docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType — CableLabs official current and historical MIBs
This attribute reports how diagnostic monitoring is implemented in the selected transceiver.
{1 3 6 1 4 1 4491 2 1 30 1 2 8 1 27}
This attribute reports how diagnostic monitoring is implemented in the selected transceiver.
This attribute reports how diagnostic monitoring is implemented in the selected transceiver. The following diagnostic monitoring types can be reported: unallocated: unallocated diagnostic monitoring type unallocated1: unallocated diagnostic monitoring type addrChangeReq: Address change required recPwrMeasType: Received power measurement type. 0 = OMA, 1 = average power. externCalibrated: externally calibrated internCalibrated: internally calibrated digDiagImpl: digital diagnostic monitoring implemented legacyImpl: Reserved for legacy diagnostic implementations. Must be '0' for compliance with [SFF 8472]. Reference [SFF 8472]
This attribute reports how diagnostic monitoring is implemented in the selected transceiver. Note: The encoding of bit values of this attribute reflects the inverse bit numbering convention of the SFF specification.
Status in source: current.
Names: docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType",
"OBJECT-TYPE",
"SYNTAX",
"BITS",
"{",
"unallocated0",
"(",
"0",
")",
",",
"unallocated1",
"(",
"1",
")",
",",
"addrChangeReq",
"(",
"2",
")",
",",
"recPwrMeasType",
"(",
"3",
")",
",",
"externCalibrated",
"(",
"4",
")",
",",
"internCalibrated",
"(",
"5",
")",
",",
"digDiagImpl",
"(",
"6",
")",
",",
"legacyImpl",
"(",
"7",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This attribute reports how diagnostic monitoring is implemented in the selected transceiver.\"",
"::=",
"{",
"docsRphyRpdIfEnetSfpPlusStatusEntry",
"27",
"}"
],
"syntax_tree": [
[
"BITS",
[
[
"unallocated0",
0
],
[
"unallocated1",
1
],
[
"addrChangeReq",
2
],
[
"recPwrMeasType",
3
],
[
"externCalibrated",
4
],
[
"internCalibrated",
5
],
[
"digDiagImpl",
6
],
[
"legacyImpl",
7
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This attribute reports how diagnostic monitoring is implemented in the selected transceiver."
],
null,
null,
null,
null
]
}Module: DOCS-RPHY-MIB
docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType OBJECT-TYPE
SYNTAX BITS {
unallocated0(0),
unallocated1(1),
addrChangeReq(2),
recPwrMeasType(3),
externCalibrated(4),
internCalibrated(5),
digDiagImpl(6),
legacyImpl(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports how diagnostic monitoring
is implemented in the selected transceiver."
::= { docsRphyRpdIfEnetSfpPlusStatusEntry 27 }{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:55.074775+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType OBJECT-TYPE
SYNTAX BITS {
unallocated0(0),
unallocated1(1),
addrChangeReq(2),
recPwrMeasType(3),
externCalibrated(4),
internCalibrated(5),
digDiagImpl(6),
legacyImpl(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports how diagnostic monitoring
is implemented in the selected transceiver."
::= { docsRphyRpdIfEnetSfpPlusStatusEntry 27 }{'IF-MIB': ['InterfaceIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:55.180890+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType OBJECT-TYPE
SYNTAX BITS {
unallocated0(0),
unallocated1(1),
addrChangeReq(2),
recPwrMeasType(3),
externCalibrated(4),
internCalibrated(5),
digDiagImpl(6),
legacyImpl(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports how diagnostic monitoring
is implemented in the selected transceiver."
::= { docsRphyRpdIfEnetSfpPlusStatusEntry 27 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:55.289076+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType OBJECT-TYPE
SYNTAX BITS {
unallocated0(0),
unallocated1(1),
addrChangeReq(2),
recPwrMeasType(3),
externCalibrated(4),
internCalibrated(5),
digDiagImpl(6),
legacyImpl(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports how diagnostic monitoring
is implemented in the selected transceiver."
::= { docsRphyRpdIfEnetSfpPlusStatusEntry 27 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:55.938082+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType OBJECT-TYPE
SYNTAX BITS {
unallocated0(0),
unallocated1(1),
addrChangeReq(2),
recPwrMeasType(3),
externCalibrated(4),
internCalibrated(5),
digDiagImpl(6),
legacyImpl(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports how diagnostic monitoring
is implemented in the selected transceiver."
