The bits in this object are used for indicating the alarms. The bits
are explained as follows:
pais(1) Indicates path alarm indication signal errors.
plop(2) Indicates path loss of pointer (per tributary) errors.
prdi(3) Indicates path remote defect indication errors.
pb3err(4) Indicates path B3 errors.
pplm(5) Indicates a path payload mismatch.
prei(6) Indicates a path error condition raised by the remote as
a result of B3 errors received from this node.
puneq(7) Indicates a far-end unequipped error.
plcd(8) Indicates a path loss of codegroup delineation error.
It is applicable only when the value of
tmnxPortEtherXGigMode is set to 'wan'.
Not set by default.
Parsed from file TIMETRA-PORT-MIB.mib
Module: TIMETRA-PORT-MIB
tmnxSonetPathReportAlarmStatus OBJECT-TYPE SYNTAX BITS { notUsed (0), pais(1), plop(2), prdi(3), pb3err(4), pplm(5), prei(6), puneq(7), plcd(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The bits in this object are used for indicating the alarms. The bits are explained as follows: pais(1) Indicates path alarm indication signal errors. plop(2) Indicates path loss of pointer (per tributary) errors. prdi(3) Indicates path remote defect indication errors. pb3err(4) Indicates path B3 errors. pplm(5) Indicates a path payload mismatch. prei(6) Indicates a path error condition raised by the remote as a result of B3 errors received from this node. puneq(7) Indicates a far-end unequipped error. plcd(8) Indicates a path loss of codegroup delineation error. It is applicable only when the value of tmnxPortEtherXGigMode is set to 'wan'. Not set by default. " ::= { tmnxSonetPathEntry 13 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.1 | tmnxSonetPathRowStatus | 0 | 0 | tmnxSonetPathRowStatus controls the creation and deletion of row entries in the tmnxSonetPathTable. The tmnxPortPortID for a sone… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.2 | tmnxSonetPathLastChangeTime | 0 | 0 | The tmnxSonetPathLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnx… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.3 | tmnxSonetPathMTU | 0 | 0 | The size of the largest packet which can be sent/received on the sonet path, specified in octets. For paths that are used for tr… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.4 | tmnxSonetPathScramble | 0 | 0 | If the tmnxSonetPathScramble variable is set to 'true', SONET (SDH) payload scrambling is enabled on this sonet path. Both ends o… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.5 | tmnxSonetPathC2Byte | 0 | 0 | The tmnxSonetPathC2Byte variable is used configure the value used in the SONET/SDH C2 header byte. For paths on an MDA that does… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.6 | tmnxSonetPathJ1String | 0 | 0 | The tmnxSonetPathJ1String variable is used to configure the sonet path trace string to be sent in the J1 Path Overhead bytes. Th… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.7 | tmnxSonetPathCRC | 0 | 0 | The value of tmnxSonetPathCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CR… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.8 | tmnxSonetPathOperMTU | 0 | 0 | The negotiated size of the largest packet which can be sent on the sonet path, specified in octets. For sonet paths that are us… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.9 | tmnxSonetPathOperMRU | 0 | 0 | The negotiated size of the largest packet that can be received on the sonet path, specified in octets. |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.10 | tmnxSonetPathReportAlarm | 0 | 0 | The value of tmnxSonetPathReportAlarm determines when and if to generate tmnxEqPortSonetPathAlarm and tmnxEqPortSonetPathAlarmCl… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.11 | tmnxSonetPathAcctPolicyId | 0 | 0 | The value of the accounting policy must be defined prior to associating the policy with the sonet path. Accounting policies can … |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.12 | tmnxSonetPathCollectStats | 0 | 0 | Enable/disable the collection of accounting and statistical data for the network sonet path. When applying accounting policies t… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.14 | tmnxSonetPathMonC2Byte | 0 | 0 | The tmnxSonetPathC2Byte variable reports the value in the SONET/SDH C2 header byte. |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.15 | tmnxSonetPathMonJ1String | 0 | 0 | The tmnxSonetPathJ1String variable reports the sonet path trace string received in the J1 Path Overhead bytes. |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.16 | tmnxSonetPathType | 0 | 0 | tmnxSonetPathType specifies if the associated SONET/SDH Path is an asynchronous circuit, a virtual tributary group or a tributary… |
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.17 | tmnxSonetPathChildType | 0 | 0 | tmnxSonetPathChildType is used to configure the type of this path. Some typical default values are: pdhDs3 for STS-1 paths pdhE3 f… |