This attribute specifies the default type for ABR connections. It may
be overridden by the abrConnectionType attribute under the Vcd Tm
or Vpd Tm component, or by other configuration options. For
example, for ABR end point connections originating at this switch,
the Vcc Tm abrConnectionType will show sourceDest regardless of
the setting of this attribute.
If this attribute is set to abrSwitch, traversing ABR connections
default to type abrSwitchEr or abrSwitchEfci, depending on the
card type. If the interface to which traffic is directed across the
backplane is configured as type virtualSourceDest and this is a
ATM IP FP, then connection points under this AtmIf are activated as
type virtualSourceDest.
If this attribute is set to virtualSourceDest, traversing ABR
connections may be instantiated as one of the following types:
abrSwitchEr, abrSwitchEfci, or virtualSourceDest. A Virtual
Source-Virtual Destination (VS/VD) boundary forms a break in the
end to end flow of RM cells as defined in the ATM Forum
Specification for Traffic Management Version 4.0. On ATM IP
cards, a VS/VD boundary can be configured for a connection
providing all of the following conditions are met:
1. the ABR connection is traversing (not terminating at) this
interface;
2. both this interface and next hop interface to which traffic is
directed across the backplane are located on ATM IP cards;
3. one or both connecting points are configured as
virtualSourceDest,
4. the next hop interface to which traffic is directed across the
backplane is not configured as nonAbrInterworking.
If this attribute is set to nonAbrInterworking, this interface is
defined as a point of interworking between an ABR and a non-ABR
connection. In this case the next hop interface to which traffic is
directed across the backplane is activated as type sourceDest.
The Vcc Tm or Vpc Tm abrConnectionType operational attribute
indicates what type of ABR connection was activated.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the default type for ABR connections. It may
be overridden by the abrConnectionType attribute under the Vcd Tm
or Vpd Tm component, or by other configuration options. For
example, for ABR end point connections originating at this switch,
the Vcc Tm abrConnectionType will show sourceDest regardless of
the setting of this attribute.
If this attribute is set to abrSwitch, traversing ABR connections
default to type abrSwitchEr or abrSwitchEfci, depending on the
card type. If the interface to which traffic is directed across the
backplane is configured as type virtualSourceDest and this is a
ATM IP FP, then connection points under this AtmIf are activated as
type virtualSourceDest.
If this attribute is set to virtualSourceDest, traversing ABR
connections may be instantiated as one of the following types:
abrSwitchEr, abrSwitchEfci, or virtualSourceDest. A Virtual
Source-Virtual Destination (VS/VD) boundary forms a break in the
end to end flow of RM cells as defined in the ATM Forum
Specification for Traffic Management Version 4.0. On ATM IP
cards, a VS/VD boundary can be configured for a connection
providing all of the following conditions are met:
1. the ABR connection is traversing (not terminating at) this
interface;
2. both this interface and next hop interface to which traffic is
directed across the backplane are located on ATM IP cards;
3. one or both connecting points are configured as
virtualSourceDest,
4. the next hop interface to which traffic is directed across the
backplane is not configured as nonAbrInterworking.
If this attribute is set to nonAbrInterworking, this interface is
defined as a point of interworking between an ABR and a non-ABR
connection. In this case the next hop interface to which traffic is
directed across the backplane is activated as type sourceDest.
The Vcc Tm or Vpc Tm abrConnectionType operational attribute
indicates what type of ABR connection was activated.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCAAbrAbrConnectionType OBJECT-TYPE SYNTAX INTEGER { abrSwitch(0), virtualSourceDest(3), nonAbrInterworking(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default type for ABR connections. It may be overridden by the abrConnectionType attribute under the Vcd Tm or Vpd Tm component, or by other configuration options. For example, for ABR end point connections originating at this switch, the Vcc Tm abrConnectionType will show sourceDest regardless of the setting of this attribute. If this attribute is set to abrSwitch, traversing ABR connections default to type abrSwitchEr or abrSwitchEfci, depending on the card type. If the interface to which traffic is directed across the backplane is configured as type virtualSourceDest and this is a ATM IP FP, then connection points under this AtmIf are activated as type virtualSourceDest. If this attribute is set to virtualSourceDest, traversing ABR connections may be instantiated as one of the following types: abrSwitchEr, abrSwitchEfci, or virtualSourceDest. A Virtual Source-Virtual Destination (VS/VD) boundary forms a break in the end to end flow of RM cells as defined in the ATM Forum Specification for Traffic Management Version 4.0. On ATM IP cards, a VS/VD boundary can be configured for a connection providing all of the following conditions are met: 1. the ABR connection is traversing (not terminating at) this interface; 2. both this interface and next hop interface to which traffic is directed across the backplane are located on ATM IP cards; 3. one or both connecting points are configured as virtualSourceDest, 4. the next hop interface to which traffic is directed across the backplane is not configured as nonAbrInterworking. If this attribute is set to nonAbrInterworking, this interface is defined as a point of interworking between an ABR and a non-ABR connection. In this case the next hop interface to which traffic is directed across the backplane is activated as type sourceDest. The Vcc Tm or Vpc Tm abrConnectionType operational attribute indicates what type of ABR connection was activated." DEFVAL { abrSwitch } ::= { mscAtmIfCAAbrProvEntry 21 }
