Available source records contain 8 distinct definitions; some records may not include a definition.
Show 8 published definitions
eventConfigCompareValue2 · mandatory
eventConfigCompareValue2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If the eventConfigMode is set to hysteresisBound, this object specifies the second comparison value for
the hysteresis. If the eventConfigMode is set to greaterThanValue or smallerThanValue, this object
specifies the time (in tenth of seconds) for which the comparison must be true prior to the event condition
becoming true. If the eventConfigMode is set to onChange or periodic, the value of this object shall be
ignored."
::= { eventLogConfigEntry 5 }eventConfigCompareValue2 · deprecated
eventConfigCompareValue2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"<Definition>If the eventConfigMode is set to
hysteresisBound, this object specifies the second comparison
value for the hysteresis. If the eventConfigMode is set to
greaterThanValue, smallerThanValue, or andedWithValue, this
object specifies the time (in tenths of seconds, +1 tenth / -0
tenths) for which the samples used for comparison shall be
true prior to the event condition becoming true. If the
eventConfigMode is set to onChange or periodic, the value of
this object shall be ignored.
The amount of time the condition shall be true is measured in
tenths of a second. The accuracy of this timer is limited to
+1 tenth of a second and:0 tenths of a second. If the event
is true for at least the time shown in this parameter +1
tenth of a second, the condition shall trigger a log entry.
It is recognized that some designs only sample the condition
periodically, in which case the condition shall be true for
at least the time indicated by this object before the event
becomes true and the event shall always become true if the
condition is true for a duration equal to the value shown in
this object plus 1 tenth of a second.
<Superseded by> COND-TRIGGER-MIB.fdCondTriggerValue2 (ISO 20684-3)
<Object Identifier> 1.3.6.1.4.1.1206.4.2.6.4.2.1.5"
DEFVAL {0}
::= { eventLogConfigEntry 5 }eventConfigCompareValue2 · mandatory
eventConfigCompareValue2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"<Definition>If the eventConfigMode is set to hysteresisBound, this object specifies the
second comparison value for the hysteresis. If the eventConfigMode is set to
greaterThanValue, smallerThanValue, or andedWithValue, this object specifies the time
(in tenth of seconds, +1 tenth / -0 tenths) for which the samples used for comparison
must be true prior to the event condition becoming true. If the eventConfigMode is set to
onChange or periodic, the value of this object shall be ignored.
The amount of time the condition must be true is measured in tenths of a second. The
accuracy of this timer is limited to +1 tenth of a second and –0 tenths of a second. If the
event is true for at least the time shown in this parameter +1 tenth of a second, the
condition shall trigger a log entry. It is recognized that some designs only sample the
condition periodically, in which case the condition must be true for at least the time
indicated by this object before the event becomes true and the event shall always
become true if the condition is true for a duration equal to the value shown in this object
plus 1 tenth of a second.
<DescriptiveName>EventType.compareValue2:number
<DataConceptType>Data Element"
DEFVAL {0}
::= { eventLogConfigEntry 5 }eventConfigCompareValue2 · deprecated
eventConfigCompareValue2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"<Definition>If the eventConfigMode is set to hysteresisBound, this object
specifies the second comparison value for the hysteresis. If the
eventConfigMode is set to greaterThanValue, smallerThanValue, or
andedWithValue, this object specifies the time (in tenths of seconds, +1
tenth / -0 tenths) for which the samples used for comparison shall be true
prior to the event condition becoming true. If the eventConfigMode is set
to onChange or periodic, the value of this object shall be ignored.
The amount of time the condition shall be true is measured in tenths of a
second. The accuracy of this timer is limited to +1 tenth of a second and:0
tenths of a second. If the event is true for at least the time shown in
this parameter +1 tenth of a second, the condition shall trigger a log
entry. It is recognized that some designs only sample the condition
periodically, in which case the condition shall be true for at least the
time indicated by this object before the event becomes true and the event
shall always become true if the condition is true for a duration equal to
the value shown in this object plus 1 tenth of a second.
