mscAtmIftxCellMemory
View at oid-info.com
This attribute specifies the percentage of the Lp/x Eng Arc Aqm/0
txCellMemoryThreshold 0 attribute. This attribute only applies to
ATM IP FPs. It is ignored on all other card types.
For ATM IP FPs, the cell memory which is displayed in Lp/x Eng
Arc Aqm/0 txCellMemoryThreshold 0 is shared across all interfaces
for the card. This attribute allows the allocation of a specific
proportion of the transmit cell memory for the use of connections
under this AtmIf.
If the value of this attribute is specified as 100, connections under
this AtmIf may use up to 100% of the transmit cell memory. If this
attribute is specified as an amount less than 100, then only that
percentage of the transmit cell memory may be used by connections
under this AtmIf. By specifying values for this attribute under the
AtmIf's on a DS3, E3 or MSA32 card, you can limit the transmit
cell memory usage for each AtmIf. This is used to guarantee that all
cell traffic for an AtmIf will respect the cell loss priority (CLP) bit
settings regardless of the atmServiceCategory for the connection.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the percentage of the Lp/x Eng Arc Aqm/0
txCellMemoryThreshold 0 attribute. This attribute only applies to
ATM IP FPs. It is ignored on all other card types.
For ATM IP FPs, the cell memory which is displayed in Lp/x Eng
Arc Aqm/0 txCellMemoryThreshold 0 is shared across all interfaces
for the card. This attribute allows the allocation of a specific
proportion of the transmit cell memory for the use of connections
under this AtmIf.
If the value of this attribute is specified as 100, connections under
this AtmIf may use up to 100% of the transmit cell memory. If this
attribute is specified as an amount less than 100, then only that
percentage of the transmit cell memory may be used by connections
under this AtmIf. By specifying values for this attribute under the
AtmIf's on a DS3, E3 or MSA32 card, you can limit the transmit
cell memory usage for each AtmIf. This is used to guarantee that all
cell traffic for an AtmIf will respect the cell loss priority (CLP) bit
settings regardless of the atmServiceCategory for the connection.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfTxCellMemory OBJECT-TYPE SYNTAX Unsigned32 (1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the percentage of the Lp/x Eng Arc Aqm/0 txCellMemoryThreshold 0 attribute. This attribute only applies to ATM IP FPs. It is ignored on all other card types. For ATM IP FPs, the cell memory which is displayed in Lp/x Eng Arc Aqm/0 txCellMemoryThreshold 0 is shared across all interfaces for the card. This attribute allows the allocation of a specific proportion of the transmit cell memory for the use of connections under this AtmIf. If the value of this attribute is specified as 100, connections under this AtmIf may use up to 100% of the transmit cell memory. If this attribute is specified as an amount less than 100, then only that percentage of the transmit cell memory may be used by connections under this AtmIf. By specifying values for this attribute under the AtmIf's on a DS3, E3 or MSA32 card, you can limit the transmit cell memory usage for each AtmIf. This is used to guarantee that all cell traffic for an AtmIf will respect the cell loss priority (CLP) bit settings regardless of the atmServiceCategory for the connection." DEFVAL { 100 } ::= { mscAtmIfProvEntry 91 }
mscAtmIfTxCellMemory OBJECT-TYPE SYNTAX Unsigned32 (1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the percentage of the Lp/x Eng Arc Aqm/0 txCellMemoryThreshold 0 attribute. This attribute only applies to ATM IP FPs. It is ignored on all other card types. For ATM IP FPs, the cell memory which is displayed in Lp/x Eng Arc Aqm/0 txCellMemoryThreshold 0 is shared across all interfaces for the card. This attribute allows the allocation of a specific proportion of the transmit cell memory for the use of connections under this AtmIf. If the value of this attribute is specified as 100, connections under this AtmIf may use up to 100% of the transmit cell memory. If this attribute is specified as an amount less than 100, then only that percentage of the transmit cell memory may be used by connections under this AtmIf. By specifying values for this attribute under the AtmIf's on a DS3, E3 or MSA32 card, you can limit the transmit cell memory usage for each AtmIf. This is used to guarantee that all cell traffic for an AtmIf will respect the cell loss priority (CLP) bit settings regardless of the atmServiceCategory for the connection." DEFVAL { 100 } ::= { mscAtmIfProvEntry 91 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.110.1.10 | mscAtmIfInterfaceName | 0 | 0 | This attribute associates the AtmIf component with a specific interface on a Function Processorfor example, Lp/1 Ds3/0. This impl… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.20 | mscAtmIfType | 0 | 0 | mscAtmIftype |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.30 | mscAtmIfOamSegmentBoundary | 0 | 0 | This attribute specifies whether the interface is on an OAM segment boundary. When yes is selected, the interface is on an OAM s… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.40 | mscAtmIfMaxVpcs | 0 | 0 | This attribute specifies the maximum number of VPCs that can be configured on this AtmIf. The value must not exceed the total num… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.50 | mscAtmIfMaxVccs | 0 | 0 | This attribute specifies the maximum number of usable VCCs that can be configured on this AtmIf. The value must not exceed the nu… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.60 | mscAtmIfTrafficShaping | 0 | 0 | mscAtmIftrafficShaping |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.70 | mscAtmIfUnshapedTransmitQueueing | 0 | 0 | It is migrated in P6.0 to the attributes of the same name under each ATM service category component of the AtmIf CA. This attrib… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.80 | mscAtmIfUsageParameterControl | 0 | 0 | It is migrated in P6.0 to the attributes of the same name under each ATM service category component of the AtmIf CA. This attrib… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.85 | mscAtmIfMaxVpiBits | 0 | 0 | This attribute specifies the maximum number of VPI bits that may be active for this AtmIf. These bits start at the least signifi… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.90 | mscAtmIfRemoteAtmInterfaceLabel | 0 | 0 | This attribute specifies a unique indication of the remote ATM service or interface component connected to this one. The value o… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.100 | mscAtmIfFaultHoldOffTime | 0 | 0 | mscAtmIfFaultHoldOfftime |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.110 | mscAtmIfCtdCalculation | 0 | 0 | This attribute specifies whether cell transfer delay calculation should be performed on loopback cells for each SPVC and SPVP con… |