Each row entry represents a configured sonet path in a packet
over Sonet port on a IOM card in a chassis in the system.
The tmnxSonetPathEntry contains attributes that are
unique to a sonet path of a 'sonet' TmnxPortType. The
tmnxPortPortID for a sonet port includes a sonet path number
in the lower bits. If the sonet path number is zero, '0', it
represents a single (clear) sonet path on the port that uses
the full bandwidth of the sonet port. Entries in this table
that have the sonet path number part of their tmnxPortPortID
index value set to zero cannot be created and deleted via
SNMP SET operations. They are created by the SNMP agent
when the corresponding entry in the tmnxSonetTable is
created.
Entries with non-zero sonet path numbers can be created and
deleted via SNMP SET operations using tmnxSonetPathRowStatus.
When a row is created in the tmnxSonetPathTable, the
agent also creates a row with the same index values in the
tmnxPortTable. In order to delete an entry,
tmnxPortAdminStatus must first be set to 'outOfService'. When
the tmnxSonetPathEntry is deleted, the agent also deletes
the corresponding row in the tmnxPortTable.
Parsed from file TIMETRA-PORT-MIB.mib
Module: TIMETRA-PORT-MIB
tmnxSonetPathEntry OBJECT-TYPE SYNTAX TmnxSonetPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a configured sonet path in a packet over Sonet port on a IOM card in a chassis in the system. The tmnxSonetPathEntry contains attributes that are unique to a sonet path of a 'sonet' TmnxPortType. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero, '0', it represents a single (clear) sonet path on the port that uses the full bandwidth of the sonet port. Entries in this table that have the sonet path number part of their tmnxPortPortID index value set to zero cannot be created and deleted via SNMP SET operations. They are created by the SNMP agent when the corresponding entry in the tmnxSonetTable is created. Entries with non-zero sonet path numbers can be created and deleted via SNMP SET operations using tmnxSonetPathRowStatus. When a row is created in the tmnxSonetPathTable, the agent also creates a row with the same index values in the tmnxPortTable. In order to delete an entry, tmnxPortAdminStatus must first be set to 'outOfService'. When the tmnxSonetPathEntry is deleted, the agent also deletes the corresponding row in the tmnxPortTable." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { tmnxSonetPathTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.1 | tmnxSonetPathRowStatus | 0 | 0 | tmnxSonetPathRowStatus controls the creation and deletion of row entries in the tmnxSonetPathTable. The tmnxPortPortID for a sone… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.2 | tmnxSonetPathLastChangeTime | 0 | 0 | The tmnxSonetPathLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnx… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.3 | tmnxSonetPathMTU | 0 | 0 | The size of the largest packet which can be sent/received on the sonet path, specified in octets. For paths that are used for tr… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.4 | tmnxSonetPathScramble | 0 | 0 | If the tmnxSonetPathScramble variable is set to 'true', SONET (SDH) payload scrambling is enabled on this sonet path. Both ends o… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.5 | tmnxSonetPathC2Byte | 0 | 0 | The tmnxSonetPathC2Byte variable is used configure the value used in the SONET/SDH C2 header byte. For paths on an MDA that does… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.6 | tmnxSonetPathJ1String | 0 | 0 | The tmnxSonetPathJ1String variable is used to configure the sonet path trace string to be sent in the J1 Path Overhead bytes. Th… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.7 | tmnxSonetPathCRC | 0 | 0 | The value of tmnxSonetPathCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CR… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.8 | tmnxSonetPathOperMTU | 0 | 0 | The negotiated size of the largest packet which can be sent on the sonet path, specified in octets. For sonet paths that are us… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.9 | tmnxSonetPathOperMRU | 0 | 0 | The negotiated size of the largest packet that can be received on the sonet path, specified in octets. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.10 | tmnxSonetPathReportAlarm | 0 | 0 | The value of tmnxSonetPathReportAlarm determines when and if to generate tmnxEqPortSonetPathAlarm and tmnxEqPortSonetPathAlarmCl… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.11 | tmnxSonetPathAcctPolicyId | 0 | 0 | The value of the accounting policy must be defined prior to associating the policy with the sonet path. Accounting policies can … |
| 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.12 | tmnxSonetPathCollectStats | 0 | 0 | Enable/disable the collection of accounting and statistical data for the network sonet path. When applying accounting policies t… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.13 | tmnxSonetPathReportAlarmStatus | 0 | 0 | The bits in this object are used for indicating the alarms. The bits are explained as follows: pais(1) Indicates path alarm i… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.14 | tmnxSonetPathMonC2Byte | 0 | 0 | The tmnxSonetPathC2Byte variable reports the value in the SONET/SDH C2 header byte. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.15 | tmnxSonetPathMonJ1String | 0 | 0 | The tmnxSonetPathJ1String variable reports the sonet path trace string received in the J1 Path Overhead bytes. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.16 | tmnxSonetPathType | 0 | 0 | tmnxSonetPathType specifies if the associated SONET/SDH Path is an asynchronous circuit, a virtual tributary group or a tributary… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.6.1.17 | tmnxSonetPathChildType | 0 | 0 | tmnxSonetPathChildType is used to configure the type of this path. Some typical default values are: pdhDs3 for STS-1 paths pdhE3 f… |