The value of tmnxSonetPathCRC variable indicates the precision of
the cyclic redundancy check. A value of 'crc16' is a 16-bit
CRC calculation. A value of 'crc32' is a 32-bit CRC
calculation. 32-bit CRC increases the error detection ability,
but it also adds some performance overhead.
For paths with encapsulation set to ATM the default and only
supported value is crc32 and applies to AAL5 CRC calculations
on that path.
Parsed from file TIMETRA-PORT-MIB.mib
Module: TIMETRA-PORT-MIB
tmnxSonetPathCRC OBJECT-TYPE SYNTAX INTEGER { crc16 (1), crc32 (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxSonetPathCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead. For paths with encapsulation set to ATM the default and only supported value is crc32 and applies to AAL5 CRC calculations on that path." DEFVAL { crc32 } ::= { tmnxSonetPathEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.1 | tmnxSonetPathRowStatus | 0 | 0 | tmnxSonetPathRowStatus controls the creation and deletion of row entries in the tmnxSonetPathTable. The tmnxPortPortID for a sone… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.2 | tmnxSonetPathLastChangeTime | 0 | 0 | The tmnxSonetPathLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnx… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.3 | tmnxSonetPathMTU | 0 | 0 | The size of the largest packet which can be sent/received on the sonet path, specified in octets. For paths that are used for tr… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.4 | tmnxSonetPathScramble | 0 | 0 | If the tmnxSonetPathScramble variable is set to 'true', SONET (SDH) payload scrambling is enabled on this sonet path. Both ends o… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.5 | tmnxSonetPathC2Byte | 0 | 0 | The tmnxSonetPathC2Byte variable is used configure the value used in the SONET/SDH C2 header byte. For paths on an MDA that does… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.6 | tmnxSonetPathJ1String | 0 | 0 | The tmnxSonetPathJ1String variable is used to configure the sonet path trace string to be sent in the J1 Path Overhead bytes. Th… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.8 | tmnxSonetPathOperMTU | 0 | 0 | The negotiated size of the largest packet which can be sent on the sonet path, specified in octets. For sonet paths that are us… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.9 | tmnxSonetPathOperMRU | 0 | 0 | The negotiated size of the largest packet that can be received on the sonet path, specified in octets. |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.10 | tmnxSonetPathReportAlarm | 0 | 0 | The value of tmnxSonetPathReportAlarm determines when and if to generate tmnxEqPortSonetPathAlarm and tmnxEqPortSonetPathAlarmCl… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.11 | tmnxSonetPathAcctPolicyId | 0 | 0 | The value of the accounting policy must be defined prior to associating the policy with the sonet path. Accounting policies can … |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.12 | tmnxSonetPathCollectStats | 0 | 0 | Enable/disable the collection of accounting and statistical data for the network sonet path. When applying accounting policies t… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.13 | tmnxSonetPathReportAlarmStatus | 0 | 0 | The bits in this object are used for indicating the alarms. The bits are explained as follows: pais(1) Indicates path alarm i… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.14 | tmnxSonetPathMonC2Byte | 0 | 0 | The tmnxSonetPathC2Byte variable reports the value in the SONET/SDH C2 header byte. |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.15 | tmnxSonetPathMonJ1String | 0 | 0 | The tmnxSonetPathJ1String variable reports the sonet path trace string received in the J1 Path Overhead bytes. |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.16 | tmnxSonetPathType | 0 | 0 | tmnxSonetPathType specifies if the associated SONET/SDH Path is an asynchronous circuit, a virtual tributary group or a tributary… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.17 | tmnxSonetPathChildType | 0 | 0 | tmnxSonetPathChildType is used to configure the type of this path. Some typical default values are: pdhDs3 for STS-1 paths pdhE3 f… |