Reference record for OID 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.12

docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M

Status in source: current.

Names: docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M",
    "OBJECT-TYPE",
    "SYNTAX",
    "Unsigned32",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "UNITS",
    [
      "literal",
      "22313073206f66206d657465727322"
    ],
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This attribute reports link length that is supported by the transceiver while operating in compliance with applicable standards using 50 micron multimode OM2 [500MHz*km at 850nm] fiber. The value is in units of 10 meters. A value of 255 means that the transceiver supports a link length greater than 2.54 km. A value of zero means that the transceiver does not support 50 micron multimode fiber or that the length information has to be determined from the transceiver technology.\"",
    "::=",
    "{",
    "docsRphyRpdIfEnetSfpPlusStatusEntry",
    "12",
    "}"
  ],
  "syntax_tree": [
    [
      "ApplicationSyntax",
      "Unsigned32",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    [
      "UNITS",
      "10s of meters"
    ],
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This attribute reports link length that is supported by the transceiver while operating in compliance with applicable standards using 50 micron multimode OM2 [500MHz*km at 850nm] fiber. The value is in units of 10 meters. A value of 255 means that the transceiver supports a link length greater than 2.54 km. A value of zero means that the transceiver does not support 50 micron multimode fiber or that the length information has to be determined from the transceiver technology."
    ],
    null,
    null,
    null,
    null
  ]
}

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2019-01-24.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "10s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
              "This attribute reports link length that is supported by
               the transceiver while operating in compliance with 
               applicable standards using 50 micron multimode OM2 
               [500MHz*km at 850nm] fiber. The value is in units of 
               10 meters. A value of 255 means that the transceiver 
               supports a link length greater than 2.54 km. A value of 
               zero means that the transceiver does not support 50 micron 
               multimode fiber or that the length information has to be 
               determined from the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 12 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2019-01-24.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.074775+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2019-06-13.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "10s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports link length that is supported by
           the transceiver while operating in compliance with 
           applicable standards using 50 micron multimode OM2 
           [500MHz*km at 850nm] fiber. The value is in units of 
           10 meters. A value of 255 means that the transceiver 
           supports a link length greater than 2.54 km. A value of 
           zero means that the transceiver does not support 50 micron 
           multimode fiber or that the length information has to be 
           determined from the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 12 }

  Module imports

  {'IF-MIB': ['InterfaceIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2019-06-13.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.180890+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2019-09-26.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "10s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports link length that is supported by
           the transceiver while operating in compliance with 
           applicable standards using 50 micron multimode OM2 
           [500MHz*km at 850nm] fiber. The value is in units of 
           10 meters. A value of 255 means that the transceiver 
           supports a link length greater than 2.54 km. A value of 
           zero means that the transceiver does not support 50 micron 
           multimode fiber or that the length information has to be 
           determined from the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 12 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2019-09-26.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.289076+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2020-01-09.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "10s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports link length that is supported by
           the transceiver while operating in compliance with 
           applicable standards using 50 micron multimode OM2 
           [500MHz*km at 850nm] fiber. The value is in units of 
           10 meters. A value of 255 means that the transceiver 
           supports a link length greater than 2.54 km. A value of 
           zero means that the transceiver does not support 50 micron 
           multimode fiber or that the length information has to be 
           determined from the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 12 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2020-01-09.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.938082+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2020-05-21.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "10s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports link length that is supported by
           the transceiver while operating in compliance with 
           applicable standards using 50 micron multimode OM2 
           [500MHz*km at 850nm] fiber. The value is in units of 
           10 meters. A value of 255 means that the transceiver 
           supports a link length greater than 2.54 km. A value of 
           zero means that the transceiver does not support 50 micron 
           multimode fiber or that the length information has to be 
           determined from the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 12 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2020-05-21.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M.
  Source version and references

  Downloaded: 2026-10-26T22:49:56.205690+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2020-10-01.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "10s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports link length that is supported by
           the transceiver while operating in compliance with 
           applicable standards using 50 micron multimode OM2 
           [500MHz*km at 850nm] fiber. The value is in units of 
           10 meters. A value of 255 means that the transceiver 
           supports a link length greater than 2.54 km. A value of 
           zero means that the transceiver does not support 50 micron 
           multimode fiber or that the length information has to be 
           determined from the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 12 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2020-10-01.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M.
  Source version and references

  Downloaded: 2026-10-26T22:49:56.354948+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2021-03-11.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "10s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports link length that is supported by
           the transceiver while operating in compliance with 
           applicable standards using 50 micron multimode OM2 
           [500MHz*km at 850nm] fiber. The value is in units of 
           10 meters. A value of 255 means that the transceiver 
           supports a link length greater than 2.54 km. A value of 
           zero means that the transceiver does not support 50 micron 
           multimode fiber or that the length information has to be 
           determined from the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 12 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2021-03-11.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M.
  Source version and references

