It is migrated in P6.0 to the attributes of the same name under each
ATM service category component of the AtmIf CA.
This attribute defines whether usage parameter control (UPC) is
enabled or disabled for receive traffic for Vcc and Vpc connections
for this entire AtmIf. When this attribute is set to enabled, each
provisioned connection under the interface can be individually
provisioned to enforce or ignore UPC. When this attribute is set to
disabled, UPC cannot be enabled on the receive path for any of the
connections.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
It is migrated in P6.0 to the attributes of the same name under each
ATM service category component of the AtmIf CA.
This attribute defines whether usage parameter control (UPC) is
enabled or disabled for receive traffic for Vcc and Vpc connections
for this entire AtmIf. When this attribute is set to enabled, each
provisioned connection under the interface can be individually
provisioned to enforce or ignore UPC. When this attribute is set to
disabled, UPC cannot be enabled on the receive path for any of the
connections.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfUsageParameterControl OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } ACCESS read-write STATUS obsolete DESCRIPTION "It is migrated in P6.0 to the attributes of the same name under each ATM service category component of the AtmIf CA. This attribute defines whether usage parameter control (UPC) is enabled or disabled for receive traffic for Vcc and Vpc connections for this entire AtmIf. When this attribute is set to enabled, each provisioned connection under the interface can be individually provisioned to enforce or ignore UPC. When this attribute is set to disabled, UPC cannot be enabled on the receive path for any of the connections." DEFVAL { disabled } ::= { mscAtmIfProvEntry 80 }
mscAtmIfUsageParameterControl OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } ACCESS read-write STATUS obsolete DESCRIPTION "It is migrated in P6.0 to the attributes of the same name under each ATM service category component of the AtmIf CA. This attribute defines whether usage parameter control (UPC) is enabled or disabled for receive traffic for Vcc and Vpc connections for this entire AtmIf. When this attribute is set to enabled, each provisioned connection under the interface can be individually provisioned to enforce or ignore UPC. When this attribute is set to disabled, UPC cannot be enabled on the receive path for any of the connections." DEFVAL { disabled } ::= { mscAtmIfProvEntry 80 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.114.110.1.10 | mscAtmIfInterfaceName | 0 | 0 | This attribute associates the AtmIf component with a specific interface on a Function Processorfor example, Lp/1 Ds3/0. This impl… |
1.3.6.1.4.1.562.36.2.1.114.110.1.20 | mscAtmIfType | 0 | 0 | mscAtmIftype |
1.3.6.1.4.1.562.36.2.1.114.110.1.30 | mscAtmIfOamSegmentBoundary | 0 | 0 | This attribute specifies whether the interface is on an OAM segment boundary. When yes is selected, the interface is on an OAM s… |
1.3.6.1.4.1.562.36.2.1.114.110.1.40 | mscAtmIfMaxVpcs | 0 | 0 | This attribute specifies the maximum number of VPCs that can be configured on this AtmIf. The value must not exceed the total num… |
1.3.6.1.4.1.562.36.2.1.114.110.1.50 | mscAtmIfMaxVccs | 0 | 0 | This attribute specifies the maximum number of usable VCCs that can be configured on this AtmIf. The value must not exceed the nu… |
1.3.6.1.4.1.562.36.2.1.114.110.1.60 | mscAtmIfTrafficShaping | 0 | 0 | mscAtmIftrafficShaping |
1.3.6.1.4.1.562.36.2.1.114.110.1.70 | mscAtmIfUnshapedTransmitQueueing | 0 | 0 | It is migrated in P6.0 to the attributes of the same name under each ATM service category component of the AtmIf CA. This attrib… |
1.3.6.1.4.1.562.36.2.1.114.110.1.85 | mscAtmIfMaxVpiBits | 0 | 0 | This attribute specifies the maximum number of VPI bits that may be active for this AtmIf. These bits start at the least signifi… |
1.3.6.1.4.1.562.36.2.1.114.110.1.90 | mscAtmIfRemoteAtmInterfaceLabel | 0 | 0 | This attribute specifies a unique indication of the remote ATM service or interface component connected to this one. The value o… |
1.3.6.1.4.1.562.36.2.1.114.110.1.91 | mscAtmIfTxCellMemory | 0 | 0 | mscAtmIftxCellMemory |
1.3.6.1.4.1.562.36.2.1.114.110.1.100 | mscAtmIfFaultHoldOffTime | 0 | 0 | mscAtmIfFaultHoldOfftime |
1.3.6.1.4.1.562.36.2.1.114.110.1.110 | mscAtmIfCtdCalculation | 0 | 0 | This attribute specifies whether cell transfer delay calculation should be performed on loopback cells for each SPVC and SPVP con… |