This attribute specifies the default usage parameter control (UPC)
option for connections of the ABR service category. An override to
this default may be specified for a provisioned connection under the
Vcd Tm or Vpd Tm component.
For ATM IP cards, if this attribute is set to enforced, UPC for ABR
connection is enforced as a Dynamic Generic Cell Rate Algorithm
(DGCRA) based on the connection traffic descriptor.
For CQC-based ATM cards, if this attribute is set to enforced, the
connection enforces a single GCRA policer at the defined PCR and
CDVT for this connection.
When UPC is enforced on an ABR connection, non-conforming
cells are discarded.
On ATM IP FPs, when this attribute is set to monitored, UPC
conformance checking is performed, except, instead of the non-
conforming cells being discarded, they are merely counted in the
UPC violations counts, and passed on unchanged.
On CQC-based ATM FPs, when this attribute is set to monitored, it
has the same effect as setting it to disabled.
When this attribute is set to disabled, UPC is disabled on the receive
path for all ABR connections.
This attribute does not apply to basic Vpts, and standard Vpt Vccs.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the default usage parameter control (UPC)
option for connections of the ABR service category. An override to
this default may be specified for a provisioned connection under the
Vcd Tm or Vpd Tm component.
For ATM IP cards, if this attribute is set to enforced, UPC for ABR
connection is enforced as a Dynamic Generic Cell Rate Algorithm
(DGCRA) based on the connection traffic descriptor.
For CQC-based ATM cards, if this attribute is set to enforced, the
connection enforces a single GCRA policer at the defined PCR and
CDVT for this connection.
When UPC is enforced on an ABR connection, non-conforming
cells are discarded.
On ATM IP FPs, when this attribute is set to monitored, UPC
conformance checking is performed, except, instead of the non-
conforming cells being discarded, they are merely counted in the
UPC violations counts, and passed on unchanged.
On CQC-based ATM FPs, when this attribute is set to monitored, it
has the same effect as setting it to disabled.
When this attribute is set to disabled, UPC is disabled on the receive
path for all ABR connections.
This attribute does not apply to basic Vpts, and standard Vpt Vccs.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCAAbrUsageParameterControl OBJECT-TYPE SYNTAX INTEGER { enforced(0), disabled(1), monitored(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default usage parameter control (UPC) option for connections of the ABR service category. An override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. For ATM IP cards, if this attribute is set to enforced, UPC for ABR connection is enforced as a Dynamic Generic Cell Rate Algorithm (DGCRA) based on the connection traffic descriptor. For CQC-based ATM cards, if this attribute is set to enforced, the connection enforces a single GCRA policer at the defined PCR and CDVT for this connection. When UPC is enforced on an ABR connection, non-conforming cells are discarded. On ATM IP FPs, when this attribute is set to monitored, UPC conformance checking is performed, except, instead of the non- conforming cells being discarded, they are merely counted in the UPC violations counts, and passed on unchanged. On CQC-based ATM FPs, when this attribute is set to monitored, it has the same effect as setting it to disabled. When this attribute is set to disabled, UPC is disabled on the receive path for all ABR connections. This attribute does not apply to basic Vpts, and standard Vpt Vccs." DEFVAL { disabled } ::= { mscAtmIfCAAbrProvEntry 22 }
mscAtmIfCAAbrUsageParameterControl OBJECT-TYPE SYNTAX INTEGER { enforced(0), disabled(1), monitored(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default usage parameter control (UPC) option for connections of the ABR service category. An override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. For ATM IP cards, if this attribute is set to enforced, UPC for ABR connection is enforced as a Dynamic Generic Cell Rate Algorithm (DGCRA) based on the connection traffic descriptor. For CQC-based ATM cards, if this attribute is set to enforced, the connection enforces a single GCRA policer at the defined PCR and CDVT for this connection. When UPC is enforced on an ABR connection, non-conforming cells are discarded. On ATM IP FPs, when this attribute is set to monitored, UPC conformance checking is performed, except, instead of the non- conforming cells being discarded, they are merely counted in the UPC violations counts, and passed on unchanged. On CQC-based ATM FPs, when this attribute is set to monitored, it has the same effect as setting it to disabled. When this attribute is set to disabled, UPC is disabled on the receive path for all ABR connections. This attribute does not apply to basic Vpts, and standard Vpt Vccs." DEFVAL { disabled } ::= { mscAtmIfCAAbrProvEntry 22 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.10 | mscAtmIfCAAbrPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the available bit rate (ABR) service category except … |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.11 | mscAtmIfCAAbrCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the ABR service category. An ov… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.12 | mscAtmIfCAAbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the ABR service c… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.13 | mscAtmIfCAAbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the ABR service category. The queue lim… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.14 | mscAtmIfCAAbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the AB… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.15 | mscAtmIfCAAbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. This attribute specifies the emission priority (EP) whi… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.19 | mscAtmIfCAAbrFairnessPolicy | 0 | 0 | This attribute specifies the fairness policy which is applied to available bandwidth when performing the ER calculation in the AB… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.20 | mscAtmIfCAAbrFrttPortion | 0 | 0 | This attribute specifies the portion of the Fixed Round Trip Time (FRTT) which is added to each ABR call setup which traverses t… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.21 | mscAtmIfCAAbrAbrConnectionType | 0 | 0 | This attribute specifies the default type for ABR connections. It may be overridden by the abrConnectionType attribute under the… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.23 | mscAtmIfCAAbrInitialCellRate | 0 | 0 | This attribute specifies the default Initial Cell Rate (ICR) parameter for ABR connections. An override to this default may be s… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.24 | mscAtmIfCAAbrRateDecreaseFactor | 0 | 0 | This attribute specifies the default Rate Decrease Factor (RDF) for ABR connections. An override to this default may be specifie… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.25 | mscAtmIfCAAbrRateIncreaseFactor | 0 | 0 | This attribute specifies the default Rate Increase Factor (RIF) for ABR connections. An override to this default may be specifie… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.26 | mscAtmIfCAAbrMaxCellPerRmCell | 0 | 0 | This attribute specifies the default number of user cells per Resource Management cell (NRM) for ABR connections. An override to … |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.27 | mscAtmIfCAAbrMaxTimeBetweenRmCell | 0 | 0 | This attribute specifies the default time between Resource Management cells (TRM) for ABR connections. An override to this defaul… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.28 | mscAtmIfCAAbrCutoffDecreaseFactor | 0 | 0 | This attribute specifies the default Cutoff Decrease Factor (CDF) parameter for ABR connections. An override to this default may… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.29 | mscAtmIfCAAbrAcrDecreaseTimeFactor | 0 | 0 | This attribute specifies the default Allowed Cell Rate Decrease Time Factor (ADTF) parameter for ABR connections. An override to … |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.30 | mscAtmIfCAAbrDgcraMaximumDelay | 0 | 0 | This attribute specifies the default maximum delay for Dynamic General Cell Rate Algorithm (DGCRA) rate changes for ABR connectio… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.31 | mscAtmIfCAAbrDgcraMinimumDelay | 0 | 0 | This attribute specifies the default minimum delay for Dynamic General Cell Rate Algorithm (DGCRA) rate changes for ABR connectio… |
1.3.6.1.4.1.562.36.2.1.114.3.5.100.1.32 | mscAtmIfCAAbrHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVP and SVC ABR connections. It takes a value from 0 (hig… |