  Downloaded: 2026-10-26T22:49:56.429401+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2021-10-21.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "10s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports link length that is supported by
           the transceiver while operating in compliance with 
           applicable standards using 50 micron multimode OM2 
           [500MHz*km at 850nm] fiber. The value is in units of 
           10 meters. A value of 255 means that the transceiver 
           supports a link length greater than 2.54 km. A value of 
           zero means that the transceiver does not support 50 micron 
           multimode fiber or that the length information has to be 
           determined from the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 12 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2021-10-21.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.003028+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-01-20.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "10s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports link length that is supported by
           the transceiver while operating in compliance with 
           applicable standards using 50 micron multimode OM2 
           [500MHz*km at 850nm] fiber. The value is in units of 
           10 meters. A value of 255 means that the transceiver 
           supports a link length greater than 2.54 km. A value of 
           zero means that the transceiver does not support 50 micron 
           multimode fiber or that the length information has to be 
           determined from the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 12 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-01-20.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.394938+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-03-31.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "10s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports link length that is supported by
           the transceiver while operating in compliance with 
           applicable standards using 50 micron multimode OM2 
           [500MHz*km at 850nm] fiber. The value is in units of 
           10 meters. A value of 255 means that the transceiver 
           supports a link length greater than 2.54 km. A value of 
           zero means that the transceiver does not support 50 micron 
           multimode fiber or that the length information has to be 
           determined from the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 12 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-03-31.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.424309+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-06-30.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "10s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports link length that is supported by
           the transceiver while operating in compliance with 
           applicable standards using 50 micron multimode OM2 
           [500MHz*km at 850nm] fiber. The value is in units of 
           10 meters. A value of 255 means that the transceiver 
           supports a link length greater than 2.54 km. A value of 
           zero means that the transceiver does not support 50 micron 
           multimode fiber or that the length information has to be 
           determined from the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 12 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-06-30.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.542970+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-12-01.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "10s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports link length that is supported by
           the transceiver while operating in compliance with 
           applicable standards using 50 micron multimode OM2 
           [500MHz*km at 850nm] fiber. The value is in units of 
           10 meters. A value of 255 means that the transceiver 
           supports a link length greater than 2.54 km. A value of 
           zero means that the transceiver does not support 50 micron 
           multimode fiber or that the length information has to be 
           determined from the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 12 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-12-01.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.089920+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2023-10-12.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "10s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports link length that is supported by
           the transceiver while operating in compliance with 
           applicable standards using 50 micron multimode OM2 
           [500MHz*km at 850nm] fiber. The value is in units of 
           10 meters. A value of 255 means that the transceiver 
           supports a link length greater than 2.54 km. A value of 
           zero means that the transceiver does not support 50 micron 
           multimode fiber or that the length information has to be 
           determined from the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 12 }

  Module imports

  {'IF-MIB': ['ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['InterfaceIndex', 'TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.

  · Download DOCS-RPHY-MIB-2023-10-12.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.579257+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2024-01-18.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "10s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports link length that is supported by
           the transceiver while operating in compliance with 
           applicable standards using 50 micron multimode OM2 
           [500MHz*km at 850nm] fiber. The value is in units of 
           10 meters. A value of 255 means that the transceiver 
           supports a link length greater than 2.54 km. A value of 
           zero means that the transceiver does not support 50 micron 
           multimode fiber or that the length information has to be 
           determined from the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 12 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2024-01-18.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.575041+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2025-01-23.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "10s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports link length that is supported by
           the transceiver while operating in compliance with 
           applicable standards using 50 micron multimode OM2 
           [500MHz*km at 850nm] fiber. The value is in units of 
           10 meters. A value of 255 means that the transceiver 
           supports a link length greater than 2.54 km. A value of 
           zero means that the transceiver does not support 50 micron 
           multimode fiber or that the length information has to be 
           determined from the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 12 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2025-01-23.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.705674+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB.mib

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "10s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports link length that is supported by
           the transceiver while operating in compliance with 
           applicable standards using 50 micron multimode OM2 
           [500MHz*km at 850nm] fiber. The value is in units of 
           10 meters. A value of 255 means that the transceiver 
           supports a link length greater than 2.54 km. A value of 
           zero means that the transceiver does not support 50 micron 
           multimode fiber or that the length information has to be 
           determined from the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 12 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB.mib
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength50Mi10M.
  Source version and references

  Downloaded: 2026-10-26T22:47:25.372984+00:00.