The tmnxSonetPathC2Byte variable is used configure the value
used in the SONET/SDH C2 header byte.
For paths on an MDA that does not support channelization:
Setting C2 equal to 0x16 indicates scrambled sonet.
Setting C2 equal to 0xCF indicates unscrambled sonet.
Setting C2 equal to 0x13 indicates ATM.
For paths on an MDA that supports channelization, the default
value is based on the value of tmnxMDAMaxChannelization.
For 'pdhDs3' or 'pdhE3' channelization, the default value is 0x04.
Setting tmnxSonetPathC2Byte to a value of zero(0) causes the agent
to assign the default value to this object.
Parsed from file TIMETRA-PORT-MIB.mib
Module: TIMETRA-PORT-MIB
tmnxSonetPathC2Byte OBJECT-TYPE SYNTAX Unsigned32 (0..254) MAX-ACCESS read-create STATUS current DESCRIPTION "The tmnxSonetPathC2Byte variable is used configure the value used in the SONET/SDH C2 header byte. For paths on an MDA that does not support channelization: Setting C2 equal to 0x16 indicates scrambled sonet. Setting C2 equal to 0xCF indicates unscrambled sonet. Setting C2 equal to 0x13 indicates ATM. For paths on an MDA that supports channelization, the default value is based on the value of tmnxMDAMaxChannelization. For 'pdhDs3' or 'pdhE3' channelization, the default value is 0x04. Setting tmnxSonetPathC2Byte to a value of zero(0) causes the agent to assign the default value to this object." ::= { tmnxSonetPathEntry 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.1 | tmnxSonetPathRowStatus | 0 | 0 | tmnxSonetPathRowStatus controls the creation and deletion of row entries in the tmnxSonetPathTable. The tmnxPortPortID for a sone… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.2 | tmnxSonetPathLastChangeTime | 0 | 0 | The tmnxSonetPathLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnx… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.3 | tmnxSonetPathMTU | 0 | 0 | The size of the largest packet which can be sent/received on the sonet path, specified in octets. For paths that are used for tr… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.4 | tmnxSonetPathScramble | 0 | 0 | If the tmnxSonetPathScramble variable is set to 'true', SONET (SDH) payload scrambling is enabled on this sonet path. Both ends o… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.6 | tmnxSonetPathJ1String | 0 | 0 | The tmnxSonetPathJ1String variable is used to configure the sonet path trace string to be sent in the J1 Path Overhead bytes. Th… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.7 | tmnxSonetPathCRC | 0 | 0 | The value of tmnxSonetPathCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CR… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.8 | tmnxSonetPathOperMTU | 0 | 0 | The negotiated size of the largest packet which can be sent on the sonet path, specified in octets. For sonet paths that are us… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.9 | tmnxSonetPathOperMRU | 0 | 0 | The negotiated size of the largest packet that can be received on the sonet path, specified in octets. |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.10 | tmnxSonetPathReportAlarm | 0 | 0 | The value of tmnxSonetPathReportAlarm determines when and if to generate tmnxEqPortSonetPathAlarm and tmnxEqPortSonetPathAlarmCl… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.11 | tmnxSonetPathAcctPolicyId | 0 | 0 | The value of the accounting policy must be defined prior to associating the policy with the sonet path. Accounting policies can … |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.12 | tmnxSonetPathCollectStats | 0 | 0 | Enable/disable the collection of accounting and statistical data for the network sonet path. When applying accounting policies t… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.13 | tmnxSonetPathReportAlarmStatus | 0 | 0 | The bits in this object are used for indicating the alarms. The bits are explained as follows: pais(1) Indicates path alarm i… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.14 | tmnxSonetPathMonC2Byte | 0 | 0 | The tmnxSonetPathC2Byte variable reports the value in the SONET/SDH C2 header byte. |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.15 | tmnxSonetPathMonJ1String | 0 | 0 | The tmnxSonetPathJ1String variable reports the sonet path trace string received in the J1 Path Overhead bytes. |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.16 | tmnxSonetPathType | 0 | 0 | tmnxSonetPathType specifies if the associated SONET/SDH Path is an asynchronous circuit, a virtual tributary group or a tributary… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.17 | tmnxSonetPathChildType | 0 | 0 | tmnxSonetPathChildType is used to configure the type of this path. Some typical default values are: pdhDs3 for STS-1 paths pdhE3 f… |