::= { docsRphyRpdIfEnetSfpPlusStatusEntry 27 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:56.354948+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType OBJECT-TYPE
SYNTAX BITS {
unallocated0(0),
unallocated1(1),
addrChangeReq(2),
recPwrMeasType(3),
externCalibrated(4),
internCalibrated(5),
digDiagImpl(6),
legacyImpl(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports how diagnostic monitoring
is implemented in the selected transceiver."
::= { docsRphyRpdIfEnetSfpPlusStatusEntry 27 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:56.429401+00:00.
Status in source: current.
Names: docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType",
"OBJECT-TYPE",
"SYNTAX",
"BITS",
"{",
"unallocated0",
"(",
"0",
")",
",",
"unallocated1",
"(",
"1",
")",
",",
"addrChangeReq",
"(",
"2",
")",
",",
"recPwrMeasType",
"(",
"3",
")",
",",
"externCalibrated",
"(",
"4",
")",
",",
"internCalibrated",
"(",
"5",
")",
",",
"digDiagImpl",
"(",
"6",
")",
",",
"legacyImpl",
"(",
"7",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This attribute reports how diagnostic monitoring is implemented in the selected transceiver. The following diagnostic monitoring types can be reported: unallocated: unallocated diagnostic monitoring type unallocated1: unallocated diagnostic monitoring type addrChangeReq: Address change required recPwrMeasType: Received power measurement type. 0 = OMA, 1 = average power. externCalibrated: externally calibrated internCalibrated: internally calibrated digDiagImpl: digital diagnostic monitoring implemented legacyImpl: Reserved for legacy diagnostic implementations. Must be '0' for compliance with [SFF 8472]. Reference [SFF 8472]\"",
"::=",
"{",
"docsRphyRpdIfEnetSfpPlusStatusEntry",
"27",
"}"
],
"syntax_tree": [
[
"BITS",
[
[
"unallocated0",
0
],
[
"unallocated1",
1
],
[
"addrChangeReq",
2
],
[
"recPwrMeasType",
3
],
[
"externCalibrated",
4
],
[
"internCalibrated",
5
],
[
"digDiagImpl",
6
],
[
"legacyImpl",
7
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This attribute reports how diagnostic monitoring is implemented in the selected transceiver. The following diagnostic monitoring types can be reported: unallocated: unallocated diagnostic monitoring type unallocated1: unallocated diagnostic monitoring type addrChangeReq: Address change required recPwrMeasType: Received power measurement type. 0 = OMA, 1 = average power. externCalibrated: externally calibrated internCalibrated: internally calibrated digDiagImpl: digital diagnostic monitoring implemented legacyImpl: Reserved for legacy diagnostic implementations. Must be '0' for compliance with [SFF 8472]. Reference [SFF 8472]"
],
null,
null,
null,
null
]
}Module: DOCS-RPHY-MIB
docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType OBJECT-TYPE
SYNTAX BITS {
unallocated0(0),
unallocated1(1),
addrChangeReq(2),
recPwrMeasType(3),
externCalibrated(4),
internCalibrated(5),
digDiagImpl(6),
legacyImpl(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports how diagnostic monitoring
is implemented in the selected transceiver.
The following diagnostic monitoring types can be reported:
unallocated: unallocated diagnostic monitoring type
unallocated1: unallocated diagnostic monitoring type
addrChangeReq: Address change required
recPwrMeasType: Received power measurement type. 0 = OMA, 1 = average power.
externCalibrated: externally calibrated
internCalibrated: internally calibrated
digDiagImpl: digital diagnostic monitoring implemented
legacyImpl: Reserved for legacy diagnostic implementations.
Must be '0' for compliance with [SFF 8472].
Reference [SFF 8472]"
::= { docsRphyRpdIfEnetSfpPlusStatusEntry 27 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:57.003028+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType OBJECT-TYPE
SYNTAX BITS {
unallocated0(0),
unallocated1(1),
addrChangeReq(2),
recPwrMeasType(3),
externCalibrated(4),
internCalibrated(5),
digDiagImpl(6),
legacyImpl(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports how diagnostic monitoring
is implemented in the selected transceiver.