mscAtmIfCAAbrAbrConnectionType OBJECT-TYPE SYNTAX INTEGER { abrSwitch(0), virtualSourceDest(3), nonAbrInterworking(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default type for ABR connections. It may be overridden by the abrConnectionType attribute under the Vcd Tm or Vpd Tm component, or by other configuration options. For example, for ABR end point connections originating at this switch, the Vcc Tm abrConnectionType will show sourceDest regardless of the setting of this attribute. If this attribute is set to abrSwitch, traversing ABR connections default to type abrSwitchEr or abrSwitchEfci, depending on the card type. If the interface to which traffic is directed across the backplane is configured as type virtualSourceDest and this is a ATM IP FP, then connection points under this AtmIf are activated as type virtualSourceDest. If this attribute is set to virtualSourceDest, traversing ABR connections may be instantiated as one of the following types: abrSwitchEr, abrSwitchEfci, or virtualSourceDest. A Virtual Source-Virtual Destination (VS/VD) boundary forms a break in the end to end flow of RM cells as defined in the ATM Forum Specification for Traffic Management Version 4.0. On ATM IP cards, a VS/VD boundary can be configured for a connection providing all of the following conditions are met: 1. the ABR connection is traversing (not terminating at) this interface; 2. both this interface and next hop interface to which traffic is directed across the backplane are located on ATM IP cards; 3. one or both connecting points are configured as virtualSourceDest, 4. the next hop interface to which traffic is directed across the backplane is not configured as nonAbrInterworking. If this attribute is set to nonAbrInterworking, this interface is defined as a point of interworking between an ABR and a non-ABR connection. In this case the next hop interface to which traffic is directed across the backplane is activated as type sourceDest. The Vcc Tm or Vpc Tm abrConnectionType operational attribute indicates what type of ABR connection was activated." DEFVAL { abrSwitch } ::= { mscAtmIfCAAbrProvEntry 21 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.10 | mscAtmIfCAAbrPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the available bit rate (ABR) service category except … |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.11 | mscAtmIfCAAbrCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the ABR service category. An ov… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.12 | mscAtmIfCAAbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the ABR service c… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.13 | mscAtmIfCAAbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the ABR service category. The queue lim… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.14 | mscAtmIfCAAbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the AB… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.15 | mscAtmIfCAAbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. This attribute specifies the emission priority (EP) whi… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.19 | mscAtmIfCAAbrFairnessPolicy | 0 | 0 | This attribute specifies the fairness policy which is applied to available bandwidth when performing the ER calculation in the AB… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.20 | mscAtmIfCAAbrFrttPortion | 0 | 0 | This attribute specifies the portion of the Fixed Round Trip Time (FRTT) which is added to each ABR call setup which traverses t… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.22 | mscAtmIfCAAbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the ABR service category. An overri… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.23 | mscAtmIfCAAbrInitialCellRate | 0 | 0 | This attribute specifies the default Initial Cell Rate (ICR) parameter for ABR connections. An override to this default may be s… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.24 | mscAtmIfCAAbrRateDecreaseFactor | 0 | 0 | This attribute specifies the default Rate Decrease Factor (RDF) for ABR connections. An override to this default may be specifie… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.25 | mscAtmIfCAAbrRateIncreaseFactor | 0 | 0 | This attribute specifies the default Rate Increase Factor (RIF) for ABR connections. An override to this default may be specifie… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.26 | mscAtmIfCAAbrMaxCellPerRmCell | 0 | 0 | This attribute specifies the default number of user cells per Resource Management cell (NRM) for ABR connections. An override to … |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.27 | mscAtmIfCAAbrMaxTimeBetweenRmCell | 0 | 0 | This attribute specifies the default time between Resource Management cells (TRM) for ABR connections. An override to this defaul… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.28 | mscAtmIfCAAbrCutoffDecreaseFactor | 0 | 0 | This attribute specifies the default Cutoff Decrease Factor (CDF) parameter for ABR connections. An override to this default may… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.29 | mscAtmIfCAAbrAcrDecreaseTimeFactor | 0 | 0 | This attribute specifies the default Allowed Cell Rate Decrease Time Factor (ADTF) parameter for ABR connections. An override to … |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.30 | mscAtmIfCAAbrDgcraMaximumDelay | 0 | 0 | This attribute specifies the default maximum delay for Dynamic General Cell Rate Algorithm (DGCRA) rate changes for ABR connectio… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.31 | mscAtmIfCAAbrDgcraMinimumDelay | 0 | 0 | This attribute specifies the default minimum delay for Dynamic General Cell Rate Algorithm (DGCRA) rate changes for ABR connectio… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.32 | mscAtmIfCAAbrHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVP and SVC ABR connections. It takes a value from 0 (hig… |