Reference record for OID 1.3.6.1.4.1.4491.2.1.30.1.2.8.1.11

docsRphyRpdIfEnetSfpPlusStatusLength100M

Status in source: current.

Names: docsRphyRpdIfEnetSfpPlusStatusLength100M

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "docsRphyRpdIfEnetSfpPlusStatusLength100M",
    "OBJECT-TYPE",
    "SYNTAX",
    "Unsigned32",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "UNITS",
    [
      "literal",
      "2231303073206f66206d657465727322"
    ],
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This attribute reports the link length that is supported by the transceiver while operating in compliance with the applicable standards using single mode fiber. The value is in units of 100s of meters. A value of 255 means that the transceiver supports a link length greater than 25.4 km. A value of zero means that the transceiver does not support single mode fiber or that the length information has to be determined from the transceiver technology.\"",
    "::=",
    "{",
    "docsRphyRpdIfEnetSfpPlusStatusEntry",
    "11",
    "}"
  ],
  "syntax_tree": [
    [
      "ApplicationSyntax",
      "Unsigned32",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    [
      "UNITS",
      "100s of meters"
    ],
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This attribute reports the link length that is supported by the transceiver while operating in compliance with the applicable standards using single mode fiber. The value is in units of 100s of meters. A value of 255 means that the transceiver supports a link length greater than 25.4 km. A value of zero means that the transceiver does not support single mode fiber or that the length information has to be determined from the transceiver technology."
    ],
    null,
    null,
    null,
    null
  ]
}

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2019-01-24.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength100M  OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "100s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
              "This attribute reports the link length that is 
               supported by the transceiver while operating in 
               compliance with the applicable standards using single
               mode fiber. The value is in units of 100s of meters. 
               A value of 255 means that the transceiver supports a link 
               length greater than 25.4 km. A value of zero means that 
               the transceiver does not support single mode fiber or 
               that the length information has to be determined from 
               the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 11 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2019-01-24.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength100M.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.074775+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2019-06-13.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength100M  OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "100s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single
           mode fiber. The value is in units of 100s of meters. 
           A value of 255 means that the transceiver supports a link 
           length greater than 25.4 km. A value of zero means that 
           the transceiver does not support single mode fiber or 
           that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 11 }

  Module imports

  {'IF-MIB': ['InterfaceIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2019-06-13.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength100M.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.180890+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2019-09-26.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength100M  OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "100s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single
           mode fiber. The value is in units of 100s of meters. 
           A value of 255 means that the transceiver supports a link 
           length greater than 25.4 km. A value of zero means that 
           the transceiver does not support single mode fiber or 
           that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 11 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2019-09-26.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength100M.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.289076+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2020-01-09.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength100M  OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "100s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single
           mode fiber. The value is in units of 100s of meters. 
           A value of 255 means that the transceiver supports a link 
           length greater than 25.4 km. A value of zero means that 
           the transceiver does not support single mode fiber or 
           that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 11 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2020-01-09.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength100M.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.938082+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2020-05-21.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength100M  OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "100s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single
           mode fiber. The value is in units of 100s of meters. 
           A value of 255 means that the transceiver supports a link 
           length greater than 25.4 km. A value of zero means that 
           the transceiver does not support single mode fiber or 
           that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 11 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2020-05-21.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength100M.
  Source version and references

  Downloaded: 2026-10-26T22:49:56.205690+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2020-10-01.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength100M  OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "100s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single
           mode fiber. The value is in units of 100s of meters. 
           A value of 255 means that the transceiver supports a link 
           length greater than 25.4 km. A value of zero means that 
           the transceiver does not support single mode fiber or 
           that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 11 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2020-10-01.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength100M.
  Source version and references

  Downloaded: 2026-10-26T22:49:56.354948+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2021-03-11.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength100M  OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "100s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single
           mode fiber. The value is in units of 100s of meters. 
           A value of 255 means that the transceiver supports a link 
           length greater than 25.4 km. A value of zero means that 
           the transceiver does not support single mode fiber or 
           that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 11 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2021-03-11.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength100M.
  Source version and references

  Downloaded: 2026-10-26T22:49:56.429401+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2021-10-21.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength100M  OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "100s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single
           mode fiber. The value is in units of 100s of meters. 
           A value of 255 means that the transceiver supports a link 
           length greater than 25.4 km. A value of zero means that 
           the transceiver does not support single mode fiber or 
           that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 11 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2021-10-21.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength100M.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.003028+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-01-20.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength100M  OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "100s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single
           mode fiber. The value is in units of 100s of meters. 
           A value of 255 means that the transceiver supports a link 
           length greater than 25.4 km. A value of zero means that 
           the transceiver does not support single mode fiber or 
           that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 11 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-01-20.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength100M.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.394938+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-03-31.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength100M  OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "100s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single
           mode fiber. The value is in units of 100s of meters. 
           A value of 255 means that the transceiver supports a link 
           length greater than 25.4 km. A value of zero means that 
           the transceiver does not support single mode fiber or 
           that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 11 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-03-31.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength100M.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.424309+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-06-30.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength100M  OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "100s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single
           mode fiber. The value is in units of 100s of meters. 
           A value of 255 means that the transceiver supports a link 
           length greater than 25.4 km. A value of zero means that 
           the transceiver does not support single mode fiber or 
           that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 11 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-06-30.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength100M.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.542970+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-12-01.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength100M  OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "100s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single
           mode fiber. The value is in units of 100s of meters. 
           A value of 255 means that the transceiver supports a link 
           length greater than 25.4 km. A value of zero means that 
           the transceiver does not support single mode fiber or 
           that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 11 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-12-01.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength100M.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.089920+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2023-10-12.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength100M  OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "100s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single
           mode fiber. The value is in units of 100s of meters. 
           A value of 255 means that the transceiver supports a link 
           length greater than 25.4 km. A value of zero means that 
           the transceiver does not support single mode fiber or 
           that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 11 }

  Module imports

  {'IF-MIB': ['ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['InterfaceIndex', 'TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.

  · Download DOCS-RPHY-MIB-2023-10-12.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength100M.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.579257+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2024-01-18.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength100M  OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "100s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single
           mode fiber. The value is in units of 100s of meters. 
           A value of 255 means that the transceiver supports a link 
           length greater than 25.4 km. A value of zero means that 
           the transceiver does not support single mode fiber or 
           that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 11 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2024-01-18.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength100M.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.575041+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2025-01-23.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength100M  OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "100s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single
           mode fiber. The value is in units of 100s of meters. 
           A value of 255 means that the transceiver supports a link 
           length greater than 25.4 km. A value of zero means that 
           the transceiver does not support single mode fiber or 
           that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 11 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2025-01-23.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength100M.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.705674+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB.mib

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetSfpPlusStatusLength100M  OBJECT-TYPE
      SYNTAX      Unsigned32 (0..255)
      UNITS       "100s of meters"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the link length that is 
           supported by the transceiver while operating in 
           compliance with the applicable standards using single
           mode fiber. The value is in units of 100s of meters. 
           A value of 255 means that the transceiver supports a link 
           length greater than 25.4 km. A value of zero means that 
           the transceiver does not support single mode fiber or 
           that the length information has to be determined from 
           the transceiver technology."
      ::= { docsRphyRpdIfEnetSfpPlusStatusEntry 11 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB.mib
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetSfpPlusStatusLength100M.
  Source version and references

  Downloaded: 2026-10-26T22:47:25.372984+00:00.