mscAtmIftrafficShaping
View at oid-info.com
It is migrated in P6.0 to a combination of the trafficShaping
attributes and the emissionPriority attributes under each ATM
service category component of the AtmIf CA.
This attribute defines whether traffic shaping is enabled or disabled
for the entire AtmIf. When this attribute is set to enabled, each
provisioned connection under the interface can be individually
provisioned to permit or prohibit traffic shaping. When this attribute
is set to disabled, no traffic shaping is performed on the transmit
path for any of the connections. This attribute may be set to enabled
if the interface supports shaping, as defined by the
perVcQueueInterfaces attribute in the AtmResourceControl
component. If the AtmResourceControl component does not exist,
this attribute may not be set to enabled.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
It is migrated in P6.0 to a combination of the trafficShaping
attributes and the emissionPriority attributes under each ATM
service category component of the AtmIf CA.
This attribute defines whether traffic shaping is enabled or disabled
for the entire AtmIf. When this attribute is set to enabled, each
provisioned connection under the interface can be individually
provisioned to permit or prohibit traffic shaping. When this attribute
is set to disabled, no traffic shaping is performed on the transmit
path for any of the connections. This attribute may be set to enabled
if the interface supports shaping, as defined by the
perVcQueueInterfaces attribute in the AtmResourceControl
component. If the AtmResourceControl component does not exist,
this attribute may not be set to enabled.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfTrafficShaping OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } ACCESS read-write STATUS obsolete DESCRIPTION "It is migrated in P6.0 to a combination of the trafficShaping attributes and the emissionPriority attributes under each ATM service category component of the AtmIf CA. This attribute defines whether traffic shaping is enabled or disabled for the entire AtmIf. When this attribute is set to enabled, each provisioned connection under the interface can be individually provisioned to permit or prohibit traffic shaping. When this attribute is set to disabled, no traffic shaping is performed on the transmit path for any of the connections. This attribute may be set to enabled if the interface supports shaping, as defined by the perVcQueueInterfaces attribute in the AtmResourceControl component. If the AtmResourceControl component does not exist, this attribute may not be set to enabled." DEFVAL { disabled } ::= { mscAtmIfProvEntry 60 }
mscAtmIfTrafficShaping OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } ACCESS read-write STATUS obsolete DESCRIPTION "It is migrated in P6.0 to a combination of the trafficShaping attributes and the emissionPriority attributes under each ATM service category component of the AtmIf CA. This attribute defines whether traffic shaping is enabled or disabled for the entire AtmIf. When this attribute is set to enabled, each provisioned connection under the interface can be individually provisioned to permit or prohibit traffic shaping. When this attribute is set to disabled, no traffic shaping is performed on the transmit path for any of the connections. This attribute may be set to enabled if the interface supports shaping, as defined by the perVcQueueInterfaces attribute in the AtmResourceControl component. If the AtmResourceControl component does not exist, this attribute may not be set to enabled." DEFVAL { disabled } ::= { mscAtmIfProvEntry 60 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.114.110.1.10 | mscAtmIfInterfaceName | 0 | 0 | This attribute associates the AtmIf component with a specific interface on a Function Processorfor example, Lp/1 Ds3/0. This impl… |
1.3.6.1.4.1.562.36.2.1.114.110.1.20 | mscAtmIfType | 0 | 0 | mscAtmIftype |
1.3.6.1.4.1.562.36.2.1.114.110.1.30 | mscAtmIfOamSegmentBoundary | 0 | 0 | This attribute specifies whether the interface is on an OAM segment boundary. When yes is selected, the interface is on an OAM s… |
1.3.6.1.4.1.562.36.2.1.114.110.1.40 | mscAtmIfMaxVpcs | 0 | 0 | This attribute specifies the maximum number of VPCs that can be configured on this AtmIf. The value must not exceed the total num… |
1.3.6.1.4.1.562.36.2.1.114.110.1.50 | mscAtmIfMaxVccs | 0 | 0 | This attribute specifies the maximum number of usable VCCs that can be configured on this AtmIf. The value must not exceed the nu… |
1.3.6.1.4.1.562.36.2.1.114.110.1.70 | mscAtmIfUnshapedTransmitQueueing | 0 | 0 | It is migrated in P6.0 to the attributes of the same name under each ATM service category component of the AtmIf CA. This attrib… |
1.3.6.1.4.1.562.36.2.1.114.110.1.80 | mscAtmIfUsageParameterControl | 0 | 0 | It is migrated in P6.0 to the attributes of the same name under each ATM service category component of the AtmIf CA. This attrib… |
1.3.6.1.4.1.562.36.2.1.114.110.1.85 | mscAtmIfMaxVpiBits | 0 | 0 | This attribute specifies the maximum number of VPI bits that may be active for this AtmIf. These bits start at the least signifi… |
1.3.6.1.4.1.562.36.2.1.114.110.1.90 | mscAtmIfRemoteAtmInterfaceLabel | 0 | 0 | This attribute specifies a unique indication of the remote ATM service or interface component connected to this one. The value o… |
1.3.6.1.4.1.562.36.2.1.114.110.1.91 | mscAtmIfTxCellMemory | 0 | 0 | mscAtmIftxCellMemory |
1.3.6.1.4.1.562.36.2.1.114.110.1.100 | mscAtmIfFaultHoldOffTime | 0 | 0 | mscAtmIfFaultHoldOfftime |
1.3.6.1.4.1.562.36.2.1.114.110.1.110 | mscAtmIfCtdCalculation | 0 | 0 | This attribute specifies whether cell transfer delay calculation should be performed on loopback cells for each SPVC and SPVP con… |