This attribute specifies whether cell transfer delay calculation
should be performed on loopback cells for each SPVC and SPVP
connection under this interface.
Cell transfer delay is calculated as half of the measured segment
round trip delay of a loopback cell.
Cell transfer delay calculation is only supported when segment
switch side loopback is enabled on the source segment endpoint.
Cell transfer delay calculation is only performed on supported
connections when the accountCollection attribute of the AtmIf Uni
or AtmIf Iisp component has a non-empty reason. Cell transfer delay
calculation is not provided for connections under the Vpt.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies whether cell transfer delay calculation
should be performed on loopback cells for each SPVC and SPVP
connection under this interface.
Cell transfer delay is calculated as half of the measured segment
round trip delay of a loopback cell.
Cell transfer delay calculation is only supported when segment
switch side loopback is enabled on the source segment endpoint.
Cell transfer delay calculation is only performed on supported
connections when the accountCollection attribute of the AtmIf Uni
or AtmIf Iisp component has a non-empty reason. Cell transfer delay
calculation is not provided for connections under the Vpt.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCtdCalculation OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether cell transfer delay calculation should be performed on loopback cells for each SPVC and SPVP connection under this interface. Cell transfer delay is calculated as half of the measured segment round trip delay of a loopback cell. Cell transfer delay calculation is only supported when segment switch side loopback is enabled on the source segment endpoint. Cell transfer delay calculation is only performed on supported connections when the accountCollection attribute of the AtmIf Uni or AtmIf Iisp component has a non-empty reason. Cell transfer delay calculation is not provided for connections under the Vpt." DEFVAL { off } ::= { mscAtmIfProvEntry 110 }
mscAtmIfCtdCalculation OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether cell transfer delay calculation should be performed on loopback cells for each SPVC and SPVP connection under this interface. Cell transfer delay is calculated as half of the measured segment round trip delay of a loopback cell. Cell transfer delay calculation is only supported when segment switch side loopback is enabled on the source segment endpoint. Cell transfer delay calculation is only performed on supported connections when the accountCollection attribute of the AtmIf Uni or AtmIf Iisp component has a non-empty reason. Cell transfer delay calculation is not provided for connections under the Vpt." DEFVAL { off } ::= { mscAtmIfProvEntry 110 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.110.1.10 | mscAtmIfInterfaceName | 0 | 0 | This attribute associates the AtmIf component with a specific interface on a Function Processorfor example, Lp/1 Ds3/0. This impl… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.20 | mscAtmIfType | 0 | 0 | mscAtmIftype |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.30 | mscAtmIfOamSegmentBoundary | 0 | 0 | This attribute specifies whether the interface is on an OAM segment boundary. When yes is selected, the interface is on an OAM s… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.40 | mscAtmIfMaxVpcs | 0 | 0 | This attribute specifies the maximum number of VPCs that can be configured on this AtmIf. The value must not exceed the total num… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.50 | mscAtmIfMaxVccs | 0 | 0 | This attribute specifies the maximum number of usable VCCs that can be configured on this AtmIf. The value must not exceed the nu… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.60 | mscAtmIfTrafficShaping | 0 | 0 | mscAtmIftrafficShaping |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.70 | mscAtmIfUnshapedTransmitQueueing | 0 | 0 | It is migrated in P6.0 to the attributes of the same name under each ATM service category component of the AtmIf CA. This attrib… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.80 | mscAtmIfUsageParameterControl | 0 | 0 | It is migrated in P6.0 to the attributes of the same name under each ATM service category component of the AtmIf CA. This attrib… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.85 | mscAtmIfMaxVpiBits | 0 | 0 | This attribute specifies the maximum number of VPI bits that may be active for this AtmIf. These bits start at the least signifi… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.90 | mscAtmIfRemoteAtmInterfaceLabel | 0 | 0 | This attribute specifies a unique indication of the remote ATM service or interface component connected to this one. The value o… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.91 | mscAtmIfTxCellMemory | 0 | 0 | mscAtmIftxCellMemory |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.100 | mscAtmIfFaultHoldOffTime | 0 | 0 | mscAtmIfFaultHoldOfftime |