The following diagnostic monitoring types can be reported:
unallocated: unallocated diagnostic monitoring type
unallocated1: unallocated diagnostic monitoring type
addrChangeReq: Address change required
recPwrMeasType: Received power measurement type. 0 = OMA, 1 = average power.
externCalibrated: externally calibrated
internCalibrated: internally calibrated
digDiagImpl: digital diagnostic monitoring implemented
legacyImpl: Reserved for legacy diagnostic implementations.
Must be '0' for compliance with [SFF 8472].
Reference [SFF 8472]"
::= { docsRphyRpdIfEnetSfpPlusStatusEntry 27 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:57.394938+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType OBJECT-TYPE
SYNTAX BITS {
unallocated0(0),
unallocated1(1),
addrChangeReq(2),
recPwrMeasType(3),
externCalibrated(4),
internCalibrated(5),
digDiagImpl(6),
legacyImpl(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports how diagnostic monitoring
is implemented in the selected transceiver.
The following diagnostic monitoring types can be reported:
unallocated: unallocated diagnostic monitoring type
unallocated1: unallocated diagnostic monitoring type
addrChangeReq: Address change required
recPwrMeasType: Received power measurement type. 0 = OMA, 1 = average power.
externCalibrated: externally calibrated
internCalibrated: internally calibrated
digDiagImpl: digital diagnostic monitoring implemented
legacyImpl: Reserved for legacy diagnostic implementations.
Must be '0' for compliance with [SFF 8472].
Reference [SFF 8472]"
::= { docsRphyRpdIfEnetSfpPlusStatusEntry 27 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:57.424309+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType OBJECT-TYPE
SYNTAX BITS {
unallocated0(0),
unallocated1(1),
addrChangeReq(2),
recPwrMeasType(3),
externCalibrated(4),
internCalibrated(5),
digDiagImpl(6),
legacyImpl(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports how diagnostic monitoring
is implemented in the selected transceiver.
The following diagnostic monitoring types can be reported:
unallocated: unallocated diagnostic monitoring type
unallocated1: unallocated diagnostic monitoring type
addrChangeReq: Address change required
recPwrMeasType: Received power measurement type. 0 = OMA, 1 = average power.
externCalibrated: externally calibrated
internCalibrated: internally calibrated
digDiagImpl: digital diagnostic monitoring implemented
legacyImpl: Reserved for legacy diagnostic implementations.
Must be '0' for compliance with [SFF 8472].
Reference [SFF 8472]"
::= { docsRphyRpdIfEnetSfpPlusStatusEntry 27 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:57.542970+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType OBJECT-TYPE
SYNTAX BITS {
unallocated0(0),
unallocated1(1),
addrChangeReq(2),
recPwrMeasType(3),
externCalibrated(4),
internCalibrated(5),
digDiagImpl(6),
legacyImpl(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports how diagnostic monitoring
is implemented in the selected transceiver.
The following diagnostic monitoring types can be reported:
unallocated: unallocated diagnostic monitoring type
unallocated1: unallocated diagnostic monitoring type
addrChangeReq: Address change required
recPwrMeasType: Received power measurement type. 0 = OMA, 1 = average power.
externCalibrated: externally calibrated
internCalibrated: internally calibrated
digDiagImpl: digital diagnostic monitoring implemented
legacyImpl: Reserved for legacy diagnostic implementations.
Must be '0' for compliance with [SFF 8472].
Reference [SFF 8472]"
::= { docsRphyRpdIfEnetSfpPlusStatusEntry 27 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:58.089920+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType OBJECT-TYPE
SYNTAX BITS {
unallocated0(0),
unallocated1(1),
addrChangeReq(2),
recPwrMeasType(3),
externCalibrated(4),
internCalibrated(5),
digDiagImpl(6),
legacyImpl(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports how diagnostic monitoring
is implemented in the selected transceiver.
The following diagnostic monitoring types can be reported:
unallocated: unallocated diagnostic monitoring type
unallocated1: unallocated diagnostic monitoring type
addrChangeReq: Address change required
recPwrMeasType: Received power measurement type. 0 = OMA, 1 = average power.
externCalibrated: externally calibrated
internCalibrated: internally calibrated
digDiagImpl: digital diagnostic monitoring implemented
legacyImpl: Reserved for legacy diagnostic implementations.
