This attribute specifies the maximum number of VPI bits that may
be active for this AtmIf. These bits start at the least significant bit
position and are contiguous. In general, the maximum VPI which
may be used on the interface is 2**maxVpiBits - 1. The value of the
remaining (inactive) VPI bits is ignored on cells received from the
link.
If the AtmIf is linked to a LogicalProcessor of cardType
3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,
3pDS1Atm, or 2pJ6MAtm, the value of this attribute must be 8. The
maximum VPI supported on these card types is 255.
If the AtmIf is linked to a LogicalProcessor of any other cardType,
the value of this attribute may be 8 or 12. The maximum VPI
supported on these card types is 4095. An exception is that
cardType 8pE1Atm and 8pDS1Atm do not support VPI 4095; the
maximum VPI on these card types is 4094.
If a Uni or an Iisp component is present directly under the AtmIf,
the value of this attribute must be 8.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the maximum number of VPI bits that may
be active for this AtmIf. These bits start at the least significant bit
position and are contiguous. In general, the maximum VPI which
may be used on the interface is 2**maxVpiBits - 1. The value of the
remaining (inactive) VPI bits is ignored on cells received from the
link.
If the AtmIf is linked to a LogicalProcessor of cardType
3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,
3pDS1Atm, or 2pJ6MAtm, the value of this attribute must be 8. The
maximum VPI supported on these card types is 255.
If the AtmIf is linked to a LogicalProcessor of any other cardType,
the value of this attribute may be 8 or 12. The maximum VPI
supported on these card types is 4095. An exception is that
cardType 8pE1Atm and 8pDS1Atm do not support VPI 4095; the
maximum VPI on these card types is 4094.
If a Uni or an Iisp component is present directly under the AtmIf,
the value of this attribute must be 8.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfMaxVpiBits OBJECT-TYPE SYNTAX Unsigned32 (8 | 12) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of VPI bits that may be active for this AtmIf. These bits start at the least significant bit position and are contiguous. In general, the maximum VPI which may be used on the interface is 2**maxVpiBits - 1. The value of the remaining (inactive) VPI bits is ignored on cells received from the link. If the AtmIf is linked to a LogicalProcessor of cardType 3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm, or 2pJ6MAtm, the value of this attribute must be 8. The maximum VPI supported on these card types is 255. If the AtmIf is linked to a LogicalProcessor of any other cardType, the value of this attribute may be 8 or 12. The maximum VPI supported on these card types is 4095. An exception is that cardType 8pE1Atm and 8pDS1Atm do not support VPI 4095; the maximum VPI on these card types is 4094. If a Uni or an Iisp component is present directly under the AtmIf, the value of this attribute must be 8." DEFVAL { 8 } ::= { mscAtmIfProvEntry 85 }
mscAtmIfMaxVpiBits OBJECT-TYPE SYNTAX Unsigned32 (8 | 12) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of VPI bits that may be active for this AtmIf. These bits start at the least significant bit position and are contiguous. In general, the maximum VPI which may be used on the interface is 2**maxVpiBits - 1. The value of the remaining (inactive) VPI bits is ignored on cells received from the link. If the AtmIf is linked to a LogicalProcessor of cardType 3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm, or 2pJ6MAtm, the value of this attribute must be 8. The maximum VPI supported on these card types is 255. If the AtmIf is linked to a LogicalProcessor of any other cardType, the value of this attribute may be 8 or 12. The maximum VPI supported on these card types is 4095. An exception is that cardType 8pE1Atm and 8pDS1Atm do not support VPI 4095; the maximum VPI on these card types is 4094. If a Uni or an Iisp component is present directly under the AtmIf, the value of this attribute must be 8." DEFVAL { 8 } ::= { mscAtmIfProvEntry 85 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.110.1.10 | mscAtmIfInterfaceName | 0 | 0 | This attribute associates the AtmIf component with a specific interface on a Function Processorfor example, Lp/1 Ds3/0. This impl… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.20 | mscAtmIfType | 0 | 0 | mscAtmIftype |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.30 | mscAtmIfOamSegmentBoundary | 0 | 0 | This attribute specifies whether the interface is on an OAM segment boundary. When yes is selected, the interface is on an OAM s… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.40 | mscAtmIfMaxVpcs | 0 | 0 | This attribute specifies the maximum number of VPCs that can be configured on this AtmIf. The value must not exceed the total num… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.50 | mscAtmIfMaxVccs | 0 | 0 | This attribute specifies the maximum number of usable VCCs that can be configured on this AtmIf. The value must not exceed the nu… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.60 | mscAtmIfTrafficShaping | 0 | 0 | mscAtmIftrafficShaping |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.70 | mscAtmIfUnshapedTransmitQueueing | 0 | 0 | It is migrated in P6.0 to the attributes of the same name under each ATM service category component of the AtmIf CA. This attrib… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.80 | mscAtmIfUsageParameterControl | 0 | 0 | It is migrated in P6.0 to the attributes of the same name under each ATM service category component of the AtmIf CA. This attrib… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.90 | mscAtmIfRemoteAtmInterfaceLabel | 0 | 0 | This attribute specifies a unique indication of the remote ATM service or interface component connected to this one. The value o… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.91 | mscAtmIfTxCellMemory | 0 | 0 | mscAtmIftxCellMemory |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.100 | mscAtmIfFaultHoldOffTime | 0 | 0 | mscAtmIfFaultHoldOfftime |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.110 | mscAtmIfCtdCalculation | 0 | 0 | This attribute specifies whether cell transfer delay calculation should be performed on loopback cells for each SPVC and SPVP con… |