The value of tmnxSonetPathReportAlarm determines when and if to
generate tmnxEqPortSonetPathAlarm and tmnxEqPortSonetPathAlarmClear
notifications for this port:
pais(1) Reports path alarm indication signal errors. Not set by
default.
plop(2) Reports path loss of pointer (per tributary) errors.
Set by default.
prdi(3) Reports path remote defect indication errors. Not set
by default.
pb3err(4) Reports path B3 errors. Not set by default.
pplm(5) Reports a path payload mismatch. As a result the
path will be operationally downed. Set by default.
prei(6) Reports a path error condition raised by the remote as
a result of B3 errors received from this node. Not
set by default.
puneq(7) Reports unequipped path errors. Set by default.
plcd(8) Reports path loss of codegroup delineation error.
It is applicable only when the value of
tmnxPortEtherXGigMode is set to 'wan'.
Not set by default.
Parsed from file TIMETRA-PORT-MIB.mib
Module: TIMETRA-PORT-MIB
tmnxSonetPathReportAlarm OBJECT-TYPE SYNTAX BITS { notUsed (0), pais(1), plop(2), prdi(3), pb3err(4), pplm(5), prei(6), puneq(7), plcd(8) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxSonetPathReportAlarm determines when and if to generate tmnxEqPortSonetPathAlarm and tmnxEqPortSonetPathAlarmClear notifications for this port: pais(1) Reports path alarm indication signal errors. Not set by default. plop(2) Reports path loss of pointer (per tributary) errors. Set by default. prdi(3) Reports path remote defect indication errors. Not set by default. pb3err(4) Reports path B3 errors. Not set by default. pplm(5) Reports a path payload mismatch. As a result the path will be operationally downed. Set by default. prei(6) Reports a path error condition raised by the remote as a result of B3 errors received from this node. Not set by default. puneq(7) Reports unequipped path errors. Set by default. plcd(8) Reports path loss of codegroup delineation error. It is applicable only when the value of tmnxPortEtherXGigMode is set to 'wan'. Not set by default. " DEFVAL { {plop, pplm, puneq} } ::= { tmnxSonetPathEntry 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.1 | tmnxSonetPathRowStatus | 0 | 0 | tmnxSonetPathRowStatus controls the creation and deletion of row entries in the tmnxSonetPathTable. The tmnxPortPortID for a sone… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.2 | tmnxSonetPathLastChangeTime | 0 | 0 | The tmnxSonetPathLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnx… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.3 | tmnxSonetPathMTU | 0 | 0 | The size of the largest packet which can be sent/received on the sonet path, specified in octets. For paths that are used for tr… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.4 | tmnxSonetPathScramble | 0 | 0 | If the tmnxSonetPathScramble variable is set to 'true', SONET (SDH) payload scrambling is enabled on this sonet path. Both ends o… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.5 | tmnxSonetPathC2Byte | 0 | 0 | The tmnxSonetPathC2Byte variable is used configure the value used in the SONET/SDH C2 header byte. For paths on an MDA that does… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.6 | tmnxSonetPathJ1String | 0 | 0 | The tmnxSonetPathJ1String variable is used to configure the sonet path trace string to be sent in the J1 Path Overhead bytes. Th… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.7 | tmnxSonetPathCRC | 0 | 0 | The value of tmnxSonetPathCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CR… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.8 | tmnxSonetPathOperMTU | 0 | 0 | The negotiated size of the largest packet which can be sent on the sonet path, specified in octets. For sonet paths that are us… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.9 | tmnxSonetPathOperMRU | 0 | 0 | The negotiated size of the largest packet that can be received on the sonet path, specified in octets. |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.11 | tmnxSonetPathAcctPolicyId | 0 | 0 | The value of the accounting policy must be defined prior to associating the policy with the sonet path. Accounting policies can … |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.12 | tmnxSonetPathCollectStats | 0 | 0 | Enable/disable the collection of accounting and statistical data for the network sonet path. When applying accounting policies t… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.13 | tmnxSonetPathReportAlarmStatus | 0 | 0 | The bits in this object are used for indicating the alarms. The bits are explained as follows: pais(1) Indicates path alarm i… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.14 | tmnxSonetPathMonC2Byte | 0 | 0 | The tmnxSonetPathC2Byte variable reports the value in the SONET/SDH C2 header byte. |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.15 | tmnxSonetPathMonJ1String | 0 | 0 | The tmnxSonetPathJ1String variable reports the sonet path trace string received in the J1 Path Overhead bytes. |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.16 | tmnxSonetPathType | 0 | 0 | tmnxSonetPathType specifies if the associated SONET/SDH Path is an asynchronous circuit, a virtual tributary group or a tributary… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.17 | tmnxSonetPathChildType | 0 | 0 | tmnxSonetPathChildType is used to configure the type of this path. Some typical default values are: pdhDs3 for STS-1 paths pdhE3 f… |