",
    "::=",
    "{",
    "phaseEntry",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "Phase Walk Parameter in seconds. This shall control the amount of time the Walk indication shall be displayed."
    ],
    [
      "REFERENCE",
      "NEMA TS 2 Clause 3.5.3.1 and 3.5.3.2.2.a"
    ],
    null,
    null,
    null
  ]
}

• NTCIP published standard MIB annexes (reviewed modules) · Publisher's source file: NTCIP 1202 v01, Object Definitions for Actuated Traffic Signal Controller (ASC) Units) Published January 2005 (superceded by NTCIP 1202 v02) — original PDF · Official record

  Module: ASC_MIB1

  See published definition above

  Module imports

  {'TMIB': ['devices']}

  Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.

  Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.

  Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: TMIB. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.

  · Download NTCIP1202v0107d.pdf — ASC_MIB1 (MIB transcription)

  Related source files and packages:

  • NTCIP 1202 v01, Object Definitions for Actuated Traffic Signal Controller (ASC) Units) Published January 2005 (superceded by NTCIP 1202 v02) — original PDF
  • NTCIP 8004 v02 (2010) — normative namespace, pages 43–44
  • RFC 1155 — original SMI enterprise namespace

  Show more related files and packages

  • NTCIP8004-NEMA.mib — ITE namespace dependency
  • NTCIP8004-Transportation.mib — ITE namespace dependency

Status in source: mandatory.

Names: phaseWalk

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "phaseWalk",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> Phase Walk Parameter in seconds. This shall control the amount of time the Walk indication shall be displayed. This parameter shall be used regardless whether the pedestrian indication associated with this phase is for a ped- only phase or for a pedestrian indication that runs parallel to a vehicle phase. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.2 <Object Type> P <Unit> second\"",
    "REFERENCE",
    "\"NEMA TS 2 Clause 3.5.3.1 and 3.5.3.2.2.a\"",
    "::=",
    "{",
    "phaseEntry",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> Phase Walk Parameter in seconds. This shall control the amount of time the Walk indication shall be displayed. This parameter shall be used regardless whether the pedestrian indication associated with this phase is for a ped- only phase or for a pedestrian indication that runs parallel to a vehicle phase. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.2 <Object Type> P <Unit> second"
    ],
    [
      "REFERENCE",
      "NEMA TS 2 Clause 3.5.3.1 and 3.5.3.2.2.a"
    ],
    null,
    null,
    null
  ]
}

• NTCIP published standard MIB annexes (reviewed modules) · Publisher's source file: NTCIP 1202 v03b NTCIP 1202 v02, Object Definitions for Actuated Traffic Signal Controller (ASC) Units – version 03b Published October 2023 — original PDF · Official record

  Module: NTCIP1202-v03

  See published definition above

  Module imports

  {'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter', 'null'], 'RFC1213-MIB': ['DisplayString', 'ifIndex'], 'NTCIP8004v02': ['OwnerString', 'OerString', 'devices']}

  Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.

  Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.

  Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.

  · Download NTCIP-1202v03.35e-aspublished.pdf — NTCIP1202-v03 (MIB transcription)

  Related source files and packages:

  • NTCIP 1202 v03b NTCIP 1202 v02, Object Definitions for Actuated Traffic Signal Controller (ASC) Units – version 03b Published October 2023 — original PDF

Status in source: mandatory.

Names: phaseWalk

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "phaseWalk",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> Phase Walk Parameter in seconds. This shall control the amount of time the Walk indication shall be displayed. This parameter shall be used regardless whether the pedestrian indication associated with this phase is for a ped- only phase or for a pedestrian indication that runs parallel to a vehicle phase. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.2 <Unit> second\"",
    "REFERENCE",
    "\"NEMA TS 2 Clause 3.5.3.1 and 3.5.3.2.2.a\"",
    "::=",
    "{",
    "phaseEntry",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> Phase Walk Parameter in seconds. This shall control the amount of time the Walk indication shall be displayed. This parameter shall be used regardless whether the pedestrian indication associated with this phase is for a ped- only phase or for a pedestrian indication that runs parallel to a vehicle phase. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.2.1.2 <Unit> second"
    ],
    [
      "REFERENCE",
      "NEMA TS 2 Clause 3.5.3.1 and 3.5.3.2.2.a"
    ],
    null,
    null,
    null
  ]
}

• NTCIP published standard MIB annexes (reviewed modules) · Publisher's source file: NTCIP 1202 v03A, Object Definitions for Actuated Signal Controllers (ASC) Interface Published May 2019 — original PDF · Official record

  Module: NTCIP1202-v03

  See published definition above

  Module imports

  {'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter', 'null'], 'RFC1213-MIB': ['DisplayString', 'ifIndex'], 'NTCIP8004v02': ['OwnerString', 'OerString', 'devices']}

  Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.

  Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.

  Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.

  · Download NTCIP-1202v0328A.pdf — NTCIP1202-v03 (MIB transcription)

  Related source files and packages:

  • NTCIP 1202 v03A, Object Definitions for Actuated Signal Controllers (ASC) Interface Published May 2019 — original PDF

Status in source: optional.

Names: phaseWalk

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "phaseWalk",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "optional",
    "DESCRIPTION",
    "\"<Definition> Phase Walk Parameter in seconds. This shall control the amountof time the Walk indication shall be displayed. <DescriptiveName> NTCIP-1202::ASC.phaseWalk <DataConceptType> Data Element <Unit> second\"",
    "REFERENCE",
    "\"NEMA TS 2 Clause 3.5.3.1 and 3.5.3.2.2.a\"",
    "::=",
    "{",
    "phaseEntry",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "optional"
    ],
    [
      "DESCRIPTION",
      "<Definition> Phase Walk Parameter in seconds. This shall control the amountof time the Walk indication shall be displayed. <DescriptiveName> NTCIP-1202::ASC.phaseWalk <DataConceptType> Data Element <Unit> second"
    ],
    [
      "REFERENCE",
      "NEMA TS 2 Clause 3.5.3.1 and 3.5.3.2.2.a"
    ],
    null,
    null,
    null
  ]
}

• NTCIP published standard MIB annexes (reviewed modules) · Publisher's source file: NTCIP 1202 v02, Object Definitions for Actuated Traffic Signal Controller (ASC) Units – version 02 Published November 2005 — original PDF · Official record

  Module: NTCIP1202-200x

  See published definition above

  Module imports

  {'TMIB-II': ['OwnerString', 'devices'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['Counter']}

  Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.

  Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: TMIB-II. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.

  · Download NTCIP1202v0219f.pdf — NTCIP1202-200x (MIB transcription)

  Related source files and packages:

  • NTCIP 1202 v02, Object Definitions for Actuated Traffic Signal Controller (ASC) Units – version 02 Published November 2005 — original PDF