OID reference

unitRedRevert

1.3.6.1.4.1.1206.4.2.1.3.4

Description

<Definition> The red revert in tenth seconds ( 0.0 - 25.5 sec). This value shall provide the minimum red revert time for all phases (i.e. if it is greater than a phaseRedRevert object value, then this value shall be used as the red revert time for the affected phase). This object provides a minimum Red indication foll…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.1206.4.2.1.3 (unit)
Node code
4
Node name
unitRedRevert
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.1206.4.2.1.3.4
URN notation
urn:oid:1.3.6.1.4.1.1206.4.2.1.3.4
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 1206 4 2 1 3 4}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) unitRedRevert(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) unitRedRevert(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) unitRedRevert(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) unitRedRevert(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) unitRedRevert(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) unitRedRevert(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) unitRedRevert(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) unitRedRevert(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) unitRedRevert(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) unitRedRevert(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) unitRedRevert(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) unitRedRevert(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) unitRedRevert(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) unitRedRevert(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) unitRedRevert(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) unitRedRevert(4)}
OID-IRI notation
  • /1/3/6/1/4/1/1206/4/2/1/3/4
  • /ISO/Identified-Organization/6/1/4/1/1206/4/2/1/3/4
  • /ISO/3/6/1/4/1/1206/4/2/1/3/4
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/1206/transportation/devices/asc/unit/unitRedRevert
  • /iso/identified-organization/dod/internet/private/enterprise/nema/transportation/devices/asc/unit/unitRedRevert
  • /iso/identified-organization/dod/internet/private/enterprises/1206/transportation/devices/asc/unit/unitRedRevert
  • /iso/identified-organization/dod/internet/private/enterprises/nema/transportation/devices/asc/unit/unitRedRevert
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/1206/transportation/devices/asc/unit/unitRedRevert
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/nema/transportation/devices/asc/unit/unitRedRevert
  • /iso/identified-organization/dod/internet/private/vendor-objects/1206/transportation/devices/asc/unit/unitRedRevert
  • /iso/identified-organization/dod/internet/private/vendor-objects/nema/transportation/devices/asc/unit/unitRedRevert
  • /iso/org/dod/internet/private/enterprise/1206/transportation/devices/asc/unit/unitRedRevert
  • /iso/org/dod/internet/private/enterprise/nema/transportation/devices/asc/unit/unitRedRevert
  • /iso/org/dod/internet/private/enterprises/1206/transportation/devices/asc/unit/unitRedRevert
  • /iso/org/dod/internet/private/enterprises/nema/transportation/devices/asc/unit/unitRedRevert
  • /iso/org/dod/internet/private/ldap-enterprise/1206/transportation/devices/asc/unit/unitRedRevert
  • /iso/org/dod/internet/private/ldap-enterprise/nema/transportation/devices/asc/unit/unitRedRevert
  • /iso/org/dod/internet/private/vendor-objects/1206/transportation/devices/asc/unit/unitRedRevert
  • /iso/org/dod/internet/private/vendor-objects/nema/transportation/devices/asc/unit/unitRedRevert
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
mandatory, optional

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — NTCIP published standard MIB annexes (reviewed modules)

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
mandatory
Allowed ranges
0–255

Variant 2 — NTCIP published standard MIB annexes (reviewed modules)

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
optional
Allowed ranges
0–255

Using this OID with SNMP

At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.

snmpget [connection options] DEVICE .1.3.6.1.4.1.1206.4.2.1.3.4.0

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 4 distinct definitions; some records may not include a definition.

Show 4 published definitions

unitRedRevert · mandatory

unitRedRevert OBJECT-TYPE
      SYNTAX INTEGER (0..255)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION "<Definition> The red revert in tenth seconds ( 0.0 - 25.5
            sec). This value shall provide the minimum red revert time for
            all phases (i.e. if it is greater than a phaseRedRevert object
            value, then this value shall be used as the red revert time for
            the affected phase). This object provides a minimum Red
            indication following the Yellow Change interval and prior to the
            next display of Green on the same signal output driver group.
      <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.4
      <Unit> tenth second"
::= { unit 4 }

unitRedRevert · mandatory

unitRedRevert OBJECT-TYPE
          SYNTAX INTEGER (0..255)
          ACCESS read-write
          STATUS mandatory
          DESCRIPTION
               "The red revert in tenth seconds ( 0.0 - 25.5 seconds). This value shall provide the minimum
               red revert time for all phases (i.e. if it is greater than a phaseRedRevert object value, then
               this value shall be used as the red revert time for the affected phase).
               This object provides a minimum Red indication following the Yellow Change interval and
               prior to the next display of Green on the same signal output driver group."
::= { unit 4 }

