This attribute specifies the default Initial Cell Rate (ICR) parameter
for ABR connections. An override to this default may be specified
for a provisioned connection under the Vcd Tm Abr or Vpd Tm Abr
component, or signalled in the ABR Setup Parameters Information
Element.
ICR is the rate at which a source should send initially and after an
idle period.
When this attribute is set to useMcr, ICR is set to the same value as
the Minimum Cell Rate (MCR) for the connection.
When this attribute is set to usePcr, ICR is set to the same value as
the Peak Cell Rate (PCR) for the connection.
When this attribute is set to some explicit number, that number is
used as the ICR, provided it is between MCR and PCR. If the
explicit number is below MCR, then MCR is used as ICR. If the
explicit number is above PCR, then PCR is used as ICR.
VALUES (
16777217 = useMcr
16777218 = usePcr
)
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the default Initial Cell Rate (ICR) parameter
for ABR connections. An override to this default may be specified
for a provisioned connection under the Vcd Tm Abr or Vpd Tm Abr
component, or signalled in the ABR Setup Parameters Information
Element.
ICR is the rate at which a source should send initially and after an
idle period.
When this attribute is set to useMcr, ICR is set to the same value as
the Minimum Cell Rate (MCR) for the connection.
When this attribute is set to usePcr, ICR is set to the same value as
the Peak Cell Rate (PCR) for the connection.
When this attribute is set to some explicit number, that number is
used as the ICR, provided it is between MCR and PCR. If the
explicit number is below MCR, then MCR is used as ICR. If the
explicit number is above PCR, then PCR is used as ICR.
VALUES (
16777217 = useMcr
16777218 = usePcr
)
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCAAbrInitialCellRate OBJECT-TYPE SYNTAX Unsigned32 (0..16777215 | 16777217 | 16777218) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default Initial Cell Rate (ICR) parameter for ABR connections. An override to this default may be specified for a provisioned connection under the Vcd Tm Abr or Vpd Tm Abr component, or signalled in the ABR Setup Parameters Information Element. ICR is the rate at which a source should send initially and after an idle period. When this attribute is set to useMcr, ICR is set to the same value as the Minimum Cell Rate (MCR) for the connection. When this attribute is set to usePcr, ICR is set to the same value as the Peak Cell Rate (PCR) for the connection. When this attribute is set to some explicit number, that number is used as the ICR, provided it is between MCR and PCR. If the explicit number is below MCR, then MCR is used as ICR. If the explicit number is above PCR, then PCR is used as ICR. VALUES ( 16777217 = useMcr 16777218 = usePcr )" DEFVAL { 16777218 } ::= { mscAtmIfCAAbrProvEntry 23 }
mscAtmIfCAAbrInitialCellRate OBJECT-TYPE SYNTAX Unsigned32 (0..16777215 | 16777217 | 16777218) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default Initial Cell Rate (ICR) parameter for ABR connections. An override to this default may be specified for a provisioned connection under the Vcd Tm Abr or Vpd Tm Abr component, or signalled in the ABR Setup Parameters Information Element. ICR is the rate at which a source should send initially and after an idle period. When this attribute is set to useMcr, ICR is set to the same value as the Minimum Cell Rate (MCR) for the connection. When this attribute is set to usePcr, ICR is set to the same value as the Peak Cell Rate (PCR) for the connection. When this attribute is set to some explicit number, that number is used as the ICR, provided it is between MCR and PCR. If the explicit number is below MCR, then MCR is used as ICR. If the explicit number is above PCR, then PCR is used as ICR. VALUES ( 16777217 = useMcr 16777218 = usePcr )" DEFVAL { 16777218 } ::= { mscAtmIfCAAbrProvEntry 23 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.10 | mscAtmIfCAAbrPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the available bit rate (ABR) service category except … |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.11 | mscAtmIfCAAbrCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the ABR service category. An ov… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.12 | mscAtmIfCAAbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the ABR service c… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.13 | mscAtmIfCAAbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the ABR service category. The queue lim… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.14 | mscAtmIfCAAbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the AB… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.15 | mscAtmIfCAAbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. This attribute specifies the emission priority (EP) whi… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.19 | mscAtmIfCAAbrFairnessPolicy | 0 | 0 | This attribute specifies the fairness policy which is applied to available bandwidth when performing the ER calculation in the AB… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.20 | mscAtmIfCAAbrFrttPortion | 0 | 0 | This attribute specifies the portion of the Fixed Round Trip Time (FRTT) which is added to each ABR call setup which traverses t… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.21 | mscAtmIfCAAbrAbrConnectionType | 0 | 0 | This attribute specifies the default type for ABR connections. It may be overridden by the abrConnectionType attribute under the… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.22 | mscAtmIfCAAbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the ABR service category. An overri… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.24 | mscAtmIfCAAbrRateDecreaseFactor | 0 | 0 | This attribute specifies the default Rate Decrease Factor (RDF) for ABR connections. An override to this default may be specifie… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.25 | mscAtmIfCAAbrRateIncreaseFactor | 0 | 0 | This attribute specifies the default Rate Increase Factor (RIF) for ABR connections. An override to this default may be specifie… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.26 | mscAtmIfCAAbrMaxCellPerRmCell | 0 | 0 | This attribute specifies the default number of user cells per Resource Management cell (NRM) for ABR connections. An override to … |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.27 | mscAtmIfCAAbrMaxTimeBetweenRmCell | 0 | 0 | This attribute specifies the default time between Resource Management cells (TRM) for ABR connections. An override to this defaul… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.28 | mscAtmIfCAAbrCutoffDecreaseFactor | 0 | 0 | This attribute specifies the default Cutoff Decrease Factor (CDF) parameter for ABR connections. An override to this default may… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.29 | mscAtmIfCAAbrAcrDecreaseTimeFactor | 0 | 0 | This attribute specifies the default Allowed Cell Rate Decrease Time Factor (ADTF) parameter for ABR connections. An override to … |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.30 | mscAtmIfCAAbrDgcraMaximumDelay | 0 | 0 | This attribute specifies the default maximum delay for Dynamic General Cell Rate Algorithm (DGCRA) rate changes for ABR connectio… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.31 | mscAtmIfCAAbrDgcraMinimumDelay | 0 | 0 | This attribute specifies the default minimum delay for Dynamic General Cell Rate Algorithm (DGCRA) rate changes for ABR connectio… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.32 | mscAtmIfCAAbrHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVP and SVC ABR connections. It takes a value from 0 (hig… |