Must be '0' for compliance with [SFF 8472].
Reference [SFF 8472]"
::= { docsRphyRpdIfEnetSfpPlusStatusEntry 27 }{'IF-MIB': ['ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['InterfaceIndex', 'TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
· Download DOCS-RPHY-MIB-2023-10-12.txtDownloaded: 2026-10-26T22:49:58.579257+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType OBJECT-TYPE
SYNTAX BITS {
unallocated0(0),
unallocated1(1),
addrChangeReq(2),
recPwrMeasType(3),
externCalibrated(4),
internCalibrated(5),
digDiagImpl(6),
legacyImpl(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports how diagnostic monitoring
is implemented in the selected transceiver.
The following diagnostic monitoring types can be reported:
unallocated: unallocated diagnostic monitoring type
unallocated1: unallocated diagnostic monitoring type
addrChangeReq: Address change required
recPwrMeasType: Received power measurement type. 0 = OMA, 1 = average power.
externCalibrated: externally calibrated
internCalibrated: internally calibrated
digDiagImpl: digital diagnostic monitoring implemented
legacyImpl: Reserved for legacy diagnostic implementations.
Must be '0' for compliance with [SFF 8472].
Reference [SFF 8472]"
::= { docsRphyRpdIfEnetSfpPlusStatusEntry 27 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:58.575041+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType OBJECT-TYPE
SYNTAX BITS {
unallocated0(0),
unallocated1(1),
addrChangeReq(2),
recPwrMeasType(3),
externCalibrated(4),
internCalibrated(5),
digDiagImpl(6),
legacyImpl(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports how diagnostic monitoring
is implemented in the selected transceiver.
The following diagnostic monitoring types can be reported:
unallocated: unallocated diagnostic monitoring type
unallocated1: unallocated diagnostic monitoring type
addrChangeReq: Address change required
recPwrMeasType: Received power measurement type. 0 = OMA, 1 = average power.
externCalibrated: externally calibrated
internCalibrated: internally calibrated
digDiagImpl: digital diagnostic monitoring implemented
legacyImpl: Reserved for legacy diagnostic implementations.
Must be '0' for compliance with [SFF 8472].
Reference [SFF 8472]"
::= { docsRphyRpdIfEnetSfpPlusStatusEntry 27 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:58.705674+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType OBJECT-TYPE
SYNTAX BITS {
unallocated0(0),
unallocated1(1),
addrChangeReq(2),
recPwrMeasType(3),
externCalibrated(4),
internCalibrated(5),
digDiagImpl(6),
legacyImpl(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports how diagnostic monitoring
is implemented in the selected transceiver.
The following diagnostic monitoring types can be reported:
unallocated: unallocated diagnostic monitoring type
unallocated1: unallocated diagnostic monitoring type
addrChangeReq: Address change required
recPwrMeasType: Received power measurement type. 0 = OMA, 1 = average power.
externCalibrated: externally calibrated
internCalibrated: internally calibrated
digDiagImpl: digital diagnostic monitoring implemented
legacyImpl: Reserved for legacy diagnostic implementations.
Must be '0' for compliance with [SFF 8472].
Reference [SFF 8472]"
::= { docsRphyRpdIfEnetSfpPlusStatusEntry 27 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:47:25.372984+00:00.
Status in source: current.
Names: docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType",
"OBJECT-TYPE",
"SYNTAX",
"BITS",
"{",
"legacyImpl",
"(",
"0",
")",
",",
"digDiagImpl",
"(",
"1",
")",
",",
"internCalibrated",
"(",
"2",
")",
",",
"externCalibrated",
"(",
"3",
")",
",",
"recPwrMeasType",
"(",
"4",
")",
",",
"addrChangeReq",
"(",
"5",
")",
",",
"unallocated1",
"(",
"6",
")",
",",
"unallocated0",
"(",
"7",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This attribute reports how diagnostic monitoring is implemented in the selected transceiver. Note: The encoding of bit values of this attribute reflects the inverse bit numbering convention of the SFF specification.\"",
"::=",
"{",
"docsRphyRpdIfEnetSfpPlusStatusEntry",
"27",
"}"
],
"syntax_tree": [
[
"BITS",
[
[
"legacyImpl",
0
],
[
"digDiagImpl",
1
],
[
"internCalibrated",
2
],
[
"externCalibrated",
3
],
[
"recPwrMeasType",
4
],
[
"addrChangeReq",
5
],
[
"unallocated1",
6
],
[
"unallocated0",
7
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This attribute reports how diagnostic monitoring is implemented in the selected transceiver. Note: The encoding of bit values of this attribute reflects the inverse bit numbering convention of the SFF specification."