unitRedRevert · optional

unitRedRevert   OBJECT-TYPE
   SYNTAX   INTEGER (0..255)
   ACCESS   read-write
   STATUS   optional
   DESCRIPTION
      "<Definition> The red revert in tenth seconds ( 0.0 -
       25.5 sec). This value shall provide the minimum
       red revert time for all phases (i.e. if it is
       greater than a phaseRedRevert object value, then
       this value shall be used as the red revert time for
       the affected phase). This object provides a minimum
       Red indication following the Yellow Change interval
       and prior to the next display of Green on the same
       signal output driver group.
       <DescriptiveName> NTCIP-1202::ASC.unitRedRevert
       <DataConceptType> Data Element
       <Unit> tenth second"
::= { unit 4 }

unitRedRevert · mandatory

unitRedRevert OBJECT-TYPE
      SYNTAX INTEGER (0..255)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION "<Definition> The red revert in tenth seconds ( 0.0 - 25.5
            sec). This value shall provide the minimum red revert time for
            all phases (i.e. if it is greater than a phaseRedRevert object
            value, then this value shall be used as the red revert time for
            the affected phase). This object provides a minimum Red
            indication following the Yellow Change interval and prior to the
            next display of Green on the same signal output driver group.
      <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.4
      <Object Type> P
      <Unit> tenth second"
::= { unit 4 }

Meaning

Descriptions

4 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

<Definition> The red revert in tenth seconds ( 0.0 - 25.5 sec). This value shall provide the minimum red revert time for all phases (i.e. if it is greater than a phaseRedRevert object value, then this value shall be used as the red revert time for the affected phase). This object provides a minimum Red indication following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.4 <Unit> tenth second

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 2

The red revert in tenth seconds ( 0.0 - 25.5 seconds). This value shall provide the minimum red revert time for all phases (i.e. if it is greater than a phaseRedRevert object value, then this value shall be used as the red revert time for the affected phase). This object provides a minimum Red indication following the Yellow Change interval and prior to the next display of Green on the same signal output driver group.

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 3

<Definition> The red revert in tenth seconds ( 0.0 - 25.5 sec). This value shall provide the minimum red revert time for all phases (i.e. if it is greater than a phaseRedRevert object value, then this value shall be used as the red revert time for the affected phase). This object provides a minimum Red indication following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. <DescriptiveName> NTCIP-1202::ASC.unitRedRevert <DataConceptType> Data Element <Unit> tenth second

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 4

<Definition> The red revert in tenth seconds ( 0.0 - 25.5 sec). This value shall provide the minimum red revert time for all phases (i.e. if it is greater than a phaseRedRevert object value, then this value shall be used as the red revert time for the affected phase). This object provides a minimum Red indication following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.4 <Object Type> P <Unit> tenth second

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Evidence

Source records

4 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 1

unitRedRevert · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: unitRedRevert

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "unitRedRevert",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> The red revert in tenth seconds ( 0.0 - 25.5 sec). This value shall provide the minimum red revert time for all phases (i.e. if it is greater than a phaseRedRevert object value, then this value shall be used as the red revert time for the affected phase). This object provides a minimum Red indication following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.4 <Unit> tenth second\"",
    "::=",
    "{",
    "unit",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> The red revert in tenth seconds ( 0.0 - 25.5 sec). This value shall provide the minimum red revert time for all phases (i.e. if it is greater than a phaseRedRevert object value, then this value shall be used as the red revert time for the affected phase). This object provides a minimum Red indication following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.4 <Unit> tenth second"
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 2NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 2

unitRedRevert · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: unitRedRevert

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "unitRedRevert",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"The red revert in tenth seconds ( 0.0 - 25.5 seconds). This value shall provide the minimum red revert time for all phases (i.e. if it is greater than a phaseRedRevert object value, then this value shall be used as the red revert time for the affected phase). This object provides a minimum Red indication following the Yellow Change interval and prior to the next display of Green on the same signal output driver group.\"",
    "::=",
    "{",
    "unit",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "The red revert in tenth seconds ( 0.0 - 25.5 seconds). This value shall provide the minimum red revert time for all phases (i.e. if it is greater than a phaseRedRevert object value, then this value shall be used as the red revert time for the affected phase). This object provides a minimum Red indication following the Yellow Change interval and prior to the next display of Green on the same signal output driver group."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 3NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 3

unitRedRevert · optionalNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: optional.

