Reference record for OID 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.10

docsRphyRpdIfEnetSfpPlusStatusLengthKm

Status in source: current.

Names: docsRphyRpdIfEnetSfpPlusStatusLengthKm

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "docsRphyRpdIfEnetSfpPlusStatusLengthKm",
    "OBJECT-TYPE",
    "SYNTAX",
    "Unsigned32",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "UNITS",
    [
      "literal",
      "226b6d22"
    ],
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This attribute reports the link length that is supported by the transceiver while operating in compliance with the applicable standards using single mode fiber. The value is in units of kilometers. A value of 255 means that the transceiver supports a link length greater than 254 km. A value of zero means that the transceiver does not support single mode fiber or that the length information has to be determined from the transceiver technology.\"",
    "::=",
    "{",
    "docsRphyRpdIfEnetSfpPlusStatusEntry",
    "10",
    "}"
  ],
  "syntax_tree": [
    [
      "ApplicationSyntax",
      "Unsigned32",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    [
      "UNITS",
      "km"
    ],
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This attribute reports the link length that is supported by the transceiver while operating in compliance with the applicable standards using single mode fiber. The value is in units of kilometers. A value of 255 means that the transceiver supports a link length greater than 254 km. A value of zero means that the transceiver does not support single mode fiber or that the length information has to be determined from the transceiver technology."
    ],
    null,
    null,
    null,
    null
  ]
}

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2019-01-24.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLengthKm   OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "km"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
              "This attribute reports the link length that is 
               supported by the transceiver while operating in 
               compliance with the applicable standards using single 
               mode fiber. The value is in units of kilometers. 
               A value of 255 means that the transceiver supports a 
               link length greater than 254 km. A value of zero means
               that the transceiver does not support single mode fiber 
               or that the length information has to be determined from 
               the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 10 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2019-01-24.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLengthKm.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.074775+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2019-06-13.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLengthKm   OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "km"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single 
           mode fiber. The value is in units of kilometers. 
           A value of 255 means that the transceiver supports a 
           link length greater than 254 km. A value of zero means
           that the transceiver does not support single mode fiber 
           or that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 10 }

  Module imports

  {'IF-MIB': ['InterfaceIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2019-06-13.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLengthKm.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.180890+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2019-09-26.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLengthKm   OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "km"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single 
           mode fiber. The value is in units of kilometers. 
           A value of 255 means that the transceiver supports a 
           link length greater than 254 km. A value of zero means
           that the transceiver does not support single mode fiber 
           or that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 10 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2019-09-26.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLengthKm.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.289076+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2020-01-09.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLengthKm   OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "km"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single 
           mode fiber. The value is in units of kilometers. 
           A value of 255 means that the transceiver supports a 
           link length greater than 254 km. A value of zero means
           that the transceiver does not support single mode fiber 
           or that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 10 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2020-01-09.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLengthKm.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.938082+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2020-05-21.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLengthKm   OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "km"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single 
           mode fiber. The value is in units of kilometers. 
           A value of 255 means that the transceiver supports a 
           link length greater than 254 km. A value of zero means
           that the transceiver does not support single mode fiber 
           or that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 10 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2020-05-21.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLengthKm.
  Source version and references

  Downloaded: 2026-10-26T22:49:56.205690+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2020-10-01.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLengthKm   OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "km"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single 
           mode fiber. The value is in units of kilometers. 
           A value of 255 means that the transceiver supports a 
           link length greater than 254 km. A value of zero means
           that the transceiver does not support single mode fiber 
           or that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 10 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2020-10-01.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLengthKm.
  Source version and references

  Downloaded: 2026-10-26T22:49:56.354948+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2021-03-11.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLengthKm   OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "km"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single 
           mode fiber. The value is in units of kilometers. 
           A value of 255 means that the transceiver supports a 
           link length greater than 254 km. A value of zero means
           that the transceiver does not support single mode fiber 
           or that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 10 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2021-03-11.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLengthKm.
  Source version and references

  Downloaded: 2026-10-26T22:49:56.429401+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2021-10-21.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLengthKm   OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "km"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single 
           mode fiber. The value is in units of kilometers. 
           A value of 255 means that the transceiver supports a 
           link length greater than 254 km. A value of zero means
           that the transceiver does not support single mode fiber 
           or that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 10 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2021-10-21.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLengthKm.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.003028+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-01-20.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLengthKm   OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "km"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single 
           mode fiber. The value is in units of kilometers. 
           A value of 255 means that the transceiver supports a 
           link length greater than 254 km. A value of zero means
           that the transceiver does not support single mode fiber 
           or that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 10 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-01-20.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLengthKm.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.394938+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-03-31.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLengthKm   OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "km"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single 
           mode fiber. The value is in units of kilometers. 
           A value of 255 means that the transceiver supports a 
           link length greater than 254 km. A value of zero means
           that the transceiver does not support single mode fiber 
           or that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 10 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-03-31.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLengthKm.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.424309+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-06-30.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLengthKm   OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "km"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single 
           mode fiber. The value is in units of kilometers. 
           A value of 255 means that the transceiver supports a 
           link length greater than 254 km. A value of zero means
           that the transceiver does not support single mode fiber 
           or that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 10 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-06-30.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLengthKm.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.542970+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-12-01.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLengthKm   OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "km"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single 
           mode fiber. The value is in units of kilometers. 
           A value of 255 means that the transceiver supports a 
           link length greater than 254 km. A value of zero means
           that the transceiver does not support single mode fiber 
           or that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 10 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-12-01.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLengthKm.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.089920+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2023-10-12.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLengthKm   OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "km"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single 
           mode fiber. The value is in units of kilometers. 
           A value of 255 means that the transceiver supports a 
           link length greater than 254 km. A value of zero means
           that the transceiver does not support single mode fiber 
           or that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 10 }

  Module imports

  {'IF-MIB': ['ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['InterfaceIndex', 'TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.

  · Download DOCS-RPHY-MIB-2023-10-12.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLengthKm.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.579257+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2024-01-18.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLengthKm   OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "km"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single 
           mode fiber. The value is in units of kilometers. 
           A value of 255 means that the transceiver supports a 
           link length greater than 254 km. A value of zero means
           that the transceiver does not support single mode fiber 
           or that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 10 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2024-01-18.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLengthKm.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.575041+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2025-01-23.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLengthKm   OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "km"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single 
           mode fiber. The value is in units of kilometers. 
           A value of 255 means that the transceiver supports a 
           link length greater than 254 km. A value of zero means
           that the transceiver does not support single mode fiber 
           or that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 10 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2025-01-23.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLengthKm.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.705674+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB.mib

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLengthKm   OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "km"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single 
           mode fiber. The value is in units of kilometers. 
           A value of 255 means that the transceiver supports a 
           link length greater than 254 km. A value of zero means
           that the transceiver does not support single mode fiber 
           or that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 10 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB.mib
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLengthKm.
  Source version and references

  Downloaded: 2026-10-26T22:47:25.372984+00:00.