This attribute specifies the default Cutoff Decrease Factor (CDF)
parameter for ABR connections. An override to this default may be
specified for a provisioned connection under the Vcd Tm Abr or Vpd
Tm Abr component, or signalled in the ABR Additional Parameters
Information Element.
When the value of this attribute is non-zero, CDF is computed as
the inverse of the value. For example, if the value is 32, the value of
CDF is 1/32. When the value of this attribute is 0, CDF is also zero.
CDF controls the decrease in the Allowed Cell Rate (ACR)
associated with the CRM parameter. CRM is the limit of the
number of forward Resource Management (F-RM) cells which may
be sent in the absence of received backward RM cells. When this
limit is crossed, the ACR value would be decreased by the amount
(CDF*ACR). The ACR is not allowed to fall below the MCR, in
which case the ACR is set to MCR.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the default Cutoff Decrease Factor (CDF)
parameter for ABR connections. An override to this default may be
specified for a provisioned connection under the Vcd Tm Abr or Vpd
Tm Abr component, or signalled in the ABR Additional Parameters
Information Element.
When the value of this attribute is non-zero, CDF is computed as
the inverse of the value. For example, if the value is 32, the value of
CDF is 1/32. When the value of this attribute is 0, CDF is also zero.
CDF controls the decrease in the Allowed Cell Rate (ACR)
associated with the CRM parameter. CRM is the limit of the
number of forward Resource Management (F-RM) cells which may
be sent in the absence of received backward RM cells. When this
limit is crossed, the ACR value would be decreased by the amount
(CDF*ACR). The ACR is not allowed to fall below the MCR, in
which case the ACR is set to MCR.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCAAbrCutoffDecreaseFactor OBJECT-TYPE SYNTAX Unsigned32 (0 | 1 | 2 | 4 | 8 | 16 | 32 | 64) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default Cutoff Decrease Factor (CDF) parameter for ABR connections. An override to this default may be specified for a provisioned connection under the Vcd Tm Abr or Vpd Tm Abr component, or signalled in the ABR Additional Parameters Information Element. When the value of this attribute is non-zero, CDF is computed as the inverse of the value. For example, if the value is 32, the value of CDF is 1/32. When the value of this attribute is 0, CDF is also zero. CDF controls the decrease in the Allowed Cell Rate (ACR) associated with the CRM parameter. CRM is the limit of the number of forward Resource Management (F-RM) cells which may be sent in the absence of received backward RM cells. When this limit is crossed, the ACR value would be decreased by the amount (CDF*ACR). The ACR is not allowed to fall below the MCR, in which case the ACR is set to MCR." DEFVAL { 16 } ::= { mscAtmIfCAAbrProvEntry 28 }
mscAtmIfCAAbrCutoffDecreaseFactor OBJECT-TYPE SYNTAX Unsigned32 (0 | 1 | 2 | 4 | 8 | 16 | 32 | 64) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default Cutoff Decrease Factor (CDF) parameter for ABR connections. An override to this default may be specified for a provisioned connection under the Vcd Tm Abr or Vpd Tm Abr component, or signalled in the ABR Additional Parameters Information Element. When the value of this attribute is non-zero, CDF is computed as the inverse of the value. For example, if the value is 32, the value of CDF is 1/32. When the value of this attribute is 0, CDF is also zero. CDF controls the decrease in the Allowed Cell Rate (ACR) associated with the CRM parameter. CRM is the limit of the number of forward Resource Management (F-RM) cells which may be sent in the absence of received backward RM cells. When this limit is crossed, the ACR value would be decreased by the amount (CDF*ACR). The ACR is not allowed to fall below the MCR, in which case the ACR is set to MCR." DEFVAL { 16 } ::= { mscAtmIfCAAbrProvEntry 28 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.10 | mscAtmIfCAAbrPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the available bit rate (ABR) service category except … |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.11 | mscAtmIfCAAbrCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the ABR service category. An ov… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.12 | mscAtmIfCAAbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the ABR service c… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.13 | mscAtmIfCAAbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the ABR service category. The queue lim… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.14 | mscAtmIfCAAbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the AB… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.15 | mscAtmIfCAAbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. This attribute specifies the emission priority (EP) whi… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.19 | mscAtmIfCAAbrFairnessPolicy | 0 | 0 | This attribute specifies the fairness policy which is applied to available bandwidth when performing the ER calculation in the AB… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.20 | mscAtmIfCAAbrFrttPortion | 0 | 0 | This attribute specifies the portion of the Fixed Round Trip Time (FRTT) which is added to each ABR call setup which traverses t… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.21 | mscAtmIfCAAbrAbrConnectionType | 0 | 0 | This attribute specifies the default type for ABR connections. It may be overridden by the abrConnectionType attribute under the… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.22 | mscAtmIfCAAbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the ABR service category. An overri… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.23 | mscAtmIfCAAbrInitialCellRate | 0 | 0 | This attribute specifies the default Initial Cell Rate (ICR) parameter for ABR connections. An override to this default may be s… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.24 | mscAtmIfCAAbrRateDecreaseFactor | 0 | 0 | This attribute specifies the default Rate Decrease Factor (RDF) for ABR connections. An override to this default may be specifie… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.25 | mscAtmIfCAAbrRateIncreaseFactor | 0 | 0 | This attribute specifies the default Rate Increase Factor (RIF) for ABR connections. An override to this default may be specifie… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.26 | mscAtmIfCAAbrMaxCellPerRmCell | 0 | 0 | This attribute specifies the default number of user cells per Resource Management cell (NRM) for ABR connections. An override to … |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.27 | mscAtmIfCAAbrMaxTimeBetweenRmCell | 0 | 0 | This attribute specifies the default time between Resource Management cells (TRM) for ABR connections. An override to this defaul… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.29 | mscAtmIfCAAbrAcrDecreaseTimeFactor | 0 | 0 | This attribute specifies the default Allowed Cell Rate Decrease Time Factor (ADTF) parameter for ABR connections. An override to … |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.30 | mscAtmIfCAAbrDgcraMaximumDelay | 0 | 0 | This attribute specifies the default maximum delay for Dynamic General Cell Rate Algorithm (DGCRA) rate changes for ABR connectio… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.31 | mscAtmIfCAAbrDgcraMinimumDelay | 0 | 0 | This attribute specifies the default minimum delay for Dynamic General Cell Rate Algorithm (DGCRA) rate changes for ABR connectio… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.32 | mscAtmIfCAAbrHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVP and SVC ABR connections. It takes a value from 0 (hig… |