This attribute specifies the portion of the Fixed Round Trip Time
(FRTT) which is added to each ABR call setup which traverses this
interface. The FRTT for the entire call is the sum of the FRTT
portions for each interface traversed by the call. FRTT is used by
the ABR Source or Virtual Source to adjust the value of ICR
according to the rules specified in the ATM Forum TM Version 4.0
specification.
The frttPortion includes propagation delay through the physical
media, plus delays included by the transmission system, plus fixed
components of switch processing delay.
This attribute is used by ATM Networking at call set-up time for
ABR connections directed over this interface.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the portion of the Fixed Round Trip Time
(FRTT) which is added to each ABR call setup which traverses this
interface. The FRTT for the entire call is the sum of the FRTT
portions for each interface traversed by the call. FRTT is used by
the ABR Source or Virtual Source to adjust the value of ICR
according to the rules specified in the ATM Forum TM Version 4.0
specification.
The frttPortion includes propagation delay through the physical
media, plus delays included by the transmission system, plus fixed
components of switch processing delay.
This attribute is used by ATM Networking at call set-up time for
ABR connections directed over this interface.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCAAbrFrttPortion OBJECT-TYPE SYNTAX Unsigned32 (0..10000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the portion of the Fixed Round Trip Time (FRTT) which is added to each ABR call setup which traverses this interface. The FRTT for the entire call is the sum of the FRTT portions for each interface traversed by the call. FRTT is used by the ABR Source or Virtual Source to adjust the value of ICR according to the rules specified in the ATM Forum TM Version 4.0 specification. The frttPortion includes propagation delay through the physical media, plus delays included by the transmission system, plus fixed components of switch processing delay. This attribute is used by ATM Networking at call set-up time for ABR connections directed over this interface." DEFVAL { 5 } ::= { mscAtmIfCAAbrProvEntry 20 }
mscAtmIfCAAbrFrttPortion OBJECT-TYPE SYNTAX Unsigned32 (0..10000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the portion of the Fixed Round Trip Time (FRTT) which is added to each ABR call setup which traverses this interface. The FRTT for the entire call is the sum of the FRTT portions for each interface traversed by the call. FRTT is used by the ABR Source or Virtual Source to adjust the value of ICR according to the rules specified in the ATM Forum TM Version 4.0 specification. The frttPortion includes propagation delay through the physical media, plus delays included by the transmission system, plus fixed components of switch processing delay. This attribute is used by ATM Networking at call set-up time for ABR connections directed over this interface." DEFVAL { 5 } ::= { mscAtmIfCAAbrProvEntry 20 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.10 | mscAtmIfCAAbrPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the available bit rate (ABR) service category except … |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.11 | mscAtmIfCAAbrCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the ABR service category. An ov… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.12 | mscAtmIfCAAbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the ABR service c… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.13 | mscAtmIfCAAbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the ABR service category. The queue lim… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.14 | mscAtmIfCAAbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the AB… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.15 | mscAtmIfCAAbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. This attribute specifies the emission priority (EP) whi… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.19 | mscAtmIfCAAbrFairnessPolicy | 0 | 0 | This attribute specifies the fairness policy which is applied to available bandwidth when performing the ER calculation in the AB… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.21 | mscAtmIfCAAbrAbrConnectionType | 0 | 0 | This attribute specifies the default type for ABR connections. It may be overridden by the abrConnectionType attribute under the… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.22 | mscAtmIfCAAbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the ABR service category. An overri… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.23 | mscAtmIfCAAbrInitialCellRate | 0 | 0 | This attribute specifies the default Initial Cell Rate (ICR) parameter for ABR connections. An override to this default may be s… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.24 | mscAtmIfCAAbrRateDecreaseFactor | 0 | 0 | This attribute specifies the default Rate Decrease Factor (RDF) for ABR connections. An override to this default may be specifie… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.25 | mscAtmIfCAAbrRateIncreaseFactor | 0 | 0 | This attribute specifies the default Rate Increase Factor (RIF) for ABR connections. An override to this default may be specifie… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.26 | mscAtmIfCAAbrMaxCellPerRmCell | 0 | 0 | This attribute specifies the default number of user cells per Resource Management cell (NRM) for ABR connections. An override to … |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.27 | mscAtmIfCAAbrMaxTimeBetweenRmCell | 0 | 0 | This attribute specifies the default time between Resource Management cells (TRM) for ABR connections. An override to this defaul… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.28 | mscAtmIfCAAbrCutoffDecreaseFactor | 0 | 0 | This attribute specifies the default Cutoff Decrease Factor (CDF) parameter for ABR connections. An override to this default may… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.29 | mscAtmIfCAAbrAcrDecreaseTimeFactor | 0 | 0 | This attribute specifies the default Allowed Cell Rate Decrease Time Factor (ADTF) parameter for ABR connections. An override to … |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.30 | mscAtmIfCAAbrDgcraMaximumDelay | 0 | 0 | This attribute specifies the default maximum delay for Dynamic General Cell Rate Algorithm (DGCRA) rate changes for ABR connectio… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.31 | mscAtmIfCAAbrDgcraMinimumDelay | 0 | 0 | This attribute specifies the default minimum delay for Dynamic General Cell Rate Algorithm (DGCRA) rate changes for ABR connectio… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.32 | mscAtmIfCAAbrHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVP and SVC ABR connections. It takes a value from 0 (hig… |