Setting this variable to rebootUpsImmediatelyWithOrWithoutAC (2)
causes the UPS to turn off immediately, wait for a minimum time
(typically 8 seconds), and then turn back on regardless of the
AC input power on the UPS. Any supported switched outlet
groups will be turned off immediately but will turn on based
on their individual settings (to allow on sequencing).
Setting this variable to rebootUpsDelayedWithOrWithoutAC (3)
causes the UPS to turn off after a delay period, wait for a
minimum time (typically 8 seconds), and then turn back on
regardless of the AC input power on the UPS. Any supported
switched outlet groups will be turned off and on based on their
individual settings (to allow off and/or on sequencing).
Setting this value to noRebootUpsWithOrWithoutAC (1) has no
effect.
The value noRebootUpsWithOrWithoutAC (1) will always be
returned when the variable is read.
Parsed from file powernet.mib.txt
Company: None
Module: PowerNet-MIB
Setting this variable to rebootUpsImmediatelyWithOrWithoutAC (2)
causes the UPS to turn off immediately, wait for a minimum time
(typically 8 seconds), and then turn back on regardless of the
AC input power on the UPS. Any supported switched outlet
groups will be turned off immediately but will turn on based
on their individual settings (to allow on sequencing).
Setting this variable to rebootUpsDelayedWithOrWithoutAC (3)
causes the UPS to turn off after a delay period, wait for a
minimum time (typically 8 seconds), and then turn back on
regardless of the AC input power on the UPS. Any supported
switched outlet groups will be turned off and on based on their
individual settings (to allow off and/or on sequencing).
Setting this value to noRebootUpsWithOrWithoutAC (1) has no
effect.
The value noRebootUpsWithOrWithoutAC (1) will always be
returned when the variable is read.
Parsed from file PowerNet-MIB.mib
Module: PowerNet-MIB
upsAdvControlRebootUpsWithOrWithoutAC OBJECT-TYPE SYNTAX INTEGER { noRebootUpsWithOrWithoutAC (1), rebootUpsImmediatelyWithOrWithoutAC (2), rebootUpsDelayedWithOrWithoutAC (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this variable to rebootUpsImmediatelyWithOrWithoutAC (2) causes the UPS to turn off immediately, wait for a minimum time (typically 8 seconds), and then turn back on regardless of the AC input power on the UPS. Any supported switched outlet groups will be turned off immediately but will turn on based on their individual settings (to allow on sequencing). Setting this variable to rebootUpsDelayedWithOrWithoutAC (3) causes the UPS to turn off after a delay period, wait for a minimum time (typically 8 seconds), and then turn back on regardless of the AC input power on the UPS. Any supported switched outlet groups will be turned off and on based on their individual settings (to allow off and/or on sequencing). Setting this value to noRebootUpsWithOrWithoutAC (1) has no effect. The value noRebootUpsWithOrWithoutAC (1) will always be returned when the variable is read." ::= { upsAdvControl 8 }
Vendor: American Power Conversion Corp.
Module: PowerNet-MIB
[Automatically extracted from oidview.com]
upsAdvControlRebootUpsWithOrWithoutAC OBJECT-TYPE SYNTAX INTEGER { noRebootUpsWithOrWithoutAC (1), rebootUpsImmediatelyWithOrWithoutAC (2), rebootUpsDelayedWithOrWithoutAC (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this variable to rebootUpsImmediatelyWithOrWithoutAC (2) causes the UPS to turn off immediately, wait for a minimum time (typically 8 seconds), and then turn back on regardless of the AC input power on the UPS. Any supported switched outlet groups will be turned off immediately but will turn on based on their individual settings (to allow on sequencing). Setting this variable to rebootUpsDelayedWithOrWithoutAC (3) causes the UPS to turn off after a delay period, wait for a minimum time (typically 8 seconds), and then turn back on regardless of the AC input power on the UPS. Any supported switched outlet groups will be turned off and on based on their individual settings (to allow off and/or on sequencing). Setting this value to noRebootUpsWithOrWithoutAC (1) has no effect. The value noRebootUpsWithOrWithoutAC (1) will always be returned when the variable is read." ::= { upsAdvControl 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.1.6.2.8.0 | upsAdvControlRebootUpsWithOrWithoutAC | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.1.6.2.1 | upsAdvControlUpsOff | 1 | 1 | Setting this variable to turnUpsOff(2) causes the UPS to shut off. When in this state, the UPS will not provide output power reg… |
| 1.3.6.1.4.1.318.1.1.1.6.2.2 | upsAdvControlRebootShutdownUps, upsAdvControlRebootUps | 1 | 1 | Setting this value to noRebootUps(1) has no effect. Setting this variable to rebootUps(2) causes the UPS to shut off and turn bac… |
| 1.3.6.1.4.1.318.1.1.1.6.2.3 | upsAdvControlUpsSleep | 1 | 1 | Setting this value to noPutUpsToSleep(1) has no effect. Setting this variable to putUpsToSleep(2) causes the UPS to go to sleep f… |
| 1.3.6.1.4.1.318.1.1.1.6.2.4 | upsAdvControlSimulatePowerFail | 1 | 1 | Setting this variable to simulatePowerFailure(2) causes the UPS switch to battery power. Setting this value to noSimulatePowerFai… |
| 1.3.6.1.4.1.318.1.1.1.6.2.5 | upsAdvControlFlashAndBeep | 1 | 1 | Setting this variable to flashAndBeep(2) causes the UPS to beep and simultaneously turn on the UPS front panel lights (Smart-UPS … |
| 1.3.6.1.4.1.318.1.1.1.6.2.6 | upsAdvControlTurnOnUPS | 1 | 1 | Setting this variable to turnOnUPS(2) causes the UPS to be turned on immediately, provided upsBasicOutputStatus does not read ON.… |
| 1.3.6.1.4.1.318.1.1.1.6.2.7 | upsAdvControlBypassSwitch | 1 | 1 | This switch puts the UPS in or out of bypass mode. |
| 1.3.6.1.4.1.318.1.1.1.6.2.9 | upsAdvControlFirmwareUpdate | 1 | 1 | Setting this variable to firmwareUpdate(2) causes the UPS to begin a firmware update if possible. Setting this value to noFirmwa… |