This attribute specifies the maximum number of VPCs that can be
configured on this AtmIf. The value must not exceed the total
number of usable VPCs supported by this AtmIf (which is equal to
256 or (256 - (number of VPIs used for VCCs)), according to the
ConnectionMapping component).
Furthermore, if the AtmIf is linked to an LogicalProcessor of
cardType other than 3pE3Atm, 3pDS3Atm, 3pOC3MmAtm,
3pOC3SmAtm, 3pE1Atm, 3pDS1Atm, 2pJ6MAtm, the sum of
(maxVccs + maxVpcs + 1) across all AtmIf linked to that Lp must be
less than or equal to the totalConnectionPoolCapacity attribute of
the Arc component. If the Arc component doesn't exist, the default
value of totalConnectionPoolCapacity is used as the limit.
This attribute has been migrated to the Ca component.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the maximum number of VPCs that can be
configured on this AtmIf. The value must not exceed the total
number of usable VPCs supported by this AtmIf (which is equal to
256 or (256 - (number of VPIs used for VCCs)), according to the
ConnectionMapping component).
Furthermore, if the AtmIf is linked to an LogicalProcessor of
cardType other than 3pE3Atm, 3pDS3Atm, 3pOC3MmAtm,
3pOC3SmAtm, 3pE1Atm, 3pDS1Atm, 2pJ6MAtm, the sum of
(maxVccs + maxVpcs + 1) across all AtmIf linked to that Lp must be
less than or equal to the totalConnectionPoolCapacity attribute of
the Arc component. If the Arc component doesn't exist, the default
value of totalConnectionPoolCapacity is used as the limit.
This attribute has been migrated to the Ca component.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfMaxVpcs OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS obsolete DESCRIPTION "This attribute specifies the maximum number of VPCs that can be configured on this AtmIf. The value must not exceed the total number of usable VPCs supported by this AtmIf (which is equal to 256 or (256 - (number of VPIs used for VCCs)), according to the ConnectionMapping component). Furthermore, if the AtmIf is linked to an LogicalProcessor of cardType other than 3pE3Atm, 3pDS3Atm, 3pOC3MmAtm, 3pOC3SmAtm, 3pE1Atm, 3pDS1Atm, 2pJ6MAtm, the sum of (maxVccs + maxVpcs + 1) across all AtmIf linked to that Lp must be less than or equal to the totalConnectionPoolCapacity attribute of the Arc component. If the Arc component doesn't exist, the default value of totalConnectionPoolCapacity is used as the limit. This attribute has been migrated to the Ca component." DEFVAL { 128 } ::= { mscAtmIfProvEntry 40 }
mscAtmIfMaxVpcs OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS obsolete DESCRIPTION "This attribute specifies the maximum number of VPCs that can be configured on this AtmIf. The value must not exceed the total number of usable VPCs supported by this AtmIf (which is equal to 256 or (256 - (number of VPIs used for VCCs)), according to the ConnectionMapping component). Furthermore, if the AtmIf is linked to an LogicalProcessor of cardType other than 3pE3Atm, 3pDS3Atm, 3pOC3MmAtm, 3pOC3SmAtm, 3pE1Atm, 3pDS1Atm, 2pJ6MAtm, the sum of (maxVccs + maxVpcs + 1) across all AtmIf linked to that Lp must be less than or equal to the totalConnectionPoolCapacity attribute of the Arc component. If the Arc component doesn't exist, the default value of totalConnectionPoolCapacity is used as the limit. This attribute has been migrated to the Ca component." DEFVAL { 128 } ::= { mscAtmIfProvEntry 40 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.110.1.10 | mscAtmIfInterfaceName | 0 | 0 | This attribute associates the AtmIf component with a specific interface on a Function Processorfor example, Lp/1 Ds3/0. This impl… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.20 | mscAtmIfType | 0 | 0 | mscAtmIftype |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.30 | mscAtmIfOamSegmentBoundary | 0 | 0 | This attribute specifies whether the interface is on an OAM segment boundary. When yes is selected, the interface is on an OAM s… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.50 | mscAtmIfMaxVccs | 0 | 0 | This attribute specifies the maximum number of usable VCCs that can be configured on this AtmIf. The value must not exceed the nu… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.60 | mscAtmIfTrafficShaping | 0 | 0 | mscAtmIftrafficShaping |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.70 | mscAtmIfUnshapedTransmitQueueing | 0 | 0 | It is migrated in P6.0 to the attributes of the same name under each ATM service category component of the AtmIf CA. This attrib… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.80 | mscAtmIfUsageParameterControl | 0 | 0 | It is migrated in P6.0 to the attributes of the same name under each ATM service category component of the AtmIf CA. This attrib… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.85 | mscAtmIfMaxVpiBits | 0 | 0 | This attribute specifies the maximum number of VPI bits that may be active for this AtmIf. These bits start at the least signifi… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.90 | mscAtmIfRemoteAtmInterfaceLabel | 0 | 0 | This attribute specifies a unique indication of the remote ATM service or interface component connected to this one. The value o… |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.91 | mscAtmIfTxCellMemory | 0 | 0 | mscAtmIftxCellMemory |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.100 | mscAtmIfFaultHoldOffTime | 0 | 0 | mscAtmIfFaultHoldOfftime |
| 1.3.6.1.4.1.562.36.2.1.114.110.1.110 | mscAtmIfCtdCalculation | 0 | 0 | This attribute specifies whether cell transfer delay calculation should be performed on loopback cells for each SPVC and SPVP con… |