<Supplanted by> ISO26048-1-CondTrigger.fdCondTriggerValue2 (ISO 26048-1)
<Object Identifier> 1.3.6.1.4.1.1206.4.2.6.4.2.1.5"
DEFVAL { 0 }
::= { eventLogConfigEntry 5 }eventConfigCompareValue2 · mandatory
eventConfigCompareValue2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"<Definition>If the eventConfigMode is set to hysteresisBound, this object specifies the second comparison value for the hysteresis. If the eventConfigMode is set to greaterThanValue or smallerThanValue, this object specifies the time (in tenth of seconds) for which the comparison must be true prior to the event condition becoming true (the value shall be reported in tenths of seconds, per the original specification, but the accurracy shall be plus/minus one second due to implementation experience). If the eventConfigMode is set to onChange or periodic, the value of this object shall be ignored.
<DescriptiveName>EventType.compareValue2:number
<DataConceptType>Data Element"
DEFVAL {0}
::= { eventLogConfigEntry 5 }eventConfigCompareValue2 · mandatory
eventConfigCompareValue2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"<Definition>If the eventConfigMode is set to hysteresisBound,
this object specifies the second comparison value for the
hysteresis. If the eventConfigMode is set to greaterThanValue or
smallerThanValue, this object specifies the time (in tenth of
seconds) for which the comparison must be true prior to the event
condition becoming true (the value shall be reported in tenths of
seconds, per the original specification, but the accurracy shall
be plus/minus one second due to implementation experience). If
the eventConfigMode is set to onChange or periodic, the value of
this object shall be ignored.
<DescriptiveName>EventType.compareValue2:number
<DataConceptType>Data Element"
DEFVAL {0}
::= { eventLogConfigEntry 5 }eventConfigCompareValue2 · mandatory
eventConfigCompareValue2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"<Definition>If the eventConfigMode is set to
hysteresisBound, this object specifies the second comparison
value for the hysteresis. If the eventConfigMode is set to
greaterThanValue, smallerThanValue, or andedWithValue, this
object specifies the time (in tenths of seconds, +1 tenth / -0
tenths) for which the samples used for comparison shall be
true prior to the event condition becoming true. If the
eventConfigMode is set to onChange or periodic, the value of
this object shall be ignored.
The amount of time the condition shall be true is measured in
tenths of a second. The accuracy of this timer is limited to
+1 tenth of a second and –0 tenths of a second. If the event
is true for at least the time shown in this parameter +1
tenth of a second, the condition shall trigger a log entry.
It is recognized that some designs only sample the condition
periodically, in which case the condition shall be true for
at least the time indicated by this object before the event
becomes true and the event shall always become true if the
condition is true for a duration equal to the value shown in
this object plus 1 tenth of a second.
<Object Identifier> 1.3.6.1.4.1.1206.4.2.6.4.2.1.5
"
DEFVAL {0}
::= { eventLogConfigEntry 5 }eventConfigCompareValue2 · mandatory
eventConfigCompareValue2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"<Definition>If the eventConfigMode is set to
hysteresisBound, this object specifies the second comparison
value for the hysteresis. If the eventConfigMode is set to
greaterThanValue, smallerThanValue, or andedWithValue, this
object specifies the time (in tenth of seconds, +1 tenth / -0
tenths) for which the samples used for comparison must be
true prior to the event condition becoming true. If the
eventConfigMode is set to onChange or periodic, the value of
this object shall be ignored.
The amount of time the condition must be true is measured in
tenths of a second. The accuracy of this timer is limited to
+1 tenth of a second and –0 tenths of a second. If the event
is true for at least the time shown in this parameter +1
tenth of a second, the condition shall trigger a log entry.
It is recognized that some designs only sample the condition
periodically, in which case the condition must be true for
at least the time indicated by this object before the event
becomes true and the event shall always become true if the
condition is true for a duration equal to the value shown in
this object plus 1 tenth of a second.
<Object Identifier> 1.3.6.1.4.1.1206.4.2.6.4.2.1.5
"
DEFVAL {0}
::= { eventLogConfigEntry 5 }