Names: unitRedRevert

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "unitRedRevert",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "optional",
    "DESCRIPTION",
    "\"<Definition> The red revert in tenth seconds ( 0.0 - 25.5 sec). This value shall provide the minimum red revert time for all phases (i.e. if it is greater than a phaseRedRevert object value, then this value shall be used as the red revert time for the affected phase). This object provides a minimum Red indication following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. <DescriptiveName> NTCIP-1202::ASC.unitRedRevert <DataConceptType> Data Element <Unit> tenth second\"",
    "::=",
    "{",
    "unit",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "optional"
    ],
    [
      "DESCRIPTION",
      "<Definition> The red revert in tenth seconds ( 0.0 - 25.5 sec). This value shall provide the minimum red revert time for all phases (i.e. if it is greater than a phaseRedRevert object value, then this value shall be used as the red revert time for the affected phase). This object provides a minimum Red indication following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. <DescriptiveName> NTCIP-1202::ASC.unitRedRevert <DataConceptType> Data Element <Unit> tenth second"
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 4NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 4

unitRedRevert · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: unitRedRevert

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "unitRedRevert",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> The red revert in tenth seconds ( 0.0 - 25.5 sec). This value shall provide the minimum red revert time for all phases (i.e. if it is greater than a phaseRedRevert object value, then this value shall be used as the red revert time for the affected phase). This object provides a minimum Red indication following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.4 <Object Type> P <Unit> tenth second\"",
    "::=",
    "{",
    "unit",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> The red revert in tenth seconds ( 0.0 - 25.5 sec). This value shall provide the minimum red revert time for all phases (i.e. if it is greater than a phaseRedRevert object value, then this value shall be used as the red revert time for the affected phase). This object provides a minimum Red indication following the Yellow Change interval and prior to the next display of Green on the same signal output driver group. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.4 <Object Type> P <Unit> tenth second"
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.1206)

Schopp Bruce J.

Siblings (26)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.1206.4.2.1.3.1 unitStartUpFlash00
1.3.6.1.4.1.1206.4.2.1.3.2 unitAutoPedestrianClear00
1.3.6.1.4.1.1206.4.2.1.3.3 unitBackupTime00
1.3.6.1.4.1.1206.4.2.1.3.5 unitControlStatus00
1.3.6.1.4.1.1206.4.2.1.3.6 unitFlashStatus00
1.3.6.1.4.1.1206.4.2.1.3.7 unitAlarmStatus200
1.3.6.1.4.1.1206.4.2.1.3.8 unitAlarmStatus100
1.3.6.1.4.1.1206.4.2.1.3.9 shortAlarmStatus00
1.3.6.1.4.1.1206.4.2.1.3.10 unitControl00
1.3.6.1.4.1.1206.4.2.1.3.11 maxAlarmGroups00
1.3.6.1.4.1.1206.4.2.1.3.12 alarmGroupTable13
1.3.6.1.4.1.1206.4.2.1.3.13 maxSpecialFunctionOutputs00
1.3.6.1.4.1.1206.4.2.1.3.14 specialFunctionOutputTable15
1.3.6.1.4.1.1206.4.2.1.3.15 unitMCETimeout00
1.3.6.1.4.1.1206.4.2.1.3.16 unitMCEIntAdv00
1.3.6.1.4.1.1206.4.2.1.3.17 ascElevationOffset00
1.3.6.1.4.1.1206.4.2.1.3.18 unitStartUpFlashMode00
1.3.6.1.4.1.1206.4.2.1.3.19 unitUserDefinedBackupTime00
1.3.6.1.4.1.1206.4.2.1.3.20 maxUserDefinedBackupTimeContent00
1.3.6.1.4.1.1206.4.2.1.3.21 unitUserDefinedBackupTimeContentTable14
1.3.6.1.4.1.1206.4.2.1.3.22 ascClock811
1.3.6.1.4.1.1206.4.2.1.3.23 commPorts624
1.3.6.1.4.1.1206.4.2.1.3.24 maxGlobalSetIds00
1.3.6.1.4.1.1206.4.2.1.3.25 globalSetIdTable13
1.3.6.1.4.1.1206.4.2.1.3.26 unitAlarmStatus300
1.3.6.1.4.1.1206.4.2.1.3.27 unitAlarmStatus400