Status in source: mandatory.
Names: unitAlarmStatus1
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"unitAlarmStatus1",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"255",
")",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition> Device Alarm Mask 1 ( 0 = False, 1 = True) as follows: Bit 7: CoordActive - When coordination is active and not preempted or overridden. Bit 6: Local Free - When any of the CU inputs and/or programming cause it not to run coordination. Bit 5: Local Flash - When the Controller Unit Local Flash input becomes active, MMU Flash input is not active, and Flash is not commanded by the system. Bit 4: MMU Flash - When the Controller Unit MMU Flash input remains active for a period of time exceeding the Start-Up Flash time. Bit 3: Cycle Fail - When a local Controller Unit is operating in the non-coordinated mode, whether the result of a Cycle Fault or Free being the current normal mode, and cycling diagnostics indicate that a serviceable call exists that has not been serviced for two cycles. Bit 2: Coord Fail - When a Coord Fault is in effect and a Cycle Fault occurs again within two cycles of the coordination retry. Bit 1: Coord Fault - When a Cycle Fault is in effect and the serviceable call has been serviced within two cycles after the Cycle Fault. Bit 0: Cycle Fault - When the Controller Unit is operating in the coordinated mode and cycling diagnostics indicate that a serviceable call exists that has not been serviced for two cycles. Once set, a bit shall maintain its state as long as the condition exists. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.8\"",
"::=",
"{",
"unit",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition> Device Alarm Mask 1 ( 0 = False, 1 = True) as follows: Bit 7: CoordActive - When coordination is active and not preempted or overridden. Bit 6: Local Free - When any of the CU inputs and/or programming cause it not to run coordination. Bit 5: Local Flash - When the Controller Unit Local Flash input becomes active, MMU Flash input is not active, and Flash is not commanded by the system. Bit 4: MMU Flash - When the Controller Unit MMU Flash input remains active for a period of time exceeding the Start-Up Flash time. Bit 3: Cycle Fail - When a local Controller Unit is operating in the non-coordinated mode, whether the result of a Cycle Fault or Free being the current normal mode, and cycling diagnostics indicate that a serviceable call exists that has not been serviced for two cycles. Bit 2: Coord Fail - When a Coord Fault is in effect and a Cycle Fault occurs again within two cycles of the coordination retry. Bit 1: Coord Fault - When a Cycle Fault is in effect and the serviceable call has been serviced within two cycles after the Cycle Fault. Bit 0: Cycle Fault - When the Controller Unit is operating in the coordinated mode and cycling diagnostics indicate that a serviceable call exists that has not been serviced for two cycles. Once set, a bit shall maintain its state as long as the condition exists. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.8"
],
null,
null,
null,
null
]
}
- NTCIP published standard MIB annexes (reviewed modules)
· Publisher's source file: NTCIP 1202 v03A, Object Definitions for Actuated Signal Controllers (ASC) Interface Published May 2019 — original PDF
· Official record
Module: NTCIP1202-v03
See published definition above
Module imports
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter', 'null'], 'RFC1213-MIB': ['DisplayString', 'ifIndex'], 'NTCIP8004v02': ['OwnerString', 'OerString', 'devices']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP-1202v0328A.pdf — NTCIP1202-v03 (MIB transcription)
Related source files and packages: