Status in source: mandatory.
Names: shortAlarmStatus
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"shortAlarmStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"255",
")",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition> Short Alarm Mask ( 0 = False, 1 = True) as follows: Bit 7: Critical Alarm - When the Stop Time input is active. Bit 6: Non-Critical Alarm - When an physical alarm input is active. Bit 5: Detector Fault - When any detectorAlarm fault occurs. Bit 4: Coordination Alarm - When the CU is not running the called pattern without offset correction within three cycles of the command. An offset correction requiring less than three cycles due to cycle overrun caused by servicing a pedestrian call shall not cause a Coordination Alarm. Bit 3: Local Override - When any of the CU inputs and/or programming cause it not to run coordination. Bit 2: Local Cycle Zero - When running coordinated and the Coord Cycle Status (coordCycleStatus) has passed through zero. Bit 1: T&F Flash - When either the Local Flash or MMU Flash input becomes active. Bit 0: Preempt - When any of the CU Preempt inputs become active. Once set, a bit shall maintain its state as long as the condition exists. Bit 2 (Local Cycle Zero) status shall be maintained until a READ of this object occurs. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.9\"",
"::=",
"{",
"unit",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition> Short Alarm Mask ( 0 = False, 1 = True) as follows: Bit 7: Critical Alarm - When the Stop Time input is active. Bit 6: Non-Critical Alarm - When an physical alarm input is active. Bit 5: Detector Fault - When any detectorAlarm fault occurs. Bit 4: Coordination Alarm - When the CU is not running the called pattern without offset correction within three cycles of the command. An offset correction requiring less than three cycles due to cycle overrun caused by servicing a pedestrian call shall not cause a Coordination Alarm. Bit 3: Local Override - When any of the CU inputs and/or programming cause it not to run coordination. Bit 2: Local Cycle Zero - When running coordinated and the Coord Cycle Status (coordCycleStatus) has passed through zero. Bit 1: T&F Flash - When either the Local Flash or MMU Flash input becomes active. Bit 0: Preempt - When any of the CU Preempt inputs become active. Once set, a bit shall maintain its state as long as the condition exists. Bit 2 (Local Cycle Zero) status shall be maintained until a READ of this object occurs. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.9"
],
null,
null,
null,
null
]
}
- NTCIP published standard MIB annexes (reviewed modules)
· Publisher's source file: NTCIP 1202 v03A, Object Definitions for Actuated Signal Controllers (ASC) Interface Published May 2019 — original PDF
· Official record
Module: NTCIP1202-v03
See published definition above
Module imports
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter', 'null'], 'RFC1213-MIB': ['DisplayString', 'ifIndex'], 'NTCIP8004v02': ['OwnerString', 'OerString', 'devices']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP-1202v0328A.pdf — NTCIP1202-v03 (MIB transcription)
Related source files and packages: