This attribute specifies a unique indication of the remote ATM
service or interface component connected to this one. The value of
this attribute can be used by network management applications to
discover the network's ATM topology from its configuration
information.
The syntax of the value, such as component ID, address, or other
numerical identifier, must follow the conventions of the network
management platform. In absence of such convention or platform,
the value should be left empty.
The value is only stored by the module. It is neither validated nor
used to perform any form of remote connectivity validation.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies a unique indication of the remote ATM
service or interface component connected to this one. The value of
this attribute can be used by network management applications to
discover the network's ATM topology from its configuration
information.
The syntax of the value, such as component ID, address, or other
numerical identifier, must follow the conventions of the network
management platform. In absence of such convention or platform,
the value should be left empty.
The value is only stored by the module. It is neither validated nor
used to perform any form of remote connectivity validation.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfRemoteAtmInterfaceLabel OBJECT-TYPE SYNTAX AsciiString (SIZE (0..60)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a unique indication of the remote ATM service or interface component connected to this one. The value of this attribute can be used by network management applications to discover the network's ATM topology from its configuration information. The syntax of the value, such as component ID, address, or other numerical identifier, must follow the conventions of the network management platform. In absence of such convention or platform, the value should be left empty. The value is only stored by the module. It is neither validated nor used to perform any form of remote connectivity validation." DEFVAL { ''H } ::= { mscAtmIfProvEntry 90 }
mscAtmIfRemoteAtmInterfaceLabel OBJECT-TYPE SYNTAX AsciiString (SIZE (0..60)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a unique indication of the remote ATM service or interface component connected to this one. The value of this attribute can be used by network management applications to discover the network's ATM topology from its configuration information. The syntax of the value, such as component ID, address, or other numerical identifier, must follow the conventions of the network management platform. In absence of such convention or platform, the value should be left empty. The value is only stored by the module. It is neither validated nor used to perform any form of remote connectivity validation." DEFVAL { ''H } ::= { mscAtmIfProvEntry 90 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.114.110.1.10 | mscAtmIfInterfaceName | 0 | 0 | This attribute associates the AtmIf component with a specific interface on a Function Processorfor example, Lp/1 Ds3/0. This impl… |
1.3.6.1.4.1.562.36.2.1.114.110.1.20 | mscAtmIfType | 0 | 0 | mscAtmIftype |
1.3.6.1.4.1.562.36.2.1.114.110.1.30 | mscAtmIfOamSegmentBoundary | 0 | 0 | This attribute specifies whether the interface is on an OAM segment boundary. When yes is selected, the interface is on an OAM s… |
1.3.6.1.4.1.562.36.2.1.114.110.1.40 | mscAtmIfMaxVpcs | 0 | 0 | This attribute specifies the maximum number of VPCs that can be configured on this AtmIf. The value must not exceed the total num… |
1.3.6.1.4.1.562.36.2.1.114.110.1.50 | mscAtmIfMaxVccs | 0 | 0 | This attribute specifies the maximum number of usable VCCs that can be configured on this AtmIf. The value must not exceed the nu… |
1.3.6.1.4.1.562.36.2.1.114.110.1.60 | mscAtmIfTrafficShaping | 0 | 0 | mscAtmIftrafficShaping |
1.3.6.1.4.1.562.36.2.1.114.110.1.70 | mscAtmIfUnshapedTransmitQueueing | 0 | 0 | It is migrated in P6.0 to the attributes of the same name under each ATM service category component of the AtmIf CA. This attrib… |
1.3.6.1.4.1.562.36.2.1.114.110.1.80 | mscAtmIfUsageParameterControl | 0 | 0 | It is migrated in P6.0 to the attributes of the same name under each ATM service category component of the AtmIf CA. This attrib… |
1.3.6.1.4.1.562.36.2.1.114.110.1.85 | mscAtmIfMaxVpiBits | 0 | 0 | This attribute specifies the maximum number of VPI bits that may be active for this AtmIf. These bits start at the least signifi… |
1.3.6.1.4.1.562.36.2.1.114.110.1.91 | mscAtmIfTxCellMemory | 0 | 0 | mscAtmIftxCellMemory |
1.3.6.1.4.1.562.36.2.1.114.110.1.100 | mscAtmIfFaultHoldOffTime | 0 | 0 | mscAtmIfFaultHoldOfftime |
1.3.6.1.4.1.562.36.2.1.114.110.1.110 | mscAtmIfCtdCalculation | 0 | 0 | This attribute specifies whether cell transfer delay calculation should be performed on loopback cells for each SPVC and SPVP con… |