mscAtmIfFaultHoldOfftime
View at oid-info.com
This attribute specifies the delay before faults detected at the VP
layer are propagated to the VC layer, and thus to the application
using the connection.
If the value is 0 (zero), applications using a VirtualPathTerminator
are immediately notified of faults detected by the VP. Using this
value allows these applications to be advised of faults without
requiring loopbacks on each Vcc. Typically, the application goes out
of service when advised of a fault.
If the value is infinity, applications are not notified of VP layer
faults. Using this value allows the applications to survive transient
VP layer fault conditions.
The value chosen applies only to Vpts and Vccs directly beneath a
Vpt.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the delay before faults detected at the VP
layer are propagated to the VC layer, and thus to the application
using the connection.
If the value is 0 (zero), applications using a VirtualPathTerminator
are immediately notified of faults detected by the VP. Using this
value allows these applications to be advised of faults without
requiring loopbacks on each Vcc. Typically, the application goes out
of service when advised of a fault.
If the value is infinity, applications are not notified of VP layer
faults. Using this value allows the applications to survive transient
VP layer fault conditions.
The value chosen applies only to Vpts and Vccs directly beneath a
Vpt.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfFaultHoldOffTime OBJECT-TYPE SYNTAX INTEGER { n0(0), infinity(65535) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the delay before faults detected at the VP layer are propagated to the VC layer, and thus to the application using the connection. If the value is 0 (zero), applications using a VirtualPathTerminator are immediately notified of faults detected by the VP. Using this value allows these applications to be advised of faults without requiring loopbacks on each Vcc. Typically, the application goes out of service when advised of a fault. If the value is infinity, applications are not notified of VP layer faults. Using this value allows the applications to survive transient VP layer fault conditions. The value chosen applies only to Vpts and Vccs directly beneath a Vpt." DEFVAL { infinity } ::= { mscAtmIfProvEntry 100 }
mscAtmIfFaultHoldOffTime OBJECT-TYPE SYNTAX INTEGER { n0(0), infinity(65535) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the delay before faults detected at the VP layer are propagated to the VC layer, and thus to the application using the connection. If the value is 0 (zero), applications using a VirtualPathTerminator are immediately notified of faults detected by the VP. Using this value allows these applications to be advised of faults without requiring loopbacks on each Vcc. Typically, the application goes out of service when advised of a fault. If the value is infinity, applications are not notified of VP layer faults. Using this value allows the applications to survive transient VP layer fault conditions. The value chosen applies only to Vpts and Vccs directly beneath a Vpt." DEFVAL { infinity } ::= { mscAtmIfProvEntry 100 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.110.1.10 | mscAtmIfInterfaceName | 0 | 0 | This attribute associates the AtmIf component with a specific interface on a Function Processorfor example, Lp/1 Ds3/0. This impl… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.20 | mscAtmIfType | 0 | 0 | mscAtmIftype |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.30 | mscAtmIfOamSegmentBoundary | 0 | 0 | This attribute specifies whether the interface is on an OAM segment boundary. When yes is selected, the interface is on an OAM s… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.40 | mscAtmIfMaxVpcs | 0 | 0 | This attribute specifies the maximum number of VPCs that can be configured on this AtmIf. The value must not exceed the total num… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.50 | mscAtmIfMaxVccs | 0 | 0 | This attribute specifies the maximum number of usable VCCs that can be configured on this AtmIf. The value must not exceed the nu… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.60 | mscAtmIfTrafficShaping | 0 | 0 | mscAtmIftrafficShaping |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.70 | mscAtmIfUnshapedTransmitQueueing | 0 | 0 | It is migrated in P6.0 to the attributes of the same name under each ATM service category component of the AtmIf CA. This attrib… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.80 | mscAtmIfUsageParameterControl | 0 | 0 | It is migrated in P6.0 to the attributes of the same name under each ATM service category component of the AtmIf CA. This attrib… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.85 | mscAtmIfMaxVpiBits | 0 | 0 | This attribute specifies the maximum number of VPI bits that may be active for this AtmIf. These bits start at the least signifi… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.90 | mscAtmIfRemoteAtmInterfaceLabel | 0 | 0 | This attribute specifies a unique indication of the remote ATM service or interface component connected to this one. The value o… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.91 | mscAtmIfTxCellMemory | 0 | 0 | mscAtmIftxCellMemory |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.110 | mscAtmIfCtdCalculation | 0 | 0 | This attribute specifies whether cell transfer delay calculation should be performed on loopback cells for each SPVC and SPVP con… |