This attribute specifies the default time between Resource
Management cells (TRM) for ABR connections. An override to this
default may be specified for a provisioned connection under the Vcd
Tm Abr or Vpd Tm Abr component, or signalled in the ABR
Additional Parameters Information Element.
TRM provides an upper bound on the time interval between forward
Resource Management (F-RM) cells for an ABR source. Since the
last F-RM cell was sent, if at least TRM time has elapsed and at
least 2 other cells have been sent, the next cell to be transmitted
would be a forward RM cell.
This attribute is ignored under all conditions where the Vcc Tm or
Vcd Tm operational attribute abrConnectionType is displayed as
explicitRateMarking.
The provisioned value of 781 is signalled in the ABR Additional
Parameters Information Element as 0.
1563 is signalled as 1.
3125 is signalled as 2.
6250 is signalled as 3.
12500 is signalled as 4.
25000 is signalled as 5.
50000 is signalled as 6.
100000 is signalled as 7.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the default time between Resource
Management cells (TRM) for ABR connections. An override to this
default may be specified for a provisioned connection under the Vcd
Tm Abr or Vpd Tm Abr component, or signalled in the ABR
Additional Parameters Information Element.
TRM provides an upper bound on the time interval between forward
Resource Management (F-RM) cells for an ABR source. Since the
last F-RM cell was sent, if at least TRM time has elapsed and at
least 2 other cells have been sent, the next cell to be transmitted
would be a forward RM cell.
This attribute is ignored under all conditions where the Vcc Tm or
Vcd Tm operational attribute abrConnectionType is displayed as
explicitRateMarking.
The provisioned value of 781 is signalled in the ABR Additional
Parameters Information Element as 0.
1563 is signalled as 1.
3125 is signalled as 2.
6250 is signalled as 3.
12500 is signalled as 4.
25000 is signalled as 5.
50000 is signalled as 6.
100000 is signalled as 7.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCAAbrMaxTimeBetweenRmCell OBJECT-TYPE SYNTAX Unsigned32 (781 | 1563 | 3125 | 6250 | 12500 | 25000 | 50000 | 100000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default time between Resource Management cells (TRM) for ABR connections. An override to this default may be specified for a provisioned connection under the Vcd Tm Abr or Vpd Tm Abr component, or signalled in the ABR Additional Parameters Information Element. TRM provides an upper bound on the time interval between forward Resource Management (F-RM) cells for an ABR source. Since the last F-RM cell was sent, if at least TRM time has elapsed and at least 2 other cells have been sent, the next cell to be transmitted would be a forward RM cell. This attribute is ignored under all conditions where the Vcc Tm or Vcd Tm operational attribute abrConnectionType is displayed as explicitRateMarking. The provisioned value of 781 is signalled in the ABR Additional Parameters Information Element as 0. 1563 is signalled as 1. 3125 is signalled as 2. 6250 is signalled as 3. 12500 is signalled as 4. 25000 is signalled as 5. 50000 is signalled as 6. 100000 is signalled as 7." DEFVAL { 100000 } ::= { mscAtmIfCAAbrProvEntry 27 }
mscAtmIfCAAbrMaxTimeBetweenRmCell OBJECT-TYPE SYNTAX Unsigned32 (781 | 1563 | 3125 | 6250 | 12500 | 25000 | 50000 | 100000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default time between Resource Management cells (TRM) for ABR connections. An override to this default may be specified for a provisioned connection under the Vcd Tm Abr or Vpd Tm Abr component, or signalled in the ABR Additional Parameters Information Element. TRM provides an upper bound on the time interval between forward Resource Management (F-RM) cells for an ABR source. Since the last F-RM cell was sent, if at least TRM time has elapsed and at least 2 other cells have been sent, the next cell to be transmitted would be a forward RM cell. This attribute is ignored under all conditions where the Vcc Tm or Vcd Tm operational attribute abrConnectionType is displayed as explicitRateMarking. The provisioned value of 781 is signalled in the ABR Additional Parameters Information Element as 0. 1563 is signalled as 1. 3125 is signalled as 2. 6250 is signalled as 3. 12500 is signalled as 4. 25000 is signalled as 5. 50000 is signalled as 6. 100000 is signalled as 7." DEFVAL { 100000 } ::= { mscAtmIfCAAbrProvEntry 27 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.10 | mscAtmIfCAAbrPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the available bit rate (ABR) service category except … |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.11 | mscAtmIfCAAbrCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the ABR service category. An ov… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.12 | mscAtmIfCAAbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the ABR service c… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.13 | mscAtmIfCAAbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the ABR service category. The queue lim… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.14 | mscAtmIfCAAbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the AB… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.15 | mscAtmIfCAAbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. This attribute specifies the emission priority (EP) whi… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.19 | mscAtmIfCAAbrFairnessPolicy | 0 | 0 | This attribute specifies the fairness policy which is applied to available bandwidth when performing the ER calculation in the AB… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.20 | mscAtmIfCAAbrFrttPortion | 0 | 0 | This attribute specifies the portion of the Fixed Round Trip Time (FRTT) which is added to each ABR call setup which traverses t… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.21 | mscAtmIfCAAbrAbrConnectionType | 0 | 0 | This attribute specifies the default type for ABR connections. It may be overridden by the abrConnectionType attribute under the… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.22 | mscAtmIfCAAbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the ABR service category. An overri… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.23 | mscAtmIfCAAbrInitialCellRate | 0 | 0 | This attribute specifies the default Initial Cell Rate (ICR) parameter for ABR connections. An override to this default may be s… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.24 | mscAtmIfCAAbrRateDecreaseFactor | 0 | 0 | This attribute specifies the default Rate Decrease Factor (RDF) for ABR connections. An override to this default may be specifie… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.25 | mscAtmIfCAAbrRateIncreaseFactor | 0 | 0 | This attribute specifies the default Rate Increase Factor (RIF) for ABR connections. An override to this default may be specifie… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.26 | mscAtmIfCAAbrMaxCellPerRmCell | 0 | 0 | This attribute specifies the default number of user cells per Resource Management cell (NRM) for ABR connections. An override to … |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.28 | mscAtmIfCAAbrCutoffDecreaseFactor | 0 | 0 | This attribute specifies the default Cutoff Decrease Factor (CDF) parameter for ABR connections. An override to this default may… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.29 | mscAtmIfCAAbrAcrDecreaseTimeFactor | 0 | 0 | This attribute specifies the default Allowed Cell Rate Decrease Time Factor (ADTF) parameter for ABR connections. An override to … |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.30 | mscAtmIfCAAbrDgcraMaximumDelay | 0 | 0 | This attribute specifies the default maximum delay for Dynamic General Cell Rate Algorithm (DGCRA) rate changes for ABR connectio… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.31 | mscAtmIfCAAbrDgcraMinimumDelay | 0 | 0 | This attribute specifies the default minimum delay for Dynamic General Cell Rate Algorithm (DGCRA) rate changes for ABR connectio… |
| 1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.32 | mscAtmIfCAAbrHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVP and SVC ABR connections. It takes a value from 0 (hig… |