],
null,
null,
null,
null
]
}Module: DOCS-RPHY-MIB
docsRphyRpdIfEnetSfpPlusStatusDiagMonitorType OBJECT-TYPE
SYNTAX BITS {
legacyImpl(0),
digDiagImpl(1),
internCalibrated(2),
externCalibrated(3),
recPwrMeasType(4),
addrChangeReq(5),
unallocated1(6),
unallocated0(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports how diagnostic monitoring
is implemented in the selected transceiver.
Note: The encoding of bit values of this attribute
reflects the inverse bit numbering convention
of the SFF specification."
::= { docsRphyRpdIfEnetSfpPlusStatusEntry 27 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:56.205690+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.1 | docsRphyRpdIfEnetSfpPlusStatusStatus | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.2 | docsRphyRpdIfEnetSfpPlusStatusIdentifier | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.3 | docsRphyRpdIfEnetSfpPlusStatusExtendedIdentifier | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.4 | docsRphyRpdIfEnetSfpPlusStatusConnectorType | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.5 | docsRphyRpdIfEnetSfpPlusStatusTransceiverComplianceCodes | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.6 | docsRphyRpdIfEnetSfpPlusStatusTransceiverComplianceCode36 | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.7 | docsRphyRpdIfEnetSfpPlusStatusEncoding | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.8 | docsRphyRpdIfEnetSfpPlusStatusBitRateNominal | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.9 | docsRphyRpdIfEnetSfpPlusStatusRateIdentifier | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.10 | docsRphyRpdIfEnetSfpPlusStatusLengthKm | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.11 | docsRphyRpdIfEnetSfpPlusStatusLength100M | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.12 | docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.13 | docsRphyRpdIfEnetSfpPlusStatusLength62Pt5Mi10M | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.14 | docsRphyRpdIfEnetSfpPlusStatusLengthCopperM | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.15 | docsRphyRpdIfEnetSfpPlusStatusLength50MiOm3 | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.16 | docsRphyRpdIfEnetSfpPlusStatusVendorName | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.17 | docsRphyRpdIfEnetSfpPlusStatusVendorOui | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.18 | docsRphyRpdIfEnetSfpPlusStatusVendorPartNum | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.19 | docsRphyRpdIfEnetSfpPlusStatusVendorSerialNum | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.20 | docsRphyRpdIfEnetSfpPlusStatusVendorRev | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.21 | docsRphyRpdIfEnetSfpPlusStatusLaserWavelength | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.22 | docsRphyRpdIfEnetSfpPlusStatusOptions | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.23 | docsRphyRpdIfEnetSfpPlusStatusBitRateMax | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.24 | docsRphyRpdIfEnetSfpPlusStatusBitRateMin | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.25 | docsRphyRpdIfEnetSfpPlusStatusVendorDate | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.26 | docsRphyRpdIfEnetSfpPlusStatusVendorSpecificLotCode | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.28 | docsRphyRpdIfEnetSfpPlusStatusEnhancedOptions | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.29 | docsRphyRpdIfEnetSfpPlusStatusSff8472Compliance | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.30 | docsRphyRpdIfEnetSfpPlusStatusVendorSpecificData | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.31 | docsRphyRpdIfEnetSfpPlusStatusMeasuredTxOutputPwr | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.32 | docsRphyRpdIfEnetSfpPlusStatusMeasuredRxInputPwr | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.33 | docsRphyRpdIfEnetSfpPlusStatusDigitalDiagA2Info | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.34 | docsRphyRpdIfEnetSfpPlusStatusMeasuredTxBiasCurrent | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.35 | docsRphyRpdIfEnetSfpPlusStatusMeasuredTemperature | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.36 | docsRphyRpdIfEnetSfpPlusStatusMeasuredSupplyVoltage | 